error message
I keep getting this error it wont down load
Notifications
I can not find a way to BLOCK New Auslogics Notifications of upgrades . I have blocked Registry notifications tring to end pop ups of Auslogic Up-grades . IF you can not seem to have FREE upgrades for presently purchased Auslogics 11 , then simply place your up grades into an Auslogics 12 and STOP bugging members with you desiring money for upgrades . Your Subcategory answer question makes NO sense ! This is an Auslogics 11 Programming delima ,none of the subcategory comment shown above have nothing to do with Auslogics 11 , that I know of, as of yet.
Настройка RDP
Windows Server 2016. Как настроить удаленный доступ к этому серверу через RDP? Все где надо включено, а доступа нет. Выдает ошибку "Произошла внутренняя ошибка". Причем к другому серверу с Windows Server 2016 доступ есть.
Auslogics Configuration of Windows old version
I remember that I had an option in previous versions that allowed me to change things in Windows like Legal Rights, or Comments page before login to Windows or right after it.
However, I cant find what is that option in the current version. Could you please help me out?
I prepare storyboards for training and I would like to have a page with some personal information.
Thanks in advance.
Fernando Salmeron
viewing bottom of page.
Start buttons etc., at bottom of page are often off the page.
taskbar is at top of screen
reducing page size ratio is no help
Please help.
Richiesta di un consiglio
Buongiorno,
desideravo un Vs. consiglio:
sono già in possesso di Auslogics Disk Defrag 9.
Per migliorare in generale le prestazioni del mio computer sono indeciso se acquistare:
A) Driver Updater
oppure
B) BoostSpeed 11
domanda: BoostSpeed 11 include già anche Driver Updater ?
... non vorrei acquistare programmi uguali ...
Cosa mi consigliate di acquistare? Driver Updater oppure BoostSpeed 11 ?
Grazie e un cordiale saluto.
старая программа на дисе (с) 64 битная называется 7 максисальная
как я могу убрать лишние файлы и програмы остатки 64 битной системы,очистить диск (с)
Microsoft Visial C++
Hi
I keep getting a message pop up (see attatched)
I have no idea what I have done to cause it to pop up, I also have no idea how to cure it. I have the latest DirectX and as far as I know everything else is up-to-date including Windows.
Most of the time I just hide the message because if I cancel it, it pops back up. However it is now preventing me from launching Unreal Engine so I cannot ignore it any longer I need to sort it out.
Please priovide your answer in simple terms as although I am computer savvy I am no master under the bonnet,programming etc.
bootspeed 5
I have bootswpeed 5 on windows 7. I recently purchases 11 for other windows 10 computer.. I downloaded 11 on windows 7 and now have access to bootspeed 5 and 11 on this 7 computer. Revo uninstaller does not show 5. best way to uninstall bootspeed 5? thanks, jimz
Offline Defragmentation
Is it possible to do offline defragmentation of system files using BoostSpeed 11
my internal speakers are not working anymore
Hi, After purchasing and downloading auslogics boostspeed, driver update, defragmenter and anti-malware, my windows 10 laptops interal speakers are no longer working or even being detected by my computer. I have no idea how to fix this to get them re-enabled. Please help!!
Sound just stopped again
I have had this problem multiple times.
Usually I just delete all sound drivers using Device Mgr.. then restart..
But..
Why does sound fail?
Is there a way to fix through AusLogics?
Cannot install new version of Pro v11.xxx
Whenever I get the message "a new version 11.~ is available, the download completes but will not install.
Check snip pic attached.
Double Clicking
Lately (last several weeks) the vast majority of my on-screen selections require a 'double click' on the mouse in order for advancing. How can I correct this so movement on-screen can be accomplished with just a single click on the mouse? Could this be an associated problem with Boostspeed's notice of "Hish system resource usage detected' and I "might experience extreme PC slowdown"?
used auslogics freeupdater tool after that was given message please wait while updating.
I have premium I used the auslogics free updater to download updates and dnow my computer is bootlooping it dosent even get to the windows screen what can I do I have all sorts of problems with your software please adise what I can do pc boots then turns off boots then turns of or tries to boot,this was fater I updated a driver that I was told was out of date by your system.
Проблема со спящим режимом
Здравствуйте! Исчез совсем из настроек системы спящий режим, после работы программы, помогите исправить, заранее спасибо за безпокойство...
Медленно рабоатет ноутбук
Windows 10 на ноутбуке стал медленне работать. Программы долго открываются и в самих программах операции выполняются дольше. Как можно решить проблему, а потом поддерживать компьютер в рабочем состоянии?
Не работает микрофон
Добрый день.
После очистки и оптимизации компьютера с помощью Auslogics BoostSpeed перестал работать микрофон - и встроенный, и в любых наушниках. Система его видит, во всех настройках разрешено его использование, но на звук никак не реагирует.
На всякий случай прикладываю скрин менеджера программы - в заблокированных файлах есть куча файлов, связанных с драйвером звуковой карты Conexant, после исключения их из списка блокировки все равно не работает. Все это время звук в наушниках и без них есть.
DSN resolution failing
I did a scan and followed the recomendations
however I now regularily get the issue that the internet connection to my DNS server is gone
he tells me that the addr. cannot be resolved (see also screen shot in doc)
it seems to go away after a while, without me taking action? - but when it happens it hinders a lot.
could you please tell me that this can ideed be due to cleaning caches, optimizing settings though Bootspeed?
where to fix/repair?
not sure it is the Auslogic cleaning - but it started at the same time
I am using Proximus as provider in Belgium and have the Norton 360 suite installed
running windows 10 (PC seems a bit old to run W11, but it did the trick quite well - till recently :-( )
issue happens on WIFI and Cabled connection
установить андройд 13
Registry Defrag
ERROR Save Task (the system cannot find te file specified)
LOST APPS
Unfortunately I overlokked the advice that apps would be lost.
I now have a list of about 60 apps listed as "Apps removed while resetting your PC", including Auslogics programs.
Is ther any way that I can recover those apps?
I'm using Windows 10.
Cheers
Bill Wacher
cant update due to virtual box
i cant update my windows due to virtual box install
i have uninstall thw virtual box already but still cany install
защита
по рекомендащиям программы ,антивирус виндос недаёт внести программу в опцию разрешоных.Функция "защита" неработает должным образом.раннее хорошо работала!
Bricked my HP Evo Prod ID 669a1ua after driver update
Only thing left seemed to be a clean install using flash drive media from MS website to download installer for W11 and then het drivers from HP. So...Flash installer W11 called-up a view of the diskpart showing X: as "System" with like 200MB, C: is the main partition with ~433GB and is BITLOCKED... and then there is a small Recovery partition.
So the only partition I might use was the Bitlocked one...thus I had to delete it and ReFormat to do the clean install.
...So far so good!
Now I go top HP and get my wlan drivers...install from recovery CMD using pnpuil...and I fire-up Windows.
I get the intro screen to select my language, then keyboard, then it hangs at "lets get you connected to the internet"
so - TWO questions: (1) what othe (critical) drivers might I need to get online? Here's the list of possibilities: https://support.hp.com/us-en/drivers/selfservice/closure/hp-spectre-x360-16-inch-2-in-1-laptop-pc-16-f1000/2101006126/model/2101006145 and
(2) I tried just installing "all" of the available drivers...but I ran out of room???
It seems that even when I'm at he C:\ prompt - everything I install actually goes to the X: partition [which has run out of space now...] Is there some kind of start-up initialization pointer thats redirrecting "System" traffic/commands to X: (instead of c:\Windows\System\System32 - where drivers usually reside?
- If so - how do I change it?
- If not then might it relate somehow to the fact that I never really "completed" the install process?
Also FYI - now that I have gotten around Bitlocker I tried the HP Cloud recovery again and got the same blind boot loop.
Thanks for your help
-Adam
Where to find the Optimize Tab
Fading icon
when I open Microsoft store and the apps i download from it, they open and work fine but their icon in taskbar is fading away.
I repair and reset the Microsoft store but it didnt work.
transfert photos depuis icloud
depuis ce matin quand je telecharge mes photos depuis icloud elles sont dans un format different
extension heic
et je n'arrive plus a les lire
please i want to have a french answer ty
computer shuts off
boostspeed tray icon
Also, my subscription is expiring sson. I will renew if you can give me a discount/promo code. Thank you in advance. Scott
Auslogics Bitreplica vs
Please, tell me: can I use Auslogics Bitreplica to create the full system and disk images?
Thank you.
With regards.
Richard.
How to setup RAID 1 on computer with MSI
Can you please help me with a step by step guide of How to create RAID 1 istallation and setting up so that I can install and run Windows 11 Pro 22H2 setup with that arrangement. I have already backed up all my current Samsung 980Pro 1Tb M.2 Drive and will coppy from my backups on to my new drives in Raid 1
Thank you.
Denis BATU (DeltaBravo)
Boostspeed Benachrichtigungsanzeigen
ich möchte gerne nach jedem Starten oder Neustarten meines PCs (Win10 Enterprise LTSC) angezeigt bekommen, wie lange das Starten dauerte. Diese Benachrichtigung wird mir bisher nur manchmal angezeigt oder wenn ich Boostspeed nach dem Hochfahren selbst starte; aber auch dann dauert es eine Weile, bis die Benachrifhtigung erscheint und auch hier erscheint sie nur manchmal.
Zudem möchte ich bitte gerne wissen, welche Taskscheduler und Hintergrundaufgaben von Microsoft Corporation ich im Auslogics Boostspeed Startup Manager deaktivieren kann, sodass das Windows dennoch fehlerfrei läuft; habt ihr hierfür eine "Pauschale"?
Vielen Dank vorab für eure Mithilfe.
Freundlichst, Wayseer
Rregister Editor
Recommended
DOWNLOAD NOW
Download size: 12,8 Mb