error message
I keep getting this error it wont down load
Notifications
I can not find a way to BLOCK New Auslogics Notifications of upgrades . I have blocked Registry notifications tring to end pop ups of Auslogic Up-grades . IF you can not seem to have FREE upgrades for presently purchased Auslogics 11 , then simply place your up grades into an Auslogics 12 and STOP bugging members with you desiring money for upgrades . Your Subcategory answer question makes NO sense ! This is an Auslogics 11 Programming delima ,none of the subcategory comment shown above have nothing to do with Auslogics 11 , that I know of, as of yet.
Настройка RDP
Windows Server 2016. Как настроить удаленный доступ к этому серверу через RDP? Все где надо включено, а доступа нет. Выдает ошибку "Произошла внутренняя ошибка". Причем к другому серверу с Windows Server 2016 доступ есть.
Auslogics Configuration of Windows old version
I remember that I had an option in previous versions that allowed me to change things in Windows like Legal Rights, or Comments page before login to Windows or right after it.
However, I cant find what is that option in the current version. Could you please help me out?
I prepare storyboards for training and I would like to have a page with some personal information.
Thanks in advance.
Fernando Salmeron
viewing bottom of page.
Start buttons etc., at bottom of page are often off the page.
taskbar is at top of screen
reducing page size ratio is no help
Please help.
Richiesta di un consiglio
Buongiorno,
desideravo un Vs. consiglio:
sono già in possesso di Auslogics Disk Defrag 9.
Per migliorare in generale le prestazioni del mio computer sono indeciso se acquistare:
A) Driver Updater
oppure
B) BoostSpeed 11
domanda: BoostSpeed 11 include già anche Driver Updater ?
... non vorrei acquistare programmi uguali ...
Cosa mi consigliate di acquistare? Driver Updater oppure BoostSpeed 11 ?
Grazie e un cordiale saluto.
старая программа на дисе (с) 64 битная называется 7 максисальная
как я могу убрать лишние файлы и програмы остатки 64 битной системы,очистить диск (с)
Microsoft Visial C++
Hi
I keep getting a message pop up (see attatched)
I have no idea what I have done to cause it to pop up, I also have no idea how to cure it. I have the latest DirectX and as far as I know everything else is up-to-date including Windows.
Most of the time I just hide the message because if I cancel it, it pops back up. However it is now preventing me from launching Unreal Engine so I cannot ignore it any longer I need to sort it out.
Please priovide your answer in simple terms as although I am computer savvy I am no master under the bonnet,programming etc.
bootspeed 5
I have bootswpeed 5 on windows 7. I recently purchases 11 for other windows 10 computer.. I downloaded 11 on windows 7 and now have access to bootspeed 5 and 11 on this 7 computer. Revo uninstaller does not show 5. best way to uninstall bootspeed 5? thanks, jimz
Offline Defragmentation
Is it possible to do offline defragmentation of system files using BoostSpeed 11
my internal speakers are not working anymore
Hi, After purchasing and downloading auslogics boostspeed, driver update, defragmenter and anti-malware, my windows 10 laptops interal speakers are no longer working or even being detected by my computer. I have no idea how to fix this to get them re-enabled. Please help!!
Sound just stopped again
I have had this problem multiple times.
Usually I just delete all sound drivers using Device Mgr.. then restart..
But..
Why does sound fail?
Is there a way to fix through AusLogics?
Cannot install new version of Pro v11.xxx
Whenever I get the message "a new version 11.~ is available, the download completes but will not install.
Check snip pic attached.
Double Clicking
Lately (last several weeks) the vast majority of my on-screen selections require a 'double click' on the mouse in order for advancing. How can I correct this so movement on-screen can be accomplished with just a single click on the mouse? Could this be an associated problem with Boostspeed's notice of "Hish system resource usage detected' and I "might experience extreme PC slowdown"?
used auslogics freeupdater tool after that was given message please wait while updating.
I have premium I used the auslogics free updater to download updates and dnow my computer is bootlooping it dosent even get to the windows screen what can I do I have all sorts of problems with your software please adise what I can do pc boots then turns off boots then turns of or tries to boot,this was fater I updated a driver that I was told was out of date by your system.
Проблема со спящим режимом
Здравствуйте! Исчез совсем из настроек системы спящий режим, после работы программы, помогите исправить, заранее спасибо за безпокойство...
Медленно рабоатет ноутбук
Windows 10 на ноутбуке стал медленне работать. Программы долго открываются и в самих программах операции выполняются дольше. Как можно решить проблему, а потом поддерживать компьютер в рабочем состоянии?
Не работает микрофон
Добрый день.
После очистки и оптимизации компьютера с помощью Auslogics BoostSpeed перестал работать микрофон - и встроенный, и в любых наушниках. Система его видит, во всех настройках разрешено его использование, но на звук никак не реагирует.
На всякий случай прикладываю скрин менеджера программы - в заблокированных файлах есть куча файлов, связанных с драйвером звуковой карты Conexant, после исключения их из списка блокировки все равно не работает. Все это время звук в наушниках и без них есть.
Система
Add Folder (PIN) to Quick Access Not Working
I have run an elevated command prompt - commands ...
I ran "sfc /scannow", and it said "Windows Resource Protection found corrupt files but was unable to fix some of them".
I ran "DISM /Online /Cleanup-image /Scanhealth", and it said "No component store corruption detected".
I ran "CHKDSK C:", and it said "Windows has scanned the file system and found no problems".
When I get to the command prompt through the Recovery Window it opens as directory X: not C: and when I use the cmd X:/cd.. it does not show C: only X: drive letter
cleanup of the registry
Fake scan
Проблема
Drivers
Here's a snapshot of the drivers.
Could someone tell why this is happening?
IRQL NOT LESS OR EQUAL - PANTALLA AZUL AL PRENDER LAPTOP
AL PRENDER LA LAPTOP HP OMEN SE CORTA LA CARGA MOSTRANDO UNA PANTALLA AZUL CON ERROR DE IRQL NOT LESS OR EQUAL Y SE REINICIA LA PC, PERO OCURRE VARIAS VECES HASTA QUE INGRESA A WINDOWS. LAS PANTALLAS AZULES CAMBIAN VARIAS VECES COMO:
- IRQL NOT LESS OR EQUAL
- SYSTEM THREAD EXCEPTION MODE
- KERNEL SECURE BOOT MODE
- BAD POOL CALLER
- A VECES INDICA QUE LO QUE FALLO ES EL ARCHIVO ntoskrnl.sys Y APCI.sys
ESPERANDO SUS RESPUESTAS AL ERROR PRESENTADO, YA ACTUALICE LOS DRIVERS CON AUSLOGIC DRIVER UPDATES, CORREGI CON REGISTRY CLEANER PERO SIGUE OCURRIENDO
System Events Notification Service
After realizing this, I went to my system restore, to restore my computer, but I was stunned to see that there was only one option, and that was for the SEP 24 date. I had no idea if this date (and time) was before or after the incident. When I tried to restore, I ended up getting a prompt stating that the restore failed. When I went back to the system restore page, the SEP 24 date was gone. So at this point, I knew I was in trouble. I know more that the average person about Windows Operating Systems and I did a lot of research trying to fix this problem which I feel is in the System Events Notification Service. At one point. I had gone into the HKEY system for the System Events Notification Service and changed a "2" to a "1" so as to enable the service. When I restarted, my tool bar was restored and I could move files again, but my tool bar had went to a default icon setting and my speaker volume icon was now hidden. Later, I restarted my WIN 7 Pro HP tower and all the former issues reappeared. What upsets me is that I normally would have taken a screenshot of the file name, but in this case I didn't, because I thought that I would be able to restore the file.
So I just ran your Registry Cleaner and I do not think that I have the correct software that you offer? Is RC10, just a cleaner? Your ad made it seem like it fixed corrupt OS files. Please let me know if RC10 is capable of finding and restoring dll files in my WIN 7 OS. If not, then I am going to contact PayPal and request a refund. If Auslogics has a different software for recovering/repairing dll files, then I will purchase it. About two weeks ago, I purchased a software program due to how it was advertised, only to find out that it only restored "non OS" files and documents. That is not what I was wanting. I need a software program for restoring/repairing OS files.
Program language
I want to learn something.
I am auslogics boostspeed 13 subscriber.
Is there Turkish language support for this program?
If not, when will it be available?
When can we learn.
When there is Turkish language support, do we need to do anything to speak Turkish?
Thank you very much in advance for your answer. Have a nice day again.
RECOVERY OF WIPED IPHONE 14 PRO (NO BACK UP)
Looking forward to hearing from you.
Best wishes
Nikola
Se requiere ver en el administrador de dispositivos de windows 10 el icono de bluetooth
sCAN wINDOWS INSTALLATION ON OTHER dISK
The BSOD error has appeared and my Operating system now does not function.
I had my previous OS on a SSD and now have access to my PC and using an External Disk Hub, I can access the files on my Local Disc (ex) which no longer works which is now indexed as I:
How can I set the Driver Updater to test Drive I: to see if the problem can be rectified and I have access to my specialized programs again?
And can you reference me too the steps to be able to recover my PC please
Velocizzare apertura file cartelle e foto
le cartelle, i file ed in particolare le foto si aprono molto lentamente. come posso velocizzarle ?
USB Logitech G213 Keyboard and G203 Mouse will not connect and operate.
I've used the Auslogics Driver Updated version 2 to make sure all the drivers were current and operational.
I'm running a MSI Rader GE76 12UE 871, with 64 GB Ram, and 3 TB of SSD storage. I've also verified with the MSI Support site that I'm running the latest version of BIOS.
Everything else seems to run just fine.
I can utilize any BT keyboard and mouse without issue.
When I boot the system into BIOS setup, the USB G203 mouse works just fine and allow me to make any selections that I might need. I've also taken both devices to my wife's laptop and they both work just fine there as well so I'm fairly positive there is some setting in the windows environment that has become corrupted and will not allow me to uise these nice devices.