1897 questions
reparer windows 10
MON WINDOWS 10 NE FONCTIONNE PAS BIEN PAR DE BARRE DES TACHES NI L EXPLORATEUR DE WINDOWS
mot de passe bios perdu
j'ai un pc hp compaq 6730s sous N°=CNU9020NKN
mon mot de passe par defaut (e9lo1719s9) n'a pas d'effet
j'ai change la pile bios rien
j'ai utilise hiren's bootcd rien
Aider mois s.v.p et merci d'avance................
How do I stop starting up when I start the computer
When I start up my computer, PCTuneUp starts up. How do I prevent this from happening.
Problema con Auslogics Driver Updater
Buenos dias, tengo un problema con la aplicacion Auslogics Driver Update, ya solicite anteriormente me solucionen este problema, inclusive me solicitaron que reinstale el aplicativo, pero no se soluiciona este proble, por favor tengo que actualizar algunos drivers, pero se queda la PC congelada cuando va hacr la actualizacion de dichos driver, para constancia les envio fotos del problema.
once power button pressed to start up...
...my PC makes three long, low tones followed by four shorter, higher tones. Plus it is very slow to start.
Any help gratefully received
Thank you
Tom
Any help gratefully received
Thank you
Tom
TaskManager.exe
I received a high-use resource message that one program was using a significant amount of memory resources, and it was identified as TaskManager.exe. Should I and is there a way to shut this down?
Interfearing with VPN
Hi,
Whenever my VPN connects to the internet, the Auslogics Bootspeed notifies, an attempt to change the DNS was diplayed. Well if I connect via VPN it will change the DNS. My question is does your softwere blocks the attempted change of DNS or it's only a notification. If it blocks then how do I dissable it as I want my VPN more than your software.
Thank you,
Winston
Whenever my VPN connects to the internet, the Auslogics Bootspeed notifies, an attempt to change the DNS was diplayed. Well if I connect via VPN it will change the DNS. My question is does your softwere blocks the attempted change of DNS or it's only a notification. If it blocks then how do I dissable it as I want my VPN more than your software.
Thank you,
Winston
I have windows installed on my SSD and HDD so how do I transfer data from one installation to the other without cloning
So I got and installation of windows on my SSD and HDD, but now I want to shift my files from HDD to SSD installation and then delete windows from HDD, but I don't want to clone(unless it doesn't clone windows installation and other files that I already installed on the SSD) my current installation(HDD) as it was pirated while the other one is legal, and by data I mean everything from text files to programs I installed, so I just want the user data and programs I installed to be shifted to my SSD without deleting windows from SSD and cloning the HDD one. Pls Help as quickly as possible,
Windows Defender Disable Remove
I WOULD YOUR HELP REGARDING REMOVE WINDOWS DEFENDER BECAUSE MY LAPTOP GOES VERY SLOW WHEN IS ON
THANK YOU
SAKLIS DIMITRIS
THANK YOU
SAKLIS DIMITRIS
Boot Speed, or Restart Speed
The main reason I bought this program was to help increase my boot speed. it's 4 minutes and 15 seconds. After running the Pro version of the program the boot speed is still the same. I deselected a bunch of items in the startup screen and it's still the same. I don't understand why it takes so long. Please help.I'm not sure if this is a windows question or a software question. thanks. Paul
Disk Defrag pro not showing new drive
I have just installed a new external hard drive (G) and the drive is not displayed in the list of disks in Auslogics Disk defrag 10. Could you please advise me how to correct the issue.
Sorry but I did not know which sub category was appropriate
AusLogic # BoostSpeed users
Where does display state the maximum number of user available with the product key assigned; and where does it show how many have been assigned; and where do they give the user name of the assigned
Start up file deleted
How can I restore my file after auslogic Boostspeed deleted the program file? Meantime, i cant open a program.
wrong core amount
Hi,
Your program ver 13 reports that my I7 13700k have 12 cores but its supposed to be 16 with 24 treads. Why is that ?
Your program ver 13 reports that my I7 13700k have 12 cores but its supposed to be 16 with 24 treads. Why is that ?
Программа была заблокирована администратором
Вероятно возникла проблема с цифровой подписью файла integrator.exe. Программа не может быть активирована лицензионным ключом.
Sound interface stopped working on Windows 11
My good old Line 6 Toneport KB37, midi controller, and external soundcard combo stopped working on my new PC.
When running on an Asus TUF H310M with a Core i5 9400F and 16GB of RAM, it was working just fine.
Now, on the new setup, a Gigabyte Aorus Elite B760M with a Core i5 13th gen and 32GB of DDR5 RAM, the installation and driver setup ran okay. However, when playing any kind of music or sound file in any player, including YouTube, streaming services, you name it, it doesn't work. The sound feels 'cropped'; it plays extremely slow and low pitched, clearly malfunctioning.
Cubase 12 doesn't even recognize the device or the ASIO drivers for configuration.
I've been using the Toneport KB37 for music production and as a general soundcard for years, and on the old PC, it still works perfectly.
The same USB cable is being used on both PCs.
Am I missing any kind of configuration, new driver, or something that could make it work with Windows 11?
Thanks in advance for your time and help. Any kind of tip or suggestion will be extremely appreciated.
When running on an Asus TUF H310M with a Core i5 9400F and 16GB of RAM, it was working just fine.
Now, on the new setup, a Gigabyte Aorus Elite B760M with a Core i5 13th gen and 32GB of DDR5 RAM, the installation and driver setup ran okay. However, when playing any kind of music or sound file in any player, including YouTube, streaming services, you name it, it doesn't work. The sound feels 'cropped'; it plays extremely slow and low pitched, clearly malfunctioning.
Cubase 12 doesn't even recognize the device or the ASIO drivers for configuration.
I've been using the Toneport KB37 for music production and as a general soundcard for years, and on the old PC, it still works perfectly.
The same USB cable is being used on both PCs.
Am I missing any kind of configuration, new driver, or something that could make it work with Windows 11?
Thanks in advance for your time and help. Any kind of tip or suggestion will be extremely appreciated.
Jabra Speak 710
I have a Jabra Speak 710, connected through a Jabra Link 380 bluetooth device.
My computer (Thinkpad, with Windows 10 Pro Version 22H2) does not recognize the speaker as a sound device.
When connected to the computer through the USB cable, the speaker is visible in the catagory Other Devices iso Audio Devices.
The speaker and the link are working fine on another computer of mine, and also on my smartphone.
I reached out to Jabra support, they have helped me resetting the firmware, removing and reconnecting the device etc. but nothing works. I even got a new speaker from them, but still no change.
The problem started after installing an update of a driver. Undoing the update did not help.
I have even done a full re-installation of Windows, which has removed all customized settings, but problem still persists.
When starting up the computer, there is a very brief connect with the speaker (the speaker says : "PC connected"), but immediately followed by a disconnect (the speaker says : "PC disconnected")
I think there is an entry in the registry that prevents connecting with the speaker, but I am not able to identify it.
My computer (Thinkpad, with Windows 10 Pro Version 22H2) does not recognize the speaker as a sound device.
When connected to the computer through the USB cable, the speaker is visible in the catagory Other Devices iso Audio Devices.
The speaker and the link are working fine on another computer of mine, and also on my smartphone.
I reached out to Jabra support, they have helped me resetting the firmware, removing and reconnecting the device etc. but nothing works. I even got a new speaker from them, but still no change.
The problem started after installing an update of a driver. Undoing the update did not help.
I have even done a full re-installation of Windows, which has removed all customized settings, but problem still persists.
When starting up the computer, there is a very brief connect with the speaker (the speaker says : "PC connected"), but immediately followed by a disconnect (the speaker says : "PC disconnected")
I think there is an entry in the registry that prevents connecting with the speaker, but I am not able to identify it.
Server use
Is Auslogics Registry Cleaner suitable for servers?
It seems to run perfectly according our testings on our spare server, but can it be considered as a suitable program?
We have searched internet and we did not find any registry cleaner, especially designed for servers.
Best Regards
Angelos Diakoumakos
It seems to run perfectly according our testings on our spare server, but can it be considered as a suitable program?
We have searched internet and we did not find any registry cleaner, especially designed for servers.
Best Regards
Angelos Diakoumakos
Maintaining Boostspeed
The latest version appears to be 13.0.0.6. Do you intend to maintain this product? as rapidly as things are changing it appears this product is not going to keep up.
проблема со входом в браузеры
Здраствуйте мне очень нужна Ваша помощь, у меня не отрывает страницы ни один браузер .Интернет есть , есть гугл , есть опера . но не открывает . не работают ссылки . Иными словами даже не появляются окна после нажатия ярлыка картинки на которые клацаещь а толку нет. Интернет есть показывает статус что все работает , ошибок не находит программа сканирования ... Помогите пожалуста
レスポンスが遅くなった
動作がいちいち遅くなって困っています。何を調べればよろしいのか教えてください。
具体的に思いつくことを列記すれば・・・
㈠インテルのソフトの自動バックアップがタイムアウトしたとのコメントが出て成功しません。
㈡Naxosのデータベースから音楽曲を屢々ダウンロードするのですが、ダウンロードした曲の音質が劣化したように感じます。レスポンスの遅さが禍しているのではないでしょうか？
㈢その他各種アプリがことごとく開くのが遅くて苛立ちます。以上
具体的に思いつくことを列記すれば・・・
㈠インテルのソフトの自動バックアップがタイムアウトしたとのコメントが出て成功しません。
㈡Naxosのデータベースから音楽曲を屢々ダウンロードするのですが、ダウンロードした曲の音質が劣化したように感じます。レスポンスの遅さが禍しているのではないでしょうか？
㈢その他各種アプリがことごとく開くのが遅くて苛立ちます。以上
Display and touchpad
i cannot go to night light and lower the blue light and my touchpad stopped fiunctioning ,
license keys
If I were to buy the 3-pack of license keys, would I be able to use them over the course of three years? It says "1 year, 3 keys", but I don't know if they each expire a year after purchase or if they expire a year after they are used. For example, if I bought the keys, would I be able to use one key every year, using the three keys over the course of three years, or would I have to buy another 3-pack every year?
Your software seems to have stopped my search from working
Hi, I ran you softwarre to clean up my computer using the default settings. Shortly after I noticed my search was not working. I checked Search in the WIndows setting and found it was indexing my computer. It is partially indexed but appears to be stopping and starting. I cannot search with Windows Explorer or inside Outlook. Both give a result of nothing found. I found one of your actions was related to indexing and I restored this. However it is still the same. How do I fix this?
Thanks
Allan
Thanks
Allan
MAPPING USB PORTS TO COM PORTS
Im having trouble with not enough COM Ports for external, USB devices.
With only 1 Si Labs Enhanced and Standard port, and 1 port for the system, as seen in Device Manage, how can I run, for example, more than one sftwr program - intended for a Ham radio transceiver - plus an external, USB microphone plus other external HDD, with or without an external USB Hub?
Why does my HP All-in-one, WIN11 system, work with the internal camera but NOT the internal microphone?
Do I need "virtual ports"? Do I need special drivers and/or hardware?
Thanks.
Phil
With only 1 Si Labs Enhanced and Standard port, and 1 port for the system, as seen in Device Manage, how can I run, for example, more than one sftwr program - intended for a Ham radio transceiver - plus an external, USB microphone plus other external HDD, with or without an external USB Hub?
Why does my HP All-in-one, WIN11 system, work with the internal camera but NOT the internal microphone?
Do I need "virtual ports"? Do I need special drivers and/or hardware?
Thanks.
Phil
Auslogics BoostSpeed が上手く使えません
マイクロソフトのエッジが邪魔をして、「稼働中のプログラムを全てを終了する」という機能が、突然使えなくなって、これを「手動で終了させよ」との文字が出ますが、出来ません。方法をご教示ください。また、何故、今までスムーズに出来ていたのに、何か私が間違えた設定をしてしまったのでしょうか？
New in blog
See allRecommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7