After Auslogics did some repairs, alot doesnt work
I really cant type out the problems im having all because there are so many... I just got a Performace Scan message from Auglogics as I am typing this message stating "its been 6 days since your last scan" but im afraid to run anything on auglogics. I need a Tech that knows computers very well to remote connect to my laptop and see if they can fix some if not all of these problems that came about. I will list some of the problems I am encountering but first I want to say that everthing did work before. I used to be a windows insider but now my diagnostic data is set to basic and i cant chage it to full.. In yellow, at the top of the windows settings page it now says that I do not have authorization or this setting is being controlled by your organizer. I dont have an Organizer. Ive never seen that Yellow Font orginazation control lock or what ever it is, ever before until about a week ago when i ran the last scan with auglogics. Its not just on that Diagnostic sending part, I find that I get that controlled by my orginazation lock out on all kinds of settings and controls. I work as a heavy equipment machinery driver and work doesnt even have comptures, im not in school or connected to any school account.. I bought my own brand new laptop about 3 months ago, its connected on my home network Optimum Internet and my outlook account isnt attached to anything but my Xbox One X and like i said it was never there before... I cant type in any Windows app or the task bar without having to hit the windows key + R and enter C:\Windows\System32\ctfmon.exe and then it works, but needs to be done everytime i turn my laptop on... I used to always have my Samsung Fit 64 gig tiny flat USB and my SDXC 64 gig 170Mbps read/write card set to enable read and write and catch. Not Readyboost.. but now i cant do that. both USB and SDXC are all over the place.. I have gigabyte speed from optimum and yet my whole computer runs slow... I cant type in the search bar and get my apps show up, or update, or power plan. nothing... AND for some reason, Ive NEVER had 4 accounts. when i turn my laptop on i can only log into my account like normal. but then when you look at the account users, theres administrator, then there is like 3 accounts of my name.. i dont know what to do
Запуск Виндовс
Доброго времени суток. После пользования вашим продуктом у меня стало чтото не то с загрузкой виндовс. Сначала все идет нормально. Загрузка биоса. Потом заставка загрузки виндовс. Потом у меня экран отключается и в таком состоянии минут 15. Экран от ПК не получает никаких сигналов. Как мне это отключить? Что бы была нормальная загрузка рабочего стола после заставки загрузки виндовс? Это началось сразу же после использование Ауслоджик Буст Спида. Откат системы я сделать не могу.
Démarrage anormal
J'utilise une unité ASUS N73SV sous Windows10 qui me donne entière satisfaction.
Logiciel de sécurité Kaspersky, Firewall Windows, Analyses périodiques par Auslogics Anti-Malware.
Aucune attaque virale jusqu'à aujourd'hui.
Depuis un an environ la touche habituelle de demarrage - au dessus du clavier à droite - ne fonctionne plus; le pc ne demarre pas.
Pour demarrer le pc, il faut appuyer sur la touchei se trouve tout au dessus du clavier à gauche, donc la symetrique de l'autre.
Mais au lieu d'activer directement Windows, cela active le Bios (son de boot tres fort) puis Windows (son de boot normal).
J'ai entrepris plusieurs fois de comprendre et réparer mais sans succès.
Je souhaite revenir à un fonctionnement normal.
Merci de votre aide.
Kind regards,
Jean Farny
Auslogics registry cleaner
Can certain categories be excluded when using registry cleaner?
REASON: after using registry cleaner I get an error message when I open MSMoney. I can correct this using Money setup, but registry cleaner does something to reverse my setup correction.
System: Windows 7 Home Premium
Отвалился BlueTooth
Добрый день
на обоих моих ноутбука пропал блутус. Возможно что то позволил исправить программе не проконтролировав. Как включить блютус снова? В скрытых девайсай его вижу. Система предлагаетпереустановить драйвер, но дело явно не в этом.
Здравствуйте, программа Auslogics не запускается вместе с включением компьютера, как исправить?
Здравствуйте, программа Auslogics не запускается вместе с включением компьютера, как исправить?
Disco duro se encuentra al 100%
Hola, ultimamente he notado que mi disco duro se encuentra al 100% y las aplicaciones se abren lento, cuando tenia windows 7 no me pasaba esto supongo que es por el sistema operativo tengo windows 10 pro, ¿habra una solucion para bajar el uso del disco ?
POST interruption
What could be the problem when most of the time during Boot on Message "Warning System Boot fail or post interruption".
Press continue or press del to load bios setup.
Why auslogics boostspeed can't solve this ?
Hello. I'm a regular gamer, but when I play a game, no matter which one, my computer always crashes. Everyday, for months. I have used boostspeed 11 many times to fix this, but despite what Auslogics promised, my computer is no more stable than before. Nothing has changed. So I’m wondering what it pays to pay for software that promises to take care of our computer’s system, if it’s just basic operations that don’t solve anything. If nothing changes, I will not renew my subscription. If you need information about my hardware, don't hesitate to ask me. Thank you. Sincerely, Arnaud
Temperature
I am using Windows 8.1. Is there a provision in BoostSpeed 11, for setting the Disk/Processor Temperature at which the PC will switch off?
ms-resource: ProductName を取り除きたい
Windows10 バージョン 2004 (OSビルド 19041.207)
スタートメニューのその他グループに
"ms-resource: ProductName" を取り除きたい
このアプリは開かず、アンインストールもできない
Windows 10 logon password via Auslogics
Hello!
I am not new to Aulogics - great product! However, I am a new Aulogics 11 user. In Aulogics, in trying to bypass Windows 10 Logon on my Lenovo, I believe the password that was pre-autofilled may have been incorrect? I chose by-pass Windows logon, however when my laptop restarts the first User screen tells me my Password is incorrect. How do I fix this in Aulogics? Any help would be appreciated! ~Catherine Trager
Повышенное потребление ресурсов
Периодически всплывает уведомление о повышенном потреблении ресурсов. По клику открывается Task Manager, из информации в котором я понимаю только, что процессор загружен на 100%, оперативная память тоже. Я и сам замечаю, что компьютер часто тормозит и процессор нагревается до 50 градусов.
Компьютер новый (моноблок Lenovo, W10), программ в автозагрузке не более десяти. Прежний моноблок, которому более пяти лет с W 8.1, на котором установлено гораздо больше программ, ведёт себя гораздо резвее.
И что со всем этим делать? В Task Manager не вижу каких-либо инструментов. Уж не сама ли ваша программа Auslogics Boost Speed 11 тормозит систему?
Кэш второго уровня
Здравствуйте, в прошлых версиях была возможность через Tweak Manager включить исплользование кэша втрого уровня. В 11 версии неполучается найти данную функцию. Подскажите как это сделать.
System Restore
Desktop just started on off when sitting in sleep mode, A tried to update Microsoft Windows 10, took update, Still on off multi. times daily B, tried System restore tells me could not preform System Restore Still on ,off mode , C What setting in resuce center would fix this System Restore problem.s all from same date around System 3 or 4 from same date close to restore point date. Is Boostspeed 11 causing this problem
help needed
Hi, I don't think it's about you, but if you can help me I'll be very grateful.
i have two devices
1.micro sd 16GB apacer
2.flash memory 16GB apacer
these two device now is WRITE PROTECTED and i have download every tools and tricks exist in world for flash these but no one responding.
now pls pls pls pls pls pls help me in my country there is no official represent from apacer or others pls help me tnx a lot and i very respect u and ur works and apps
respectful.TOOFAN
Add Folder (PIN) to Quick Access Not Working
I have run an elevated command prompt - commands ...
I ran "sfc /scannow", and it said "Windows Resource Protection found corrupt files but was unable to fix some of them".
I ran "DISM /Online /Cleanup-image /Scanhealth", and it said "No component store corruption detected".
I ran "CHKDSK C:", and it said "Windows has scanned the file system and found no problems".
When I get to the command prompt through the Recovery Window it opens as directory X: not C: and when I use the cmd X:/cd.. it does not show C: only X: drive letter
cleanup of the registry
Fake scan
IRQL NOT LESS OR EQUAL - PANTALLA AZUL AL PRENDER LAPTOP
AL PRENDER LA LAPTOP HP OMEN SE CORTA LA CARGA MOSTRANDO UNA PANTALLA AZUL CON ERROR DE IRQL NOT LESS OR EQUAL Y SE REINICIA LA PC, PERO OCURRE VARIAS VECES HASTA QUE INGRESA A WINDOWS. LAS PANTALLAS AZULES CAMBIAN VARIAS VECES COMO:
- IRQL NOT LESS OR EQUAL
- SYSTEM THREAD EXCEPTION MODE
- KERNEL SECURE BOOT MODE
- BAD POOL CALLER
- A VECES INDICA QUE LO QUE FALLO ES EL ARCHIVO ntoskrnl.sys Y APCI.sys
ESPERANDO SUS RESPUESTAS AL ERROR PRESENTADO, YA ACTUALICE LOS DRIVERS CON AUSLOGIC DRIVER UPDATES, CORREGI CON REGISTRY CLEANER PERO SIGUE OCURRIENDO
System Events Notification Service
After realizing this, I went to my system restore, to restore my computer, but I was stunned to see that there was only one option, and that was for the SEP 24 date. I had no idea if this date (and time) was before or after the incident. When I tried to restore, I ended up getting a prompt stating that the restore failed. When I went back to the system restore page, the SEP 24 date was gone. So at this point, I knew I was in trouble. I know more that the average person about Windows Operating Systems and I did a lot of research trying to fix this problem which I feel is in the System Events Notification Service. At one point. I had gone into the HKEY system for the System Events Notification Service and changed a "2" to a "1" so as to enable the service. When I restarted, my tool bar was restored and I could move files again, but my tool bar had went to a default icon setting and my speaker volume icon was now hidden. Later, I restarted my WIN 7 Pro HP tower and all the former issues reappeared. What upsets me is that I normally would have taken a screenshot of the file name, but in this case I didn't, because I thought that I would be able to restore the file.
So I just ran your Registry Cleaner and I do not think that I have the correct software that you offer? Is RC10, just a cleaner? Your ad made it seem like it fixed corrupt OS files. Please let me know if RC10 is capable of finding and restoring dll files in my WIN 7 OS. If not, then I am going to contact PayPal and request a refund. If Auslogics has a different software for recovering/repairing dll files, then I will purchase it. About two weeks ago, I purchased a software program due to how it was advertised, only to find out that it only restored "non OS" files and documents. That is not what I was wanting. I need a software program for restoring/repairing OS files.
Program language
I want to learn something.
I am auslogics boostspeed 13 subscriber.
Is there Turkish language support for this program?
If not, when will it be available?
When can we learn.
When there is Turkish language support, do we need to do anything to speak Turkish?
Thank you very much in advance for your answer. Have a nice day again.
RECOVERY OF WIPED IPHONE 14 PRO (NO BACK UP)
Looking forward to hearing from you.
Best wishes
Nikola
Se requiere ver en el administrador de dispositivos de windows 10 el icono de bluetooth
sCAN wINDOWS INSTALLATION ON OTHER dISK
The BSOD error has appeared and my Operating system now does not function.
I had my previous OS on a SSD and now have access to my PC and using an External Disk Hub, I can access the files on my Local Disc (ex) which no longer works which is now indexed as I:
How can I set the Driver Updater to test Drive I: to see if the problem can be rectified and I have access to my specialized programs again?
And can you reference me too the steps to be able to recover my PC please
Velocizzare apertura file cartelle e foto
le cartelle, i file ed in particolare le foto si aprono molto lentamente. come posso velocizzarle ?
USB Logitech G213 Keyboard and G203 Mouse will not connect and operate.
I've used the Auslogics Driver Updated version 2 to make sure all the drivers were current and operational.
I'm running a MSI Rader GE76 12UE 871, with 64 GB Ram, and 3 TB of SSD storage. I've also verified with the MSI Support site that I'm running the latest version of BIOS.
Everything else seems to run just fine.
I can utilize any BT keyboard and mouse without issue.
When I boot the system into BIOS setup, the USB G203 mouse works just fine and allow me to make any selections that I might need. I've also taken both devices to my wife's laptop and they both work just fine there as well so I'm fairly positive there is some setting in the windows environment that has become corrupted and will not allow me to uise these nice devices.
Recommended
DOWNLOAD NOW
Download size: 12,8 Mb