1899 questions

After Auslogics did some repairs, alot doesnt work

I really cant type out the problems im having all because there are so many... I just got a Performace Scan message from Auglogics as I am typing this message stating "its been 6 days since your last scan" but im afraid to run anything on auglogics. I need a Tech that knows computers very well to remote connect to my laptop and see if they can fix some if not all of these problems that came about. I will list some of the problems I am encountering but first I want to say that everthing did work before. I used to be a windows insider but now my diagnostic data is set to basic and i cant chage it to full.. In yellow, at the top of the windows settings page it now says that I do not have authorization or this setting is being controlled by your organizer. I dont have an Organizer. Ive never seen that Yellow Font orginazation control lock or what ever it is, ever before until about a week ago when i ran the last scan with auglogics. Its not just on that Diagnostic sending part, I find that I get that controlled by my orginazation lock out on all kinds of settings and controls. I work as a heavy equipment machinery driver and work doesnt even have comptures, im not in school or connected to any school account.. I bought my own brand new laptop about 3 months ago, its connected on my home network Optimum Internet and my outlook account isnt attached to anything but my Xbox One X and like i said it was never there before... I cant type in any Windows app or the task bar without having to hit the windows key + R and enter C:\Windows\System32\ctfmon.exe and then it works, but needs to be done everytime i turn my laptop on... I used to always have my Samsung Fit 64 gig tiny flat USB and my SDXC 64 gig 170Mbps read/write card set to enable read and write and catch. Not Readyboost.. but now i cant do that. both USB and SDXC are all over the place.. I have gigabyte speed from optimum and yet my whole computer runs slow... I cant type in the search bar and get my apps show up, or update, or power plan. nothing... AND for some reason, Ive NEVER had 4 accounts. when i turn my laptop on i can only log into my account like normal. but then when you look at the account users, theres administrator, then there is like 3 accounts of my name.. i dont know what to do

1550 views
May 06, 2020 at 04:31 PM

defrag ssd

you product wants to defrag and tweak my ssd is this safe?

1303 views
May 06, 2020 at 09:29 AM

Запуск Виндовс

Доброго времени суток. После пользования вашим продуктом у меня стало чтото не то с загрузкой виндовс. Сначала все идет нормально. Загрузка биоса. Потом заставка загрузки виндовс. Потом у меня экран отключается и в таком состоянии минут 15. Экран от ПК не получает никаких сигналов. Как мне это отключить? Что бы была нормальная загрузка рабочего стола после заставки загрузки виндовс? Это началось сразу же после использование Ауслоджик Буст Спида. Откат системы я сделать не могу.

1519 views
May 06, 2020 at 05:50 AM

Démarrage anormal

Bonjour,
J'utilise une unité ASUS N73SV sous Windows10 qui me donne entière satisfaction.
Logiciel de sécurité Kaspersky, Firewall Windows, Analyses périodiques par Auslogics Anti-Malware.
Aucune attaque virale jusqu'à aujourd'hui.
Depuis un an environ la touche habituelle de demarrage - au dessus du clavier à droite - ne fonctionne plus; le pc ne demarre pas.
Pour demarrer le pc, il faut appuyer sur la touchei se trouve tout au dessus du clavier à gauche, donc la symetrique de l'autre.
Mais au lieu d'activer directement Windows, cela active le Bios (son de boot tres fort) puis Windows (son de boot normal).
J'ai entrepris plusieurs fois de comprendre et réparer mais sans succès.
Je souhaite revenir à un fonctionnement normal.
Merci de votre aide.
Kind regards,
Jean Farny
1264 views
May 03, 2020 at 04:35 PM

Auslogics registry cleaner

Can certain categories be excluded when using registry cleaner?
REASON: after using registry cleaner I get an error message when I open MSMoney. I can correct this using Money setup, but registry cleaner does something to reverse my setup correction.

System: Windows 7 Home Premium

1471 views
Apr 29, 2020 at 10:41 PM

Отвалился BlueTooth

Добрый день
на обоих моих ноутбука пропал блутус. Возможно что то позволил исправить программе не проконтролировав. Как включить блютус снова? В скрытых девайсай его вижу. Система предлагаетпереустановить драйвер, но дело явно не в этом.

1540 views
Apr 29, 2020 at 06:00 AM

Здравствуйте, программа Auslogics не запускается вместе с включением компьютера, как исправить?

Здравствуйте, программа Auslogics не запускается вместе с включением компьютера, как исправить?

1368 views
Apr 29, 2020 at 01:50 AM

Disco duro se encuentra al 100%

Hola, ultimamente he notado que mi disco duro se encuentra al 100% y las aplicaciones se abren lento, cuando tenia windows 7 no me pasaba esto supongo que es por el sistema operativo tengo windows 10 pro, ¿habra una solucion para bajar el uso del disco ?

1350 views
Apr 28, 2020 at 02:59 AM

POST interruption

What could be the problem when most of the time during Boot on Message "Warning System Boot fail or post interruption".

Press continue or press del to load bios setup.

1292 views
Apr 27, 2020 at 08:51 AM

Why auslogics boostspeed can't solve this ?

Hello. I'm a regular gamer, but when I play a game, no matter which one, my computer always crashes. Everyday, for months. I have used boostspeed 11 many times to fix this, but despite what Auslogics promised, my computer is no more stable than before. Nothing has changed. So I’m wondering what it pays to pay for software that promises to take care of our computer’s system, if it’s just basic operations that don’t solve anything. If nothing changes, I will not renew my subscription. If you need information about my hardware, don't hesitate to ask me. Thank you. Sincerely, Arnaud

1371 views
Apr 27, 2020 at 08:32 AM

Malware

How can I minimize the picking up of malware by using your toolkit?

1821 views
Apr 25, 2020 at 10:50 PM

Temperature

I am using Windows 8.1. Is there a provision in BoostSpeed 11, for setting the Disk/Processor Temperature at which the PC will switch off?

1500 views
Apr 22, 2020 at 04:00 PM

ms-resource: ProductName を取り除きたい

Windows10 バージョン 2004 (OSビルド 19041.207)
スタートメニューのその他グループに

"ms-resource: ProductName"  を取り除きたい


このアプリは開かず、アンインストールもできない

2981 views
Apr 22, 2020 at 01:56 PM

sudden shutdown

why is my pc suddenly shuts down without warning every 10 to 20 minutes

1419 views
Apr 20, 2020 at 08:19 AM

OpenAL32.dll.

Пожалуйста посоветуйте файл OpenAL32.dll. последствия

1751 views
Apr 19, 2020 at 06:26 AM

Windows 10 logon password via Auslogics

Hello!
I am not new to Aulogics - great product! However, I am a new Aulogics 11 user. In Aulogics, in trying to bypass Windows 10 Logon on my Lenovo, I believe the password that was pre-autofilled may have been incorrect? I chose by-pass Windows logon, however when my laptop restarts the first User screen tells me my Password is incorrect. How do I fix this in Aulogics? Any help would be appreciated! ~Catherine Trager

Content hidden to protect privacy

1594 views
Apr 18, 2020 at 05:41 PM

Повышенное потребление ресурсов

Периодически всплывает уведомление о повышенном потреблении ресурсов. По клику открывается Task Manager, из информации в котором я понимаю только, что процессор загружен на 100%, оперативная память тоже. Я и сам замечаю, что компьютер часто тормозит и процессор нагревается до 50 градусов.
Компьютер новый (моноблок Lenovo, W10), программ в автозагрузке не более десяти. Прежний моноблок, которому более пяти лет с W 8.1, на котором установлено гораздо больше программ, ведёт себя гораздо резвее.
И что со всем этим делать? В Task Manager не вижу каких-либо инструментов. Уж не сама ли ваша программа Auslogics Boost Speed 11 тормозит систему?

1080 views
Apr 18, 2020 at 05:17 PM

Кэш второго уровня

Здравствуйте, в прошлых версиях была возможность через Tweak Manager включить исплользование кэша втрого уровня. В 11 версии неполучается найти данную функцию. Подскажите как это сделать.

1513 views
Apr 18, 2020 at 10:31 AM

System Restore

Desktop just started on off when sitting in sleep mode, A tried to update Microsoft Windows 10, took update, Still on off multi. times daily B, tried System restore tells me could not preform System Restore Still on ,off mode , C What setting in resuce center would fix this System Restore problem.s all from same date around System 3 or 4 from same date close to restore point date. Is Boostspeed 11 causing this problem

1496 views
Apr 16, 2020 at 06:59 PM

help needed

Hi, I don't think it's about you, but if you can help me I'll be very grateful.
i have two devices
1.micro sd 16GB apacer
2.flash memory 16GB apacer
these two device now is WRITE PROTECTED and i have download every tools and tricks exist in world for flash these but no one responding.
now pls pls pls pls pls pls help me in my country there is no official represent from apacer or others pls help me tnx a lot and i very respect u and ur works and apps

respectful.TOOFAN

1471 views
Apr 16, 2020 at 08:42 AM

Managing more than 1 PC with Bootspeed 13

Hi
Can I use the same licence to upgrade other PCs to BootSpeed 13 Pro?
What is required for our second PC to be upgraded to Pro?
Thanks
Russ
568 views
Jul 13, 2023 at 02:09 AM

Windows Update

Error message: "Your device is missing important security and quality fixes.", tried several fixes...no result.
568 views
Sep 09, 2023 at 02:19 AM

ARQUIVOS CONTAMINADOS POR TROJANS

Como o auslogics bootspeed informa que tudo no meu computador esta correto se meu antivirus informa que ele esta contaminado por Trojans, pop up etc...
O sistema foi atualizado compulsoriamente pela Microsoft para o win 11.
567 views
Sep 21, 2023 at 09:56 PM

Privacy Leaks

How do I correct Windows privacy leaks?
566 views
Sep 27, 2023 at 05:26 PM

стабильная и быстрая работа ПК

Здравствуйте! Мой ноутбук для домашнего использования, сложность с тем что он очень долго загрудается и все остальные процессы идут с зависанием и долгой загрузкой, скачала вашу программу, как могла сама что то удаляла с компьютера, но знаний у меня в этой области нет, как мне оптимизировать его содержимое для стабильной работы и чтобы сканирование на мусор проходило автоматически.
Спасибо
566 views
Nov 09, 2023 at 06:24 PM

file explorer

since my updates yesterday file explorer has stopped working
I tried to reset using a previous reset point but that did not work
565 views
Jan 26, 2023 at 02:58 PM

IIS

How do I configure IIS to work on ASUS Vivobook
564 views
Mar 24, 2024 at 10:06 PM

Looking For a Software Replacement

I am looking for software that will replace at least all of the features of McAfe Life Sale and some. Do you have a software program(s) that will do this and if so what are they and how much do they cost?
564 views
Aug 10, 2023 at 03:51 PM

Recording locks up.

Sometimes a pop-up behind a screen that I am unaware of, like BoostSpeed, will render an application or camera immobile. How do I keep pop ups from happening? What can I do?
563 views
Nov 01, 2023 at 07:49 PM

Is it safe to delete this keys

Hi,

I tried to uninstall a software, but that doesn't seem to have gone well.
It is 4k video downloader.

Reinstalling doesn't work because I get the message that it is still there on my PC.

Now I have downloaded your software and when I search for keys of this 4k software, I get a list of almost 500 keys, see photo.

When I check, when I stand on it with the cursor, it all shows 4k.

Now my question is, is this safe to remove?

Thanks in advance for your cooperation.

Yours sincerely

John de Vries

Content hidden to protect privacy

563 views
Nov 17, 2023 at 11:15 AM

Quicken Lock

Occassionally, Quicken crashes. When it does, I must either force quit BoostSpeed or Restart my computer. This is because BoostSpeed locks the Quicken data file. I would like to exclude this file (or the containing folder) from any scanning or "interference" from BoostSpeed - can I do this? Is there any way to prevent BoostSpeed from tormenting my Quicken Files?
563 views
Aug 27, 2023 at 11:10 PM

register drag ssd use

i have ssd, if i do registery defrag, will it slow down?
563 views
Dec 30, 2022 at 06:56 PM

ПРОГРАММЫ

ГДЕ ЛУЧШИИ САЙТЫ ДЛЯ СКАЧИВАНИЯ ПРОГРАММ ДЛЯ НОУТА
562 views
Aug 29, 2023 at 01:52 PM

ドライバーアップデーター

ドライバーアップデーターがファイイヤーウオールの設定を確認してくださいと表示されます
562 views
Sep 10, 2023 at 12:11 AM

stringa di ricerca

Buongiorno, ho eseguito una ricerca per stirnga e non ho ottenuto risultati, ho eseguito la stessa ricerca con regedit e sono uscite diverse voci di registro, come mai?
Cosa devo fare per ottenere questi risultati con la vostra app e per cancellarli senza cercarli e selezionarli uno ad uno con regedit?
Grazie.
561 views
Sep 22, 2023 at 07:43 AM

Notification about cleaning browser cache

Hi,

I get notifications that I need to clear my browser cache.
What is the best action to do so in Boostspeed 13?

560 views
Apr 21, 2023 at 01:46 PM

heute kein Zugang zum Abruf der Treiber-Daten

Gibt es ein technisches Problem beim Zugang zum Datenserver?
560 views
Sep 07, 2023 at 02:18 PM

upgraging lost my registered status

Hi,
I upgraded my computer with a different motherboard, a new i7 cpu and new ddr4 memory, but my hard drives, my graphics card and sound card plus power supply are still the same. When I turned on my computer I see that my status went from registered to unregistered. How do I get it to be registered again. It's not a different computer, just upgraded.

Thanks,
Chris K.
559 views
Oct 20, 2023 at 11:49 PM

MSEdge

Yesterday I ran Auslogics BoostSpeed 13 and it messed up my ability to get into MSEdge. It wasnt until late last night that I figured out what happened but I don't know how to fix it. After running the scan and after clicking on the repair/fix it button, a small screen pops us and asks me to close the following files. They are all msedge.exe (6 or more), but it didn't do that this time and has stopped me from being able to get in MicroSoft Edge. Has my copy of Auslogics BoostSpeed 13 been compromised, have I missed and update or is something else going on? Can you help e with this?
559 views
Dec 05, 2023 at 11:45 PM

Privacy Monitoring

Does Auslogics have a feature to stop data broker sites from obtaining personal info?
559 views
Apr 01, 2023 at 07:56 PM