1859 questions

Corel Paintshop Pro 2020

It seems each time Boostspeed runs, I have to reload Corel Shop 2020 because it will not statr. I thought this might be a corel problem because the same thing was happening with the previous version.
However, the issue is happing with the 2020 version.
There miust be some issue with the files that BoostSpeed is negating.

983 views
Sep 21, 2020 at 08:18 PM

ssd external defrag

I have an external drive, SSD, attached to my computer thorugh usb3.
When I try to optimize it, it takes forever, and seems not to move along....is this an issue? or how can I defeag the external?

Thank you
1370 views
Sep 21, 2020 at 01:37 AM

яркость

у меня на ноутбуке делл после обновления программы монитора пропал ползунок настройки яркости есть только ночной режим ина клавиатуре тоже не работает настройка яркости что делать уже не знаю
1174 views
Sep 18, 2020 at 01:12 PM

Adding WiFi to HP EliteDesk G2 TWR that does not seem to have WiFi built-in

I have HP EliteDesk G2 TWR with motherboard specs per below. I need to have WiFi as a back-up to existing LAN hardwired internet connection. It does not seem to have WiFi as option built-in. I bought Netgear Model A7000 AC1900 WiFi USB adaptor, and i installed software etc,,, but that does not seem to work either. Per motherboard specs below there would appear to be two open slots available.

1. Any suggestions as to getting the external WiFi USB adaptor that I already bought to work?

2. or do I need to get/install some sort of PCI wifi adaptor/card?
Or what... help?

Slot3 / X1PCIEXP2: Available
Slot4 / X4PCIEXP: Available


Name, Value
Motherboard
Manufacturer: HP
Product: 8053
Version: KBC Version 05.39
Serial Number: PESUC0ECY9Y2X0
Ports: 38
Slots: 4

Ports
Port Connector 0: Keyboard Port
Port Connector 1: Mouse Port
Port Connector 2: Serial Port 16550A Compatible
Port Connector 3: Serial Port 16550A Compatible
Port Connector 4: Video Port
Port Connector 5: Video Port
Port Connector 6: Video Port
Port Connector 7: Network Port
Port Connector 8: Audio Port
Port Connector 9: Audio Port
Port Connector 10: Audio Port
Port Connector 11: Audio Port
Port Connector 12: Audio Port
Port Connector 13: USB
Port Connector 14: USB
Port Connector 15: USB
Port Connector 16: USB
Port Connector 17: USB
Port Connector 18: USB
Port Connector 19: USB
Port Connector 20: USB
Port Connector 21: USB
Port Connector 22: USB
Port Connector 23: USB
Port Connector 24: 8251 Compatible
Port Connector 25: 8251 Compatible
Port Connector 26: 8251 Compatible
Port Connector 27: 8251 Compatible
Port Connector 28: 8251 Compatible
Port Connector 29: None
Port Connector 30: None
Port Connector 31: None
Port Connector 32: None
Port Connector 33: None
Port Connector 34: None
Port Connector 35: None
Port Connector 36: None
Port Connector 37: Keyboard Port

System Slots
Slot1 / X16PCIEXP: In Use
Slot2 / X1PCIEXP1: In Use
Slot3 / X1PCIEXP2: Available
Slot4 / X4PCIEXP: Available

BIOS Details
Name: N01 Ver. 02.47
Manufacturer: HP
Version: N01 Ver. 02.47
Copyright: HPQOEM - 0
Date: 4/28/2020
Size: 16,384 KB
1693 views
Sep 16, 2020 at 05:48 PM

BoostSpeed actions on Windows 10 Shut Down

I use Microsoft Office 2003 and one of the features maintains a list of recently used files in each of Word, Excel and Outlook. Recently the recently used files list in these three programs has been cleared following shut down at the end of the day so that when I restart my computer the next day the recently used file lists are empty and start being repopulated during the course of the day but again are cleared following the final shut down of the day.

My question is - is there a feature of Boostspeed that is clearing these lists and how do I change it so that it doesn't happen?

Regards, Harry McBride

1168 views
Sep 14, 2020 at 01:34 AM

Bluetooth

Hello, I can't turn on Bluetooth, the device is visible in the device Manager, Windows 10 does not turn on

1861 views
Sep 13, 2020 at 10:19 AM

Fix Windows update error code 0x80073712

How do I fix Windows Update error code 0x80073712 using your BoostSpeed 11 software on my Windows 10 Pro computer. Your article on fixing this error code said you could repair is problem with your BoostSpeed 11 program.

Thank You.

986 views
Sep 12, 2020 at 09:31 PM

Bateria

Con el App de AUSLOGICS BOOSTSPEED 11, hice una optimización, sobre la bateria para que cargue unicamente hasta el 90% quisiera poder modificar esto pero no se en que parte lo puedo hacer, gracias
1410 views
Sep 11, 2020 at 04:06 PM

Microsoft Teredo Tunneling adapter not working

My adapter has stopped. I need to get it up and running again..
1201 views
Sep 11, 2020 at 04:36 AM

Bad performance Windows 10

Hi Auslogics,

Is there anything i can do for make my pc much responsive and no slowdown? for free

everytime i open anything that using high resources (Google Chrome, firefox, editing app, another apps)
its fine, nothing slow with the google chrome and the apps
but when i closing the Apps that already took up my PC resources 70%,
the CPU and RAM usage back normal

and the windows is very very slow
like the Start Menu is Delay , File explorer slow launch (launch when 5-6 seconds)

anything i can do?
thanks
1290 views
Sep 09, 2020 at 12:35 PM

JBL Bluetooth Issue

JBL Cannot connected as Stereo Device
1482 views
Sep 09, 2020 at 12:16 PM

issue while booting

When I turn on my pc,
after windows logo a blank screen comes for about 3-4 min.
then a "please wait" loop comes which lasts for about 1 min.

My PC: It's a prebuilt "ACER Veriton series."

1206 views
Sep 09, 2020 at 04:33 AM

after tweaking system using Auslogics, sound doesnt work. help pls

when i try to play an audio file, it shows up with this: 0x80040154

kindly help

thanks
1130 views
Sep 09, 2020 at 03:56 AM

Laptop freezing

Recently my laptop has been freezing. Then I have to turned off the laptop manually and restart. Why is that happening?

1411 views
Sep 09, 2020 at 02:34 AM

cleaning done or not done?

Each time when I do a manual clean of: one click scanner, reg cleaner, duplicate file finder, deep disk cleaner, the page displays the following message.
This has not been cleaned since (date), Also, immediately after the internet optimiser has been run and optimised and rebooted it requires another scan to optimise straight after the reboot.
I looks as if the program does all the tasks required but does not record it as being done.
Your comments appreciated
Bill

1227 views
Sep 06, 2020 at 05:37 AM

system is slow

the system is too damn slow, everythin keeps crashing and all tha stuff... yesterday i encountered a disk read error
plz help.. i had also bought/registered em auslogics driver installer but it kept on crashing and last hour an error came up saying some f***in file was missing and shit.I DIDNT EVEN TOUCH ANYTHIN. i hav avg anti antivirus (thot) and kaspersky tdss killerso yeaa i ran a deep scan and a root kit scan but alas no virus was found either. SO PLZZ HELPP my ames keeeeeep on crashing and stuff
whenever i open somethin well, it only stays 'opened' for like a min or half and then my whole system freezes. i had earlier enabled that whenever there gonna be critical error, bootspeed's gonna restart my system and stuff
SO THAT MEANS WELL IF MY SYSTEM KEEPS ON RESTARTING ON ITS OWN THEN IT EXPERIENCING SOME CRITICAL ERRORS
plz helpp i hv had enough of this shit plzzzz !
i cant even add a file cos my system keeps hangin so i cant even snap a screenshot
plzzz devs help plzz
1415 views
Sep 05, 2020 at 08:29 AM

High System Resource Messages with my laptop causes Chrome Browser freezing.

I know Chrome is a resource hog but how can I control system resources to mitigate this? My HP ENVY laptop has 16 GB of RAM.
1130 views
Sep 03, 2020 at 09:53 AM

game crash

Hello. When you start any game while the program is running in the background, it crashes to the desktop. When you exit the program, there is no departure. Is this what you should do when starting games? Game optimization has been activated.
1227 views
Sep 02, 2020 at 06:27 PM

Sounds like a quiet popping when playing music offline or online.

Also videos like youtube or anything will glitch for a second at random for no reason. I have factory reset this PC and have not fixed it yet. I don't know if it's windows 10 or this new PC but it is quite annoying My old PC that I gave away never had this problem, but it was also windows 7. Also I don't know the device or subcategory, but I had to put something :|
1174 views
Sep 02, 2020 at 09:21 AM

slow internet

Since installing your software and optimizing my internet has gradually slowed down to a crawl. After checking all other issues I could think of I went to rescue centre and reverted back to only restore date available which in itself was unusual as when going through the various tools a couple of weeks ago there were 3 or 4 restore dates. After doing a restore the internet speed improved but after a day or so it is right back to a crawl. I do run a VPN for security but disabling the VPN makes no difference. Any suggestions as where to look?

ps - just checked off the realtek as I have no idea where the problem is
1129 views
Sep 01, 2020 at 11:25 PM

My Gmail account in Windows mail won't send.

Hello, and Merry Christmas. My gmail in windows10 will receive mail, but will no longer send. I've tried deleting and re-installing trhe account several times. Any ideas? I have no problem using the Gmail website, but I like the Windows10 default mail.
I wish you rain, and lots of rain!
George

1440 views
Dec 25, 2019 at 07:43 AM

Installation error message

Now and then when I try to install something I get the error message in the sample pop up. I need this sorting out as I have tried many things to get rid of it to no avail. I do not even know what it is asking for. It claims is on another disk does it mean disk or harddrive? I am installing things on an extension drive as my C: is full. are there files on C: that it needs to install and maybe that is why it is asking me. Can I duplicate those files so that it can use the extension drive?
This message prevents me from installing certain programs that I need so like I said I need the relevant files that it is asking me for.
1439 views
Jul 07, 2020 at 04:16 AM

Printer does not print...

Greetings,
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.

When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.

By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!

Thank you... hope you can help...
Al Sosa
1436 views
Mar 25, 2021 at 01:02 PM

USB flash drive not recognized

How do I get W10 to see my USB flash drive?

1435 views
May 12, 2020 at 08:28 AM

booster 11 for windows 10

hi,
i downloaded the booster 11 for windows 10.
the booster 11 shows as 32 bit. ideally i need a booster 11 64 bit.
i am using windows 10 on a 64bit system.

do i have to reinstall for booster 11 for 64 bit. if so, can you send me the link as it just auto-downloads the 32bit.

another questions is i have anti-malaware and everytime i shut down the computer and restart the next day, i have to reinstall all over again.
is it because of my anti-virus norton that i use? can you assist me on that as well.
thanks/regards/tony

1434 views
May 23, 2020 at 09:39 AM

Запуск Виндовс

Доброго времени суток. После пользования вашим продуктом у меня стало чтото не то с загрузкой виндовс. Сначала все идет нормально. Загрузка биоса. Потом заставка загрузки виндовс. Потом у меня экран отключается и в таком состоянии минут 15. Экран от ПК не получает никаких сигналов. Как мне это отключить? Что бы была нормальная загрузка рабочего стола после заставки загрузки виндовс? Это началось сразу же после использование Ауслоджик Буст Спида. Откат системы я сделать не могу.

1433 views
May 06, 2020 at 05:50 AM

After Auslogics did some repairs, alot doesnt work

I really cant type out the problems im having all because there are so many... I just got a Performace Scan message from Auglogics as I am typing this message stating "its been 6 days since your last scan" but im afraid to run anything on auglogics. I need a Tech that knows computers very well to remote connect to my laptop and see if they can fix some if not all of these problems that came about. I will list some of the problems I am encountering but first I want to say that everthing did work before. I used to be a windows insider but now my diagnostic data is set to basic and i cant chage it to full.. In yellow, at the top of the windows settings page it now says that I do not have authorization or this setting is being controlled by your organizer. I dont have an Organizer. Ive never seen that Yellow Font orginazation control lock or what ever it is, ever before until about a week ago when i ran the last scan with auglogics. Its not just on that Diagnostic sending part, I find that I get that controlled by my orginazation lock out on all kinds of settings and controls. I work as a heavy equipment machinery driver and work doesnt even have comptures, im not in school or connected to any school account.. I bought my own brand new laptop about 3 months ago, its connected on my home network Optimum Internet and my outlook account isnt attached to anything but my Xbox One X and like i said it was never there before... I cant type in any Windows app or the task bar without having to hit the windows key + R and enter C:\Windows\System32\ctfmon.exe and then it works, but needs to be done everytime i turn my laptop on... I used to always have my Samsung Fit 64 gig tiny flat USB and my SDXC 64 gig 170Mbps read/write card set to enable read and write and catch. Not Readyboost.. but now i cant do that. both USB and SDXC are all over the place.. I have gigabyte speed from optimum and yet my whole computer runs slow... I cant type in the search bar and get my apps show up, or update, or power plan. nothing... AND for some reason, Ive NEVER had 4 accounts. when i turn my laptop on i can only log into my account like normal. but then when you look at the account users, theres administrator, then there is like 3 accounts of my name.. i dont know what to do

1432 views
May 06, 2020 at 04:31 PM

аааа

медленный

1431 views
Jun 28, 2020 at 10:18 AM

Driver Updater

When I launch Driver Updater it seems to hang when connecting to the cloud. Should I reinstall it or is there some other issue?

1431 views
Jan 03, 2021 at 09:19 PM

モニター画面が操作中に何回も、すぐ真っ暗になります。

本日より、スクリーンセーバーのセッティングと違う動きで画面が1分位で真っ暗になります。マウスを動かしたり、エンターキーを押すと元の画面に戻ります。
なにかこのソフトがよかれと思ってそういう動作をしているのかもしれないと思いメールを書きました。
余りに頻繁に画面が暗くなるので、今もzoomで会議をしておりましたが、何回もマウス、エンターキーの操作をしなければならなかったので煩わしく思い、解除できればと思いメールしました。

因みに、電源操作も全て解除し、なしの状態にしております。

以上宜しくお願いします。

佐藤光則  hsny7743@uranus.dti.ne.jp
1430 views
Jun 24, 2021 at 07:08 AM

Не запускается Aslogics BoostSpeed

Добрый день, приобрел годовую подписку на Aslogics BoostSpeed 11. На компьютер и ноутбук установилась нормально и отлично работает (система Windows 10). Но на второй ноутбук установилась с трудом и не запускается, при запуске вылетает окно (принтскрин во вложении). Скачивал с сайта и переустанавливал несколько раз - не помогает, программа не запускается. Система Windows Vista Home, ноутбук ужк возрастной.

1430 views
Nov 19, 2020 at 11:45 AM

Driver Updater

I am unable to install my copy of Driver Updater because McAfee considers it a virus. What should I do?

1429 views
Mar 28, 2020 at 01:49 PM

Avira keeps deleting Boost Speed and all Auslogic *.exe files as a PUA.

Hi there,

I have been on mail with Mr. Alex Bratton of your Support Team. I am a registered purchaser of the Auslogics Boost Speed software, and I have had immense trouble with installing and running it as my Avira antivirus software keeps deleting all Auslogics *.exe files as PUAs having the virus "Auslogics.o" as reported in the Avira quarantine log.

Alex had suggested that I put Auslogics on the Avira scanner EXCEPTIONS list - which I did, but to no avail. Do they have an axe to grind with your software ? I have even sent an e-mail to Avira support telling them hat Auslogics software originates from a Company having its website www.auslogics.com, and to definately check both the antecedents of the Auslogics Company and their software as genuine and not PUA - and thus I requested them to reconsider the action against yyour software exe files. Theu have not yet got back to me regarding this.

I have so far installed and re-installed your Boost Speed software over 5 times since its purchase on 28.08.2019, and each time Avira deletes the *.exe files as well as the entire Auslogics folder in the C:\Program Files (x86) path, every time I shut-down and boot-up my laptop. And all this after making Auslogics an "exception" in the antivirus and real-time protection scanner settings of the Avira software .

Could your team please have a word with the Avira development team to resolve the vixing issue, as I am most certain there will be many othercustomers worldwide using both the Avira and the Aulogics softwares and facing these issues ?

I have actually reached a point of near frustration, as both the Avira and Auslogics softwares do a great job individually, but DO NOT LIKE EACH OTHER (cannot function together) as seen on my laptop !!

Kindly update me on a solution to this problem.

Many thanks,

Savio da Rocha Lobo,

Content hidden to protect privacy

1428 views
Sep 01, 2019 at 05:05 PM

fed up with lack of space on C Drive...what am I doing wrong?

I am trying to do everything right. Vigilance, using auslogics and bitreplica, as well as duplicate file finder, however almost every day, my hardrive fills up, and I can barely get a file to open, due to lack of memory. I have done everything that I know, to try to have all files saved to onedrive, or icloud, but it doesn't seem to make any difference! The computer jams up, because it has reached maximum capacity! Why does this happen, when I am saving files to onedrive (cloud storage). I'm really about ready to chuck this new laptop into the rubbish bin. But.....all available 'new' laptops appear to only have minimal hard drive space. The retailer told me to save my files to the cloud, which is what I am doing, so why does the C drive continually fill up. I move stuff to an external hard drive, in an attempt to free up space, but as soon as bitreplica runs, I'm back to square one. I'm so frustrated, as it takes several minutes just to open a word document. Please please please, can you give me some guidance / direction as to what it is that I am doing wrong. Regards, Kerry

1428 views
Aug 17, 2020 at 09:27 AM

My wireless driver is not working

This is the second time this has happened and it has something to do with this softwarre Auslogics 11 after a deep scan took place. But now I cant restore the driver because it seems to be blocked,
The diagnostic's say "Windows can not bind the IP protocol stack to the network."
This is with my wireless adapter and not with my LAN, But I need my wireless adapter asap. Yes I have tried reinstalling the driver and it says the same thing,

1425 views
Apr 15, 2020 at 03:02 PM

Auslogics Driver Updater 1.23.0.2

Уже не первый раз встроенный антивирус Windows 10 "ругается" на программу, после чего удаляет DriverUpdaterHelper.dll, выдаёт код ошибки 0х0000007Е, и просит переустановить программу. А сейчас при попытке загрузки сетапа с вашего сайте пишет, что она содержит вредоносную программу. Пожалуйста, подскажите, как мне решить данную проблему, чтобы на будущее я с ней не сталкивался? Форма техподдержки непосредственно по вашим программам не работает ни через Мозиллу, ни через Хром, сообщения не отправляются, поэтому пишу здесь. Пожалуйста, сбросьте мой счётчик бесплатных вопросов.
1424 views
Apr 02, 2020 at 01:36 PM

Кэш второго уровня

Здравствуйте, в прошлых версиях была возможность через Tweak Manager включить исплользование кэша втрого уровня. В 11 версии неполучается найти данную функцию. Подскажите как это сделать.

1423 views
Apr 18, 2020 at 10:31 AM

Компьютер тормозит и зависает

В некоторые моменты зависает компьютер, иногда зависает отдельные поля(рабочий стол, панель задач, меню Пуск).
Курсором мыши возможно передвигать, но с различными программами невозможно взаимодействовать, а некоторые попросту не отвечают. Открытие вкладок и поисковые запросы в браузере выполняются очень медленно, а при просмотре видео(на том же Youtube) долго загружается.
Сначало подумал на выход из строя процессора, т.к он не слишком уж новый, да и проблема мне показалась такого рода. Почистил и заменил термопасту процессор, на вид он в хорошем состоянии(без сколов и царапин). После этого пол дня все было нормально но потом все продолжилось.
Дальше я начал искать решение проблемы в интернете, чего я только не перепробывал, и выключение службы Центра обновления Windows, проверки на вирусы и мусорные файлы, чистил реестр, дефрагментировал диски( для этого скачал данную программу). Только после дефрагментации дисков компьютер работал без перебоев и зависаний день, но на следующий все по новой.
Уже незнаю в чем может быть проблема, единственное на что подаю подозрения так это жетский диск, но и то не факт что это верно

1423 views
Oct 27, 2020 at 09:03 AM

Restore

Can I ask you a question of restoring an image?

1423 views
Jul 29, 2020 at 04:16 PM

ウイルスバスタークラウドがアクセス不能になりました

AusulogicsBootspeed pro11を利用して色々スキャンを行っていたところ、表題のウイルスバスタークラウドのアプリが開かなくなりプロパーティを見たところ「同期保留」となっていました。結局本Bootspeedの適用個所をいろいろ外してみてやっとウイルスソフトは復帰した次第です。
このようなことを避けるために今後ウイルスバスターの稼働に影響を与えると思われるBootSpeedの設定項目の詳細について教えて下さい。

1423 views
Nov 24, 2020 at 02:38 AM