1859 questions
msedge.exe
Wenn ich nach einem Systemscan durch Auslogics den Button für die möglichen Reparaturen drücke, erscheint die Aufforderung, bestimmte Apps erst abschalten zu lassen. Dafür wird fünfmal msedge.exe aufgezählt. Drücke ich den Button, der diese Anwendung(en) schließen soll, folgt die Mitteilung, das sei nicht möglich, ich solle es manuell machen. Alternativ kann ich anklicken, die Sache zu ignorieren.
Frage 1: Wenn ich es ignorieren kann (und gleich fünf mal), wofür ist es wichtig?
Frage 2: Wie schaltet man msedge.exe manuell ab?
Frage 1: Wenn ich es ignorieren kann (und gleich fünf mal), wofür ist es wichtig?
Frage 2: Wie schaltet man msedge.exe manuell ab?
Auslogic Defrag Issue
Defrag hung up on file C:\$Extend\$UsnJml:$J
Went from 3.8% to 13.30% completed and took over 22 hours as you can see in the screenshot attachment.
How can I get defrag around this issue so it can complete the optimization?
Thank you
Dennis Miller
Content hidden to protect privacy
P.S. Why isn't Auslogics a subcategory option?
Laptop slow on startup
Hi there,
I have a new laptop with a high spec. However, for the first hour each day, it runs as slowly as an old 486 machine, then suddenly it catches up with itself and runs superbly all day.
I've checked everything:
Programs in the Start menu
ESET and OneDrive behaviour
Updates behaviour
BIOS settings
Everything I can think of and a hundred things I've learned about...
I've uninstalled some of the programs, but now I'm thinking I should uninstall everything and reinstall Windows 10.
Any ideas before I try the Windows 10 reinstall?
NOTES (1) I did try the upgrade to Windows 11 when I first got the machine, however, I didn't like it and went back to Windows 10; it was slow in the short time that I ran Windows 11 too, so I don't konw if that means something, like maybe it's a hardware issue? (2) It was a demo machine in the store where I bought it.
I have a new laptop with a high spec. However, for the first hour each day, it runs as slowly as an old 486 machine, then suddenly it catches up with itself and runs superbly all day.
I've checked everything:
Programs in the Start menu
ESET and OneDrive behaviour
Updates behaviour
BIOS settings
Everything I can think of and a hundred things I've learned about...
I've uninstalled some of the programs, but now I'm thinking I should uninstall everything and reinstall Windows 10.
Any ideas before I try the Windows 10 reinstall?
NOTES (1) I did try the upgrade to Windows 11 when I first got the machine, however, I didn't like it and went back to Windows 10; it was slow in the short time that I ran Windows 11 too, so I don't konw if that means something, like maybe it's a hardware issue? (2) It was a demo machine in the store where I bought it.
Auslogics BoostSpeed 12について
「Auslogics BoostSpeed Pro12」「Auslogics Driver Updater」と「Disk Defrag Ultimate」のボタンがありますが、インストールすると別途、料金が発生するのでしょうか？
ignoring cache and thumbnails
Hi guys,
I want BS 12 to ignore clearing/deleting image thumbnails and chrome cahe.
How do I do that?
Please let me know
Regards
Luis
I want BS 12 to ignore clearing/deleting image thumbnails and chrome cahe.
How do I do that?
Please let me know
Regards
Luis
freeing Memory usage
Hi Guys,
I have noticed some apps reserves too much memory for itselfs like Google Chrome,
is it possible to get Auslogic Bootspeed 12 to free some of the memory on a regular basis, for example when it reaches 85% of usage?
also it would be nice to improve memory and CPU by disabbling things that are not required when we want to get out more performance from our PC,
The BS12 RAM and CPU optimization seems to be going into that direction, but require a little bit of more control over processes?
I have noticed some apps reserves too much memory for itselfs like Google Chrome,
is it possible to get Auslogic Bootspeed 12 to free some of the memory on a regular basis, for example when it reaches 85% of usage?
also it would be nice to improve memory and CPU by disabbling things that are not required when we want to get out more performance from our PC,
The BS12 RAM and CPU optimization seems to be going into that direction, but require a little bit of more control over processes?
Windows search indexer
Hi there,
Windows search indexer seems to be taking forever to finish.
I have restarted the process, limited the number of files to index and even disable the AV to allow indexer to index faster.
But after a while it comes back and keeps eating away between 60% to 24% of CPU
Any fix for that? runing on (win11 64 bits.
Windows search indexer seems to be taking forever to finish.
I have restarted the process, limited the number of files to index and even disable the AV to allow indexer to index faster.
But after a while it comes back and keeps eating away between 60% to 24% of CPU
Any fix for that? runing on (win11 64 bits.
Right Click opens very slowly
Right click on file explorer options (such as copy) takes forever to load. Right click on any file takes forwver to load options.
Tried to purchase Boostspeed Pro but website would not advance to chaeckout?
Tried to purchase Boostspeed Pro but website would not advance to chaeckout?
I am unable to switch to keyboard Chinese Input Method after using Auslogics BootstSpeed
After using the Auslogics BootstSpeed and the function of cleaning the Registry files, I found that I am not able to switch back to Chinese input method anymore and I can only type in English. I tried to type the hotkey "Left Ctrl +Shift", nothing happened. I tried "Ctrl + Space" or "Win + Space", also nothing happended. The small icon at shows "EN" at the bottom right corner was disappeared (see attached).
I tried to find the file "ctfmon.exe" and excute, but it doesn't work. I tried to add this command at the startup, it also doesn't work.
I tried to delete the language pack and reinstall, it also doesn't work.
The only moment that I can see the langauge menu comes out again is that when I was in the situation of "User Account Control" when the computer requires administrator status to run some program (see attached).
I am pretty desperate and really need your help. Thank you!
I tried to find the file "ctfmon.exe" and excute, but it doesn't work. I tried to add this command at the startup, it also doesn't work.
I tried to delete the language pack and reinstall, it also doesn't work.
The only moment that I can see the langauge menu comes out again is that when I was in the situation of "User Account Control" when the computer requires administrator status to run some program (see attached).
I am pretty desperate and really need your help. Thank you!
internet hızlandırma yaptıgımda hızım düşüyor
internet hızlandırma yaptıgımda hızım düşüyor 50 mbits fiber internetim var manuel ayarları bilmiyorum yardımcı olurmusunuz acaba?
boite mail
Bonjour j aurais besoin que vous m aidiez , je peux ouvrir ma boite mail depusi plusieurs jours la page était a a s'ouvrir donc je me deconnectais je remettais mon identifiants et mot de passe mais ce matin pu rien l ordi ne me donne pu la page poiur mettre ces infos martine_viellet@sfr.fr
Auslogics Boostspeed 12
My computer is a 64 bit machine which can run 32 bit programs. My computer is running Boostspeed 12 using 32 bit versions of all its programs instead of the 64 bit version. Is this the reason why my computer is taking over an hour to startup in the morning with the disk using 93% to the usual 100% all the time? Or, is the problem due to too much disk thrashing since it appears that all the startup programs start up immediately instead of being staggered per the scheduler? This problem started when I had to uninstall Boostspeed 12 and reinstall it per the Auslogics support person.
Gah. Cannot access Report
I have not been able to view any of the reports in the Auslogics software. I just get a blank window in Foxfire.
Auslogics BoostSpeed software itself
I have BoostSpeed perform Dashboard, Disk Defrag, Protect. Internet Optimizer and other checks by schedule. All is good.
However, directory "c:\ProgramData\Auslogics\BoostSpeed\12.x\Reports" becomes cluttered with .html, .xml and other reports produced by these various check tools.
How can I set BoostSpeed to automatically clean up after itself by deleting ancient reports over some arbitrary age? There's about a Gig of files in this directory on this machine and some 3Gb on another.
However, directory "c:\ProgramData\Auslogics\BoostSpeed\12.x\Reports" becomes cluttered with .html, .xml and other reports produced by these various check tools.
How can I set BoostSpeed to automatically clean up after itself by deleting ancient reports over some arbitrary age? There's about a Gig of files in this directory on this machine and some 3Gb on another.
random shut down of my laptop
recently my sony vaio laptop strted shutting of randomly. can you help.
DSN resolution failing
I have an older PC and thus tought it would be good to get Auslogics Bootspeed 13
I did a scan and followed the recomendations
however I now regularily get the issue that the internet connection to my DNS server is gone
he tells me that the addr. cannot be resolved (see also screen shot in doc)
it seems to go away after a while, without me taking action? - but when it happens it hinders a lot.
could you please tell me that this can ideed be due to cleaning caches, optimizing settings though Bootspeed?
where to fix/repair?
not sure it is the Auslogic cleaning - but it started at the same time
I am using Proximus as provider in Belgium and have the Norton 360 suite installed
running windows 10 (PC seems a bit old to run W11, but it did the trick quite well - till recently :-( )
issue happens on WIFI and Cabled connection
I did a scan and followed the recomendations
however I now regularily get the issue that the internet connection to my DNS server is gone
he tells me that the addr. cannot be resolved (see also screen shot in doc)
it seems to go away after a while, without me taking action? - but when it happens it hinders a lot.
could you please tell me that this can ideed be due to cleaning caches, optimizing settings though Bootspeed?
where to fix/repair?
not sure it is the Auslogic cleaning - but it started at the same time
I am using Proximus as provider in Belgium and have the Norton 360 suite installed
running windows 10 (PC seems a bit old to run W11, but it did the trick quite well - till recently :-( )
issue happens on WIFI and Cabled connection
установить андройд 13
мой пк не видит нокиа 503- андройд самостоятельно установить не могу.прошу установить андройд 13 на нокиа 503 через ноутбоок самсунг R540 ОН ПОДКЛЮЧЕН ПО КАБЕЛЮ USB.
Registry Defrag
I am being bombarded to upgrade this software but there is this error message that keeps coming upand the Defrag process is never completed. Error:;- 21470244894. Task Schudeler. ERROR Code 0x8007002
ERROR Save Task (the system cannot find te file specified)
ERROR Save Task (the system cannot find te file specified)
LOST APPS
I got myself in a bind and I resorted to installing a backup file.
Unfortunately I overlokked the advice that apps would be lost.
I now have a list of about 60 apps listed as "Apps removed while resetting your PC", including Auslogics programs.
Is ther any way that I can recover those apps?
I'm using Windows 10.
Cheers
Bill Wacher
Unfortunately I overlokked the advice that apps would be lost.
I now have a list of about 60 apps listed as "Apps removed while resetting your PC", including Auslogics programs.
Is ther any way that I can recover those apps?
I'm using Windows 10.
Cheers
Bill Wacher
Where to find the Optimize Tab
In Auslogics Boostpeed 13 the Optimize Tab disappears in Advanced Mode after closing the app and relaunching Boostpeed 13. I tend to forget or cannot find the tool that creates the Optimize Tab. Which tool houses or creates the Optimize Tab?
защита
при работе с функцией "защитить" выходит сообщение о сбое работы программы. Кнопка "защита" не устанавливается и не фиксируется на верхней строке .
по рекомендащиям программы ,антивирус виндос недаёт внести программу в опцию разрешоных.Функция "защита" неработает должным образом.раннее хорошо работала!
по рекомендащиям программы ,антивирус виндос недаёт внести программу в опцию разрешоных.Функция "защита" неработает должным образом.раннее хорошо работала!
cant update due to virtual box
hi
i cant update my windows due to virtual box install
i have uninstall thw virtual box already but still cany install
i cant update my windows due to virtual box install
i have uninstall thw virtual box already but still cany install
Bricked my HP Evo Prod ID 669a1ua after driver update
So I'm old-school (DOS Win 3.11) computer-savvy...but not much more (never heard of secure boot/TPM/Bitlocker - until I used your program to update a bunch of drivers (probabally the BIOS) and I got BSOD demanding Bitlocker key and after 3 days found no darn way around it. Finally went to HP Cloud recovery (supposed to resture factory config) but this tool does not work for me (gets stuck in a boot loop...internet search did not reveal fix/work-around that I haddn't tried; i.e at the BIOS I turned off Secure boot, allowed USB Boot, made that the first boot device...even tried re-directing the boot loader to the flash drive...but I digress).
Only thing left seemed to be a clean install using flash drive media from MS website to download installer for W11 and then het drivers from HP. So...Flash installer W11 called-up a view of the diskpart showing X: as "System" with like 200MB, C: is the main partition with ~433GB and is BITLOCKED... and then there is a small Recovery partition.
So the only partition I might use was the Bitlocked one...thus I had to delete it and ReFormat to do the clean install.
...So far so good!
Now I go top HP and get my wlan drivers...install from recovery CMD using pnpuil...and I fire-up Windows.
I get the intro screen to select my language, then keyboard, then it hangs at "lets get you connected to the internet"
so - TWO questions: (1) what othe (critical) drivers might I need to get online? Here's the list of possibilities: https://support.hp.com/us-en/drivers/selfservice/closure/hp-spectre-x360-16-inch-2-in-1-laptop-pc-16-f1000/2101006126/model/2101006145 and
(2) I tried just installing "all" of the available drivers...but I ran out of room???
It seems that even when I'm at he C:\ prompt - everything I install actually goes to the X: partition [which has run out of space now...] Is there some kind of start-up initialization pointer thats redirrecting "System" traffic/commands to X: (instead of c:\Windows\System\System32 - where drivers usually reside?
- If so - how do I change it?
- If not then might it relate somehow to the fact that I never really "completed" the install process?
Also FYI - now that I have gotten around Bitlocker I tried the HP Cloud recovery again and got the same blind boot loop.
Thanks for your help
-Adam
Only thing left seemed to be a clean install using flash drive media from MS website to download installer for W11 and then het drivers from HP. So...Flash installer W11 called-up a view of the diskpart showing X: as "System" with like 200MB, C: is the main partition with ~433GB and is BITLOCKED... and then there is a small Recovery partition.
So the only partition I might use was the Bitlocked one...thus I had to delete it and ReFormat to do the clean install.
...So far so good!
Now I go top HP and get my wlan drivers...install from recovery CMD using pnpuil...and I fire-up Windows.
I get the intro screen to select my language, then keyboard, then it hangs at "lets get you connected to the internet"
so - TWO questions: (1) what othe (critical) drivers might I need to get online? Here's the list of possibilities: https://support.hp.com/us-en/drivers/selfservice/closure/hp-spectre-x360-16-inch-2-in-1-laptop-pc-16-f1000/2101006126/model/2101006145 and
(2) I tried just installing "all" of the available drivers...but I ran out of room???
It seems that even when I'm at he C:\ prompt - everything I install actually goes to the X: partition [which has run out of space now...] Is there some kind of start-up initialization pointer thats redirrecting "System" traffic/commands to X: (instead of c:\Windows\System\System32 - where drivers usually reside?
- If so - how do I change it?
- If not then might it relate somehow to the fact that I never really "completed" the install process?
Also FYI - now that I have gotten around Bitlocker I tried the HP Cloud recovery again and got the same blind boot loop.
Thanks for your help
-Adam
Fading icon
Hello and thank you for your hardwork
when I open Microsoft store and the apps i download from it, they open and work fine but their icon in taskbar is fading away.
I repair and reset the Microsoft store but it didnt work.
when I open Microsoft store and the apps i download from it, they open and work fine but their icon in taskbar is fading away.
I repair and reset the Microsoft store but it didnt work.
transfert photos depuis icloud
hi
depuis ce matin quand je telecharge mes photos depuis icloud elles sont dans un format different
extension heic
et je n'arrive plus a les lire
please i want to have a french answer ty
depuis ce matin quand je telecharge mes photos depuis icloud elles sont dans un format different
extension heic
et je n'arrive plus a les lire
please i want to have a french answer ty
computer shuts off
My computer unexpectandlty shuts off after 15 minutes. I check the cpu usage and its low. Not sure if the system is overheating.
boostspeed tray icon
What is the little red dot that appears on your tray icon? When it appears, what does it mean? How do you get rid of the red dot?
Also, my subscription is expiring sson. I will renew if you can give me a discount/promo code. Thank you in advance. Scott
Also, my subscription is expiring sson. I will renew if you can give me a discount/promo code. Thank you in advance. Scott
Auslogics Bitreplica vs
Dear Auslogics Team,
Please, tell me: can I use Auslogics Bitreplica to create the full system and disk images?
Thank you.
With regards.
Richard.
Please, tell me: can I use Auslogics Bitreplica to create the full system and disk images?
Thank you.
With regards.
Richard.
How to setup RAID 1 on computer with MSI
I have a pair of brand new Samsung 990 Pro 2TB each NVME M.2 drives
Can you please help me with a step by step guide of How to create RAID 1 istallation and setting up so that I can install and run Windows 11 Pro 22H2 setup with that arrangement. I have already backed up all my current Samsung 980Pro 1Tb M.2 Drive and will coppy from my backups on to my new drives in Raid 1
Thank you.
Denis BATU (DeltaBravo)
Can you please help me with a step by step guide of How to create RAID 1 istallation and setting up so that I can install and run Windows 11 Pro 22H2 setup with that arrangement. I have already backed up all my current Samsung 980Pro 1Tb M.2 Drive and will coppy from my backups on to my new drives in Raid 1
Thank you.
Denis BATU (DeltaBravo)
Boostspeed Benachrichtigungsanzeigen
Hallo wertes Auslogics-Boostspeed-Team,
ich möchte gerne nach jedem Starten oder Neustarten meines PCs (Win10 Enterprise LTSC) angezeigt bekommen, wie lange das Starten dauerte. Diese Benachrichtigung wird mir bisher nur manchmal angezeigt oder wenn ich Boostspeed nach dem Hochfahren selbst starte; aber auch dann dauert es eine Weile, bis die Benachrifhtigung erscheint und auch hier erscheint sie nur manchmal.
Zudem möchte ich bitte gerne wissen, welche Taskscheduler und Hintergrundaufgaben von Microsoft Corporation ich im Auslogics Boostspeed Startup Manager deaktivieren kann, sodass das Windows dennoch fehlerfrei läuft; habt ihr hierfür eine "Pauschale"?
Vielen Dank vorab für eure Mithilfe.
Freundlichst, Wayseer
ich möchte gerne nach jedem Starten oder Neustarten meines PCs (Win10 Enterprise LTSC) angezeigt bekommen, wie lange das Starten dauerte. Diese Benachrichtigung wird mir bisher nur manchmal angezeigt oder wenn ich Boostspeed nach dem Hochfahren selbst starte; aber auch dann dauert es eine Weile, bis die Benachrifhtigung erscheint und auch hier erscheint sie nur manchmal.
Zudem möchte ich bitte gerne wissen, welche Taskscheduler und Hintergrundaufgaben von Microsoft Corporation ich im Auslogics Boostspeed Startup Manager deaktivieren kann, sodass das Windows dennoch fehlerfrei läuft; habt ihr hierfür eine "Pauschale"?
Vielen Dank vorab für eure Mithilfe.
Freundlichst, Wayseer
Rregister Editor
Why is your software allready more then 4 hours busy scanning my registry. The first 1200 entries went quick but after that things are slowing down. I have 12.186 registry keys
Recommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7