1899 questions
Напортачил...
Я перенёс папку "Загрузки" из положения по умолчанию на диск D, но не создал отдельной папки, и теперь "Загрузки" - это весь диск D. Получается бардак.
При попытке вернуть всё по умолчанию или перенести в другое место, пишет: "Не удалось сформировать список обычных подкаталогов в "D:\System Volume Information".
Отказано в доступе.
Как вернуть положение по умолчанию???
При попытке вернуть всё по умолчанию или перенести в другое место, пишет: "Не удалось сформировать список обычных подкаталогов в "D:\System Volume Information".
Отказано в доступе.
Как вернуть положение по умолчанию???
Нужен ли антивирус если есть Bootspeed ??
Нужен ли антивирус если есть Bootspeed ?? Ваша программа спровляеться с вирусами и майнингами??
Logitech C920s
I have a Logitech C920s webcam. Everything was working perfectly fine until Wednesday evening. At that time I started doing a bunch of maintenance within BoostSpeed. Something in my system was changed, and now I get a BSOD whenever I boot my computer when the webcam is plugged in. If I remove the webcam from the USB port, then the computer boots fine.
I've run two different anti-virus programs (including your Anti-Malware) and I also have your driver updater. Plus I made sure that I have the latest version of Logitech's LogiCapture software. And it does not appear that there were any Windows updates (other than Defender) since last week.
So...at this point I cannot use my webcam and I'm fairly certain it was due to some change made within BoostSpeed.
Please help me fix this. Is there an audit log in BoostSpeed that shows what settings were changed?
I've run two different anti-virus programs (including your Anti-Malware) and I also have your driver updater. Plus I made sure that I have the latest version of Logitech's LogiCapture software. And it does not appear that there were any Windows updates (other than Defender) since last week.
So...at this point I cannot use my webcam and I'm fairly certain it was due to some change made within BoostSpeed.
Please help me fix this. Is there an audit log in BoostSpeed that shows what settings were changed?
WIndows Security closes when opened
Hi I'm Raffy and a New member of the Auslogics
When I open Windows Security Application it closes immediately
how do I fix it
PROVING
How to prove my performance specifically that mu processor is from type U
my device is : core i 7 8th gen
ram 8 GB
hard HDD 1TB
hard SSD 500 GB
NIVIDEA GEFORCE MX130
my device is : core i 7 8th gen
ram 8 GB
hard HDD 1TB
hard SSD 500 GB
NIVIDEA GEFORCE MX130
Microphones disabled
After I installed Auslogics and ran all the tests, my camera and microphone were disabled. I managed to turn the camera back on but not the microphone even after going into my Privacy settings and enabling it. It happened on both machines, one with a Logitech headset and the other with a Jabra 510 speaker. Both microphones are still not functioning. Please advise. I am running Windows 10 on both desktops.
Ноутбук не включается без подключения к сети переменного тока и выключается при её отключении
Ноутбук не включается без подключения к сети переменного тока и выключается при её отключении.
Обновил всевозможные драйвера, обновил биос(правда теперь появилась надпись при запуске "Checking media...").
Проверил состояние батареи через консоль(часть отчета прикрепил файлом) и там осташееся емкость 12 октября остановилось на одном значении, т.е. батарея не заряжается и не разряжается.
Что делать в данной ситуации, чтобы ноутбуком вновь можно было пользоваться автономно?
Unable to make screen lighter or darker
I don't remember what I did when I used the Auslogics BoostSpeed 11 free version. I can't recover the previous windows versions, because they were deleted. I went to the recovery center and it didn't help me with retrieving my lost files. Prior to trying this software, I was able to control the brightness of my screen. I have tried to load the HP graphics, and it says that my computer doesn't meet the requirements.
Skipped traces
Lanovo with windows 10
Just upgraded to latest BoostSpeed 11 and have a problem I NEVER had with the precious version ~ 245 traces in the broswer SKIPPED! Made repeated attempts, alwys 245 skipped! Not good!-
PS, forcing a "Subcatagory" selrection makes ZERO sense. the categoriars are inane!
Word Document Files
Does your Duplicate File Finder work only on image, video, audio, archives and application files?
How to find duplicate Word document files, pdf files etc ?
unidentified files following upgrade to Win 10 version 2004 prevent defragmentation
I have recently upgraded my Win10 x64 PC to version 2004 from Windows update. Prior to the upgrade the PC was clean and fast and the system drive was defragmented using Auslogics Defrag Ultimate. Fopllowing the upfgrade and subsequent cleanup, I ran defrag again and the drive now has approximately 20% of its used capacity filled with files that Auslogics Defrag will not identify (light green block icons, mouse click for file info invokes the prompt "This block contains file system service data. Detailed view is not available".
This is obviously some several GB of data judging by the number of blocks occupied in this manner - but I am unablæe to find out what these files are, what they are called, what purpose they serve or where they are on the drive. They are spread out across the system drive and thus prevent defrag running a free space defragmentation, and thus casue even more fragmentation when new files are added to the drive.
I have tried tio google this problem but have not found any reference to it. Auslogics defrag is the only untility that tells me these file exist - but no more than that.
Can you advice - what are these files, and how do I get rif them and run the usually perfect free space defrag?
thanks / Adrian
This is obviously some several GB of data judging by the number of blocks occupied in this manner - but I am unablæe to find out what these files are, what they are called, what purpose they serve or where they are on the drive. They are spread out across the system drive and thus prevent defrag running a free space defragmentation, and thus casue even more fragmentation when new files are added to the drive.
I have tried tio google this problem but have not found any reference to it. Auslogics defrag is the only untility that tells me these file exist - but no more than that.
Can you advice - what are these files, and how do I get rif them and run the usually perfect free space defrag?
thanks / Adrian
Как корректно обновить программу Auslogics?
Здравствуйте. Сегоодня вышла новая версия программы и возникает резонный вопрос - как установить обновление? Придется полностью удалять старую версию (с помощью спецпрограмм типа Revo) и устанавливать новую? Или есть еще другой вариант?
Lock-screeen blury
Hello!
When starting my computer (or when locked) I'm allways directly prompted for password or pin, whith a blury picture in background.
However I like those beautyful pictures and would like to see them clearly prior to logging in. What to do?
/Björn-Ove
When starting my computer (or when locked) I'm allways directly prompted for password or pin, whith a blury picture in background.
However I like those beautyful pictures and would like to see them clearly prior to logging in. What to do?
/Björn-Ove
Lost files in Downloads folder ????
I've just done a action in bootspeed 13 after I downloaded update and it has wiped out ALL my files in my windows downloads folder so I am not very happy with this !!!! Is there anyway that I can recover these files ???? I'll leave my laptop switched on in the hope that I can get an answer from you to assist me in this recovery of the many files I have lost/
Thank you John Blair 10.31 UK time on 04July24.
Thank you John Blair 10.31 UK time on 04July24.
Use of optimizing tool
Greetings
I have a aquestion the Optimization tool I notice that when you click on it a bunch of sine wave patterns show up. Well what is the meaning of all this and how do I use it?
I have a aquestion the Optimization tool I notice that when you click on it a bunch of sine wave patterns show up. Well what is the meaning of all this and how do I use it?
start up automatic repair comes up which keeps coming up forever
I have a problem with every time I start up automatic repair comes up which keeps coming up forever if I don't click F8 and click Disable forced Driver Signature! After I click F8 windows starts up and runs normally. what do i do this problem? Can you help me? Hope you have a solution for me.
With best regards
Peter Hansen
Content hidden to protect privacy
Internet speed settings
Its really hard to believe that the internet speed settings for 5Mb/s are the same as for 900+Mb/s. And what about using AI inthis application?????
MS Constantly changes default brower and search engin
I am econstantly having to replace the default browser and search back to Chrome & Google becaseu Microsoft changes them to Edge & Bing.
Is it possible to control this in the Registry?
Is it possible to control this in the Registry?
New download won't run
I downloaded the suggested new Auslogics Disk Defrag 11. Now it won't run. It says "The execution cannot proceed because AxComponetsVCL.bpl was not found. Reinstalling the program may fix this problem".
Not very happy about this.
Since I just completed "downloading and installing" the updated version, how the heck am I supposed to accomplish this?
How do I get back to the Defrag that worked?
Not very happy about this.
Since I just completed "downloading and installing" the updated version, how the heck am I supposed to accomplish this?
How do I get back to the Defrag that worked?
Perte souris et pavé tactile sur ASUS R702U
Bonjour,
A l'occasion d'une mise à jour des drivers, (Windows 10) la procédure s'est bloquée.
j'ai dû arrêter mon portable (CTRL ALT DEL).
Au redémarrage plus de possibilité de valider une action.
Plus de pavé tactile, plus de souris !
Comment pouvoir ré-utiliser mon portable ?
Je vous envoie cette question de mon poste fixe
Comment choisir une langue de contact par défaut; mon anglais est scolaire et ancien.
Merci de votre réponse.
Cordialement.
R CHAUVET
A l'occasion d'une mise à jour des drivers, (Windows 10) la procédure s'est bloquée.
j'ai dû arrêter mon portable (CTRL ALT DEL).
Au redémarrage plus de possibilité de valider une action.
Plus de pavé tactile, plus de souris !
Comment pouvoir ré-utiliser mon portable ?
Je vous envoie cette question de mon poste fixe
Comment choisir une langue de contact par défaut; mon anglais est scolaire et ancien.
Merci de votre réponse.
Cordialement.
R CHAUVET
Dateiwiederherstelung
Ich finde die mit Auslogics BoostSpeed 13 wiederhergestellten Dateien auf meinem Computer nicht.
Recherche de logiciel
Quels logiciel gratuit me conseillez-vous pour rendre mon PC plus performant rapide et un bureau attrayant
There is no Chinese in the language options
Chinese is not currently available in the language options. I kindly request your team to consider adding Chinese to the language library.
PC shuts off
Why does my pc randomly shut off its not over heating because the temp says its fine and when turned on cpu and vga red light turn on and off
Lost MBR?
I have about a dozen 2.5" & 3.5" SATA HDs, no bigger than 4TB that I have been using for years without issue. They are used in conjunction with via a WAVLINK eternal docking station, holds 2 drives" to USB. Recently, one HDs, 3TB one, when I tried to use it, I got an error message, "invalid parameter", "drive is not accessible or corrupted" or something like that. So I used the DSK command in Window 11 and it showed up as a "healthy drive" but showed up as "RAW" (needed to be formatted basically of course) instead of NTFS as it should be. I took this situation to be a fluke but just now, with two 4TB drives in at the same time in the docking station, the same thing happened TO THEM BOTH. I had them connect to my laptop for several hours then suddenly got the "drive not accessible" error. Same issue as before basically and back to RAW. Correct me if I'm wrong but does this very likely indicate that the docking station is creating this problem all of a sudden? It's either that or my laptop is sending something out to the drives that is causing this. Give me your opinion. My bottom question is, I'm assuming the MBR got corrupted or disappeared, of course there could be something else but it's been a very long time since I have messed with HDs on this level. Is there any way without having to send the drives out to have them professionally recovered, something I can do myself at home to re access the drives normally? Thanks in advance, Jim.
computer freezing a lot
I was having a lot of problems with programs and browsers closing, after I installed auslogic, it improved, but I was afraid of it being some deep virus, how can I know, I have the antivirus, but I still have my doubts, because the PC gave a improved, but you will know
lins aus newslettern u.ä. gehen nicht mher
Boostspeed scheint alle links aus nwslettern u.ä. deaktiviert zu haben - ich kann so nicht mehr arbeiten. Wie reparieren?
New in blog
See allRecommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7