After Auslogics did some repairs, alot doesnt work
I really cant type out the problems im having all because there are so many... I just got a Performace Scan message from Auglogics as I am typing this message stating "its been 6 days since your last scan" but im afraid to run anything on auglogics. I need a Tech that knows computers very well to remote connect to my laptop and see if they can fix some if not all of these problems that came about. I will list some of the problems I am encountering but first I want to say that everthing did work before. I used to be a windows insider but now my diagnostic data is set to basic and i cant chage it to full.. In yellow, at the top of the windows settings page it now says that I do not have authorization or this setting is being controlled by your organizer. I dont have an Organizer. Ive never seen that Yellow Font orginazation control lock or what ever it is, ever before until about a week ago when i ran the last scan with auglogics. Its not just on that Diagnostic sending part, I find that I get that controlled by my orginazation lock out on all kinds of settings and controls. I work as a heavy equipment machinery driver and work doesnt even have comptures, im not in school or connected to any school account.. I bought my own brand new laptop about 3 months ago, its connected on my home network Optimum Internet and my outlook account isnt attached to anything but my Xbox One X and like i said it was never there before... I cant type in any Windows app or the task bar without having to hit the windows key + R and enter C:\Windows\System32\ctfmon.exe and then it works, but needs to be done everytime i turn my laptop on... I used to always have my Samsung Fit 64 gig tiny flat USB and my SDXC 64 gig 170Mbps read/write card set to enable read and write and catch. Not Readyboost.. but now i cant do that. both USB and SDXC are all over the place.. I have gigabyte speed from optimum and yet my whole computer runs slow... I cant type in the search bar and get my apps show up, or update, or power plan. nothing... AND for some reason, Ive NEVER had 4 accounts. when i turn my laptop on i can only log into my account like normal. but then when you look at the account users, theres administrator, then there is like 3 accounts of my name.. i dont know what to do
Запуск Виндовс
Доброго времени суток. После пользования вашим продуктом у меня стало чтото не то с загрузкой виндовс. Сначала все идет нормально. Загрузка биоса. Потом заставка загрузки виндовс. Потом у меня экран отключается и в таком состоянии минут 15. Экран от ПК не получает никаких сигналов. Как мне это отключить? Что бы была нормальная загрузка рабочего стола после заставки загрузки виндовс? Это началось сразу же после использование Ауслоджик Буст Спида. Откат системы я сделать не могу.
Démarrage anormal
J'utilise une unité ASUS N73SV sous Windows10 qui me donne entière satisfaction.
Logiciel de sécurité Kaspersky, Firewall Windows, Analyses périodiques par Auslogics Anti-Malware.
Aucune attaque virale jusqu'à aujourd'hui.
Depuis un an environ la touche habituelle de demarrage - au dessus du clavier à droite - ne fonctionne plus; le pc ne demarre pas.
Pour demarrer le pc, il faut appuyer sur la touchei se trouve tout au dessus du clavier à gauche, donc la symetrique de l'autre.
Mais au lieu d'activer directement Windows, cela active le Bios (son de boot tres fort) puis Windows (son de boot normal).
J'ai entrepris plusieurs fois de comprendre et réparer mais sans succès.
Je souhaite revenir à un fonctionnement normal.
Merci de votre aide.
Kind regards,
Jean Farny
Auslogics registry cleaner
Can certain categories be excluded when using registry cleaner?
REASON: after using registry cleaner I get an error message when I open MSMoney. I can correct this using Money setup, but registry cleaner does something to reverse my setup correction.
System: Windows 7 Home Premium
Отвалился BlueTooth
Добрый день
на обоих моих ноутбука пропал блутус. Возможно что то позволил исправить программе не проконтролировав. Как включить блютус снова? В скрытых девайсай его вижу. Система предлагаетпереустановить драйвер, но дело явно не в этом.
Здравствуйте, программа Auslogics не запускается вместе с включением компьютера, как исправить?
Здравствуйте, программа Auslogics не запускается вместе с включением компьютера, как исправить?
Disco duro se encuentra al 100%
Hola, ultimamente he notado que mi disco duro se encuentra al 100% y las aplicaciones se abren lento, cuando tenia windows 7 no me pasaba esto supongo que es por el sistema operativo tengo windows 10 pro, ¿habra una solucion para bajar el uso del disco ?
POST interruption
What could be the problem when most of the time during Boot on Message "Warning System Boot fail or post interruption".
Press continue or press del to load bios setup.
Why auslogics boostspeed can't solve this ?
Hello. I'm a regular gamer, but when I play a game, no matter which one, my computer always crashes. Everyday, for months. I have used boostspeed 11 many times to fix this, but despite what Auslogics promised, my computer is no more stable than before. Nothing has changed. So I’m wondering what it pays to pay for software that promises to take care of our computer’s system, if it’s just basic operations that don’t solve anything. If nothing changes, I will not renew my subscription. If you need information about my hardware, don't hesitate to ask me. Thank you. Sincerely, Arnaud
Temperature
I am using Windows 8.1. Is there a provision in BoostSpeed 11, for setting the Disk/Processor Temperature at which the PC will switch off?
ms-resource: ProductName を取り除きたい
Windows10 バージョン 2004 (OSビルド 19041.207)
スタートメニューのその他グループに
"ms-resource: ProductName" を取り除きたい
このアプリは開かず、アンインストールもできない
Windows 10 logon password via Auslogics
Hello!
I am not new to Aulogics - great product! However, I am a new Aulogics 11 user. In Aulogics, in trying to bypass Windows 10 Logon on my Lenovo, I believe the password that was pre-autofilled may have been incorrect? I chose by-pass Windows logon, however when my laptop restarts the first User screen tells me my Password is incorrect. How do I fix this in Aulogics? Any help would be appreciated! ~Catherine Trager
Повышенное потребление ресурсов
Периодически всплывает уведомление о повышенном потреблении ресурсов. По клику открывается Task Manager, из информации в котором я понимаю только, что процессор загружен на 100%, оперативная память тоже. Я и сам замечаю, что компьютер часто тормозит и процессор нагревается до 50 градусов.
Компьютер новый (моноблок Lenovo, W10), программ в автозагрузке не более десяти. Прежний моноблок, которому более пяти лет с W 8.1, на котором установлено гораздо больше программ, ведёт себя гораздо резвее.
И что со всем этим делать? В Task Manager не вижу каких-либо инструментов. Уж не сама ли ваша программа Auslogics Boost Speed 11 тормозит систему?
Кэш второго уровня
Здравствуйте, в прошлых версиях была возможность через Tweak Manager включить исплользование кэша втрого уровня. В 11 версии неполучается найти данную функцию. Подскажите как это сделать.
System Restore
Desktop just started on off when sitting in sleep mode, A tried to update Microsoft Windows 10, took update, Still on off multi. times daily B, tried System restore tells me could not preform System Restore Still on ,off mode , C What setting in resuce center would fix this System Restore problem.s all from same date around System 3 or 4 from same date close to restore point date. Is Boostspeed 11 causing this problem
help needed
Hi, I don't think it's about you, but if you can help me I'll be very grateful.
i have two devices
1.micro sd 16GB apacer
2.flash memory 16GB apacer
these two device now is WRITE PROTECTED and i have download every tools and tricks exist in world for flash these but no one responding.
now pls pls pls pls pls pls help me in my country there is no official represent from apacer or others pls help me tnx a lot and i very respect u and ur works and apps
respectful.TOOFAN
wrong core amount
Your program ver 13 reports that my I7 13700k have 12 cores but its supposed to be 16 with 24 treads. Why is that ?
Программа была заблокирована администратором
Sound interface stopped working on Windows 11
When running on an Asus TUF H310M with a Core i5 9400F and 16GB of RAM, it was working just fine.
Now, on the new setup, a Gigabyte Aorus Elite B760M with a Core i5 13th gen and 32GB of DDR5 RAM, the installation and driver setup ran okay. However, when playing any kind of music or sound file in any player, including YouTube, streaming services, you name it, it doesn't work. The sound feels 'cropped'; it plays extremely slow and low pitched, clearly malfunctioning.
Cubase 12 doesn't even recognize the device or the ASIO drivers for configuration.
I've been using the Toneport KB37 for music production and as a general soundcard for years, and on the old PC, it still works perfectly.
The same USB cable is being used on both PCs.
Am I missing any kind of configuration, new driver, or something that could make it work with Windows 11?
Thanks in advance for your time and help. Any kind of tip or suggestion will be extremely appreciated.
Jabra Speak 710
My computer (Thinkpad, with Windows 10 Pro Version 22H2) does not recognize the speaker as a sound device.
When connected to the computer through the USB cable, the speaker is visible in the catagory Other Devices iso Audio Devices.
The speaker and the link are working fine on another computer of mine, and also on my smartphone.
I reached out to Jabra support, they have helped me resetting the firmware, removing and reconnecting the device etc. but nothing works. I even got a new speaker from them, but still no change.
The problem started after installing an update of a driver. Undoing the update did not help.
I have even done a full re-installation of Windows, which has removed all customized settings, but problem still persists.
When starting up the computer, there is a very brief connect with the speaker (the speaker says : "PC connected"), but immediately followed by a disconnect (the speaker says : "PC disconnected")
I think there is an entry in the registry that prevents connecting with the speaker, but I am not able to identify it.
Server use
It seems to run perfectly according our testings on our spare server, but can it be considered as a suitable program?
We have searched internet and we did not find any registry cleaner, especially designed for servers.
Best Regards
Angelos Diakoumakos
Maintaining Boostspeed
проблема со входом в браузеры
レスポンスが遅くなった
具体的に思いつくことを列記すれば・・・
㈠インテルのソフトの自動バックアップがタイムアウトしたとのコメントが出て成功しません。
㈡Naxosのデータベースから音楽曲を屢々ダウンロードするのですが、ダウンロードした曲の音質が劣化したように感じます。レスポンスの遅さが禍しているのではないでしょうか？
㈢その他各種アプリがことごとく開くのが遅くて苛立ちます。以上
Display and touchpad
Your software seems to have stopped my search from working
Thanks
Allan
license keys
MAPPING USB PORTS TO COM PORTS
With only 1 Si Labs Enhanced and Standard port, and 1 port for the system, as seen in Device Manage, how can I run, for example, more than one sftwr program - intended for a Ham radio transceiver - plus an external, USB microphone plus other external HDD, with or without an external USB Hub?
Why does my HP All-in-one, WIN11 system, work with the internal camera but NOT the internal microphone?
Do I need "virtual ports"? Do I need special drivers and/or hardware?
Thanks.
Phil
Microsoft Edge and...
New in blog
See allRecommended
DOWNLOAD NOW
Download size: 12,8 Mb