1794 questions
Bricked my HP Evo Prod ID 669a1ua after driver update
So I'm old-school (DOS Win 3.11) computer-savvy...but not much more (never heard of secure boot/TPM/Bitlocker - until I used your program to update a bunch of drivers (probabally the BIOS) and I got BSOD demanding Bitlocker key and after 3 days found no darn way around it. Finally went to HP Cloud recovery (supposed to resture factory config) but this tool does not work for me (gets stuck in a boot loop...internet search did not reveal fix/work-around that I haddn't tried; i.e at the BIOS I turned off Secure boot, allowed USB Boot, made that the first boot device...even tried re-directing the boot loader to the flash drive...but I digress).
Only thing left seemed to be a clean install using flash drive media from MS website to download installer for W11 and then het drivers from HP. So...Flash installer W11 called-up a view of the diskpart showing X: as "System" with like 200MB, C: is the main partition with ~433GB and is BITLOCKED... and then there is a small Recovery partition.
So the only partition I might use was the Bitlocked one...thus I had to delete it and ReFormat to do the clean install.
...So far so good!
Now I go top HP and get my wlan drivers...install from recovery CMD using pnpuil...and I fire-up Windows.
I get the intro screen to select my language, then keyboard, then it hangs at "lets get you connected to the internet"
so - TWO questions: (1) what othe (critical) drivers might I need to get online? Here's the list of possibilities: https://support.hp.com/us-en/drivers/selfservice/closure/hp-spectre-x360-16-inch-2-in-1-laptop-pc-16-f1000/2101006126/model/2101006145 and
(2) I tried just installing "all" of the available drivers...but I ran out of room???
It seems that even when I'm at he C:\ prompt - everything I install actually goes to the X: partition [which has run out of space now...] Is there some kind of start-up initialization pointer thats redirrecting "System" traffic/commands to X: (instead of c:\Windows\System\System32 - where drivers usually reside?
- If so - how do I change it?
- If not then might it relate somehow to the fact that I never really "completed" the install process?
Also FYI - now that I have gotten around Bitlocker I tried the HP Cloud recovery again and got the same blind boot loop.
Thanks for your help
-Adam
Only thing left seemed to be a clean install using flash drive media from MS website to download installer for W11 and then het drivers from HP. So...Flash installer W11 called-up a view of the diskpart showing X: as "System" with like 200MB, C: is the main partition with ~433GB and is BITLOCKED... and then there is a small Recovery partition.
So the only partition I might use was the Bitlocked one...thus I had to delete it and ReFormat to do the clean install.
...So far so good!
Now I go top HP and get my wlan drivers...install from recovery CMD using pnpuil...and I fire-up Windows.
I get the intro screen to select my language, then keyboard, then it hangs at "lets get you connected to the internet"
so - TWO questions: (1) what othe (critical) drivers might I need to get online? Here's the list of possibilities: https://support.hp.com/us-en/drivers/selfservice/closure/hp-spectre-x360-16-inch-2-in-1-laptop-pc-16-f1000/2101006126/model/2101006145 and
(2) I tried just installing "all" of the available drivers...but I ran out of room???
It seems that even when I'm at he C:\ prompt - everything I install actually goes to the X: partition [which has run out of space now...] Is there some kind of start-up initialization pointer thats redirrecting "System" traffic/commands to X: (instead of c:\Windows\System\System32 - where drivers usually reside?
- If so - how do I change it?
- If not then might it relate somehow to the fact that I never really "completed" the install process?
Also FYI - now that I have gotten around Bitlocker I tried the HP Cloud recovery again and got the same blind boot loop.
Thanks for your help
-Adam
Windows Update
Error message: "Your device is missing important security and quality fixes.", tried several fixes...no result.
DRIVER UPDATER REFUSES TO CONNECT
Any idea as to why this is happening? I have registered the program in the WIN firewall, but no success. All other Auslogics software is working without a hitch.
Thanks for your help!
James
Thanks for your help!
James
heute kein Zugang zum Abruf der Treiber-Daten
Gibt es ein technisches Problem beim Zugang zum Datenserver?
Mots de passe
Bonjour,
BootSpeed a chaque analyse du système, il me supprime les mot de passe et a chaque fois je suis obligé de resaisir ce dernier.
Comment effectuer de facon que BS ne supprime plus les mots de passe ?
Cordialement
Denis Schmitt
BootSpeed a chaque analyse du système, il me supprime les mot de passe et a chaque fois je suis obligé de resaisir ce dernier.
Comment effectuer de facon que BS ne supprime plus les mots de passe ?
Cordialement
Denis Schmitt
USB
I had my PC repaired (for a new heat sink) and
now, the USB Ports on the front of the PC don't
work anymore. The back ones work fine.
Is there an easy fix?
now, the USB Ports on the front of the PC don't
work anymore. The back ones work fine.
Is there an easy fix?
Anti-virus
Bonjour !!
J'ai installé CCLEANER mais crains qu'il détruise des fichiers considérés comme étant des virus mais qui n'en sont pas comme par exemple "setup.exe". Windows Defender a complètement détruits des fichiers qui n'étaient en aucun cas des virus. Je n'ai pas réussi à les récupérer.
Dois-je craindre la même chose avec CCLEANER ?
Je vous remercie d'avance pour la réponse que vous voudrez bien me donner ...
Cordialement,
Eric
J'ai installé CCLEANER mais crains qu'il détruise des fichiers considérés comme étant des virus mais qui n'en sont pas comme par exemple "setup.exe". Windows Defender a complètement détruits des fichiers qui n'étaient en aucun cas des virus. Je n'ai pas réussi à les récupérer.
Dois-je craindre la même chose avec CCLEANER ?
Je vous remercie d'avance pour la réponse que vous voudrez bien me donner ...
Cordialement,
Eric
Velocidad de la computadora
¿Qué puedo hacer para que mi computadora siempre funcione lo más rápido posible?
Trial
Hey huge fan and long time user of the free edition and was wondering can i get a week trial please as im thinking of buying ? My PC is still running crappy
Thanks in Advance
Thanks in Advance
Fehlermeldung
Hallo,
Leider kann ich keine Software mit dem Programm mehr aktuallisieren es kommt immer dieselbe Fehlermeldung:
failed download failure
was verhindert die Aktuallisierung bei dem Programm.
Als Virus Programm nutze ich Kaspersky
Als Betriebssystem nutze ich Windows 10 Pro
mfg Klaus Schwabe
Leider kann ich keine Software mit dem Programm mehr aktuallisieren es kommt immer dieselbe Fehlermeldung:
failed download failure
was verhindert die Aktuallisierung bei dem Programm.
Als Virus Programm nutze ich Kaspersky
Als Betriebssystem nutze ich Windows 10 Pro
mfg Klaus Schwabe
Problème fonctionnement Bluetooth
Bonjour, suite à une mise à jour de Windows (?), mon clavier Bluetooth n'est plus reconnu. Dans "paramètres", il est indiqué : installation bloquée par stratégie de groupe.
Que dois-je faire pour réutiliser mon clacier normalement ?
Merci par avance
Cordialement
Que dois-je faire pour réutiliser mon clacier normalement ?
Merci par avance
Cordialement
Intel Graphics Installer Not Prompt Back After Loading For Install
Dear Sir /Madam,
I'm facing Intel Graphics Installer not prompt back after loading for continue install start on version Driver 31.0.101.4644 WHQL. Need some advice what when wrong and how to resolve.
I'm facing Intel Graphics Installer not prompt back after loading for continue install start on version Driver 31.0.101.4644 WHQL. Need some advice what when wrong and how to resolve.
random shut down of my laptop
recently my sony vaio laptop strted shutting of randomly. can you help.
Auslogics BoostSpeed 12について
「Auslogics BoostSpeed Pro12」「Auslogics Driver Updater」と「Disk Defrag Ultimate」のボタンがありますが、インストールすると別途、料金が発生するのでしょうか?
504 Auslogics files designated as Malware
504 Auslogics file were identified by Malwarebytes as being potential Malware.
How can that be? Does Auslogics provide unsafe software?
Please remedy now!
File attached for your review
How can that be? Does Auslogics provide unsafe software?
Please remedy now!
File attached for your review
No Windows Update KB5008212
From a couple of months now, I am unable to install Windows Update "Windows 10 Version 21H1 for x64 Systems (KB5008212)". Windows Update is urging me to do so, but all I get is error (0x800f0831). I've tested all kind of solutions from Microsoft and other sources, and tried al least a dozen times, with no success. Some sources insists in the fact you need previous updates installed before this oner, and Bootspeed 12 clears update files as a part of Windows Slimmer tool. Is the first time I experience a problem like this and, even not critical, is worrying me because I can get a solution. Best regards.
Cannot open Auslogics 12 on my other laptop
Hi, this may have come through twice, sorry if it has, but I have 3 laptops which I pay to use your excellent software. My other laptop, a Lenovo T520 is showing an error message from MS ...the adminsitrator has blocked me from running the auslogics app. It then says contact the adminsitrator...I am the adminsitrator ..the only user of that machine. Does MS have a problem with Auslogics? Can you help me sort this problem out and enable me to open your software as and wehen I need to...weekly? VMT Chris
laptop acer aspire 5735Z
after I ran bootspeed and tutorals 1-4 my laptop will not shutdown it starts to close then boots to sign in page only way i can shut down is to remove battery it han never done this before now hope you can help me with this problem
thx Sean
thx Sean
Tab Crashes when go to Look at Report from Deep Disk Cleaner
After I run my Auslogics Boostspeed (makes a backup). I go to look at report and get error "Gah. your tab failed" What/Why does this happen? I don't know how to attach the report. Sorry (Old Lady)
task manager
i'm unable to get into the task manager. everytime i try to load it is get an error message
when right click in file explorer, it load very slow
my laptop is so far no problem, but everytime when i am using the file explorer, when i right click certain file, it load for a long time. My laptop is quite new, it is nitro 5 and i don't know why this issue exist, I am looking forward to solve this issue. thanks a lot!
what diveces can be added to make compatable with windows 11
How bring Motherboard up to date when it is 11 years old and running windows 10 ok I don't have aTPM 2.0 conection avalable or anything else that will make it happen?
Мой Сканер
Вопрос не о Spotify а AutoLogics BoostSpeed 12 Можно ли исправить определенные ошибки а не нажмиать Исправить Все?
My Scanner
I ran My Scanner 5 times and there still something to fix. It is like this all the time, is there something I should do before I scan?
I am including a screen catched.
Fences Requires Reentry of Product Code Everytime BoostSpeed Runs
Hi,
I have had Fences for many years. When BoostSpeed runs its weekly maintenance, I must re-enter the Fences Product Key to re-register the product. I do this and Fences works fine again.
This problem occurred several years ago and you provided a fix where BoostSpeed does not delete/address a file required for Fences related to the product key.
Would you please re-send those instructions if that would resolve the issue or advise other solutions to resolve?
Thank you,
Rich Sullivan
I have had Fences for many years. When BoostSpeed runs its weekly maintenance, I must re-enter the Fences Product Key to re-register the product. I do this and Fences works fine again.
This problem occurred several years ago and you provided a fix where BoostSpeed does not delete/address a file required for Fences related to the product key.
Would you please re-send those instructions if that would resolve the issue or advise other solutions to resolve?
Thank you,
Rich Sullivan
freeing Memory usage
Hi Guys,
I have noticed some apps reserves too much memory for itselfs like Google Chrome,
is it possible to get Auslogic Bootspeed 12 to free some of the memory on a regular basis, for example when it reaches 85% of usage?
also it would be nice to improve memory and CPU by disabbling things that are not required when we want to get out more performance from our PC,
The BS12 RAM and CPU optimization seems to be going into that direction, but require a little bit of more control over processes?
I have noticed some apps reserves too much memory for itselfs like Google Chrome,
is it possible to get Auslogic Bootspeed 12 to free some of the memory on a regular basis, for example when it reaches 85% of usage?
also it would be nice to improve memory and CPU by disabbling things that are not required when we want to get out more performance from our PC,
The BS12 RAM and CPU optimization seems to be going into that direction, but require a little bit of more control over processes?
Quanti pc
Buongiorno, un saluto cordiale, ho comperato due versioni pro , la domanda e: a quanti pc posso mettere la licenza adquistata?
driver power state failure
Здравствуйте!
Мой ноутбук иногда являет синий экран с сообщением driver power state failure. Ноутбук Hewlett Packard, ОС Виндовс 10.
Антивирус Касперский, ещё стоит Auslogics BoostSpeed 12.
Ноутбук куплен прошлой весной.
Скажите, пожалуйста, существуют ли способы решения этой проблемы?
С уважением, Иван.
Мой ноутбук иногда являет синий экран с сообщением driver power state failure. Ноутбук Hewlett Packard, ОС Виндовс 10.
Антивирус Касперский, ещё стоит Auslogics BoostSpeed 12.
Ноутбук куплен прошлой весной.
Скажите, пожалуйста, существуют ли способы решения этой проблемы?
С уважением, Иван.
Defrag or No?
Hi
Cool software and company. Thanks for your time.
Someone mentioned I should use this, but also said, in accordance with info online, that "defragging" an onboard SSD will cause issues. I'm directly confused by this and would appreciate some guidance on what is correct here.
Thanks again.
Cool software and company. Thanks for your time.
Someone mentioned I should use this, but also said, in accordance with info online, that "defragging" an onboard SSD will cause issues. I'm directly confused by this and would appreciate some guidance on what is correct here.
Thanks again.
Not able to install an upgrade for Boostspeed 12.2.0.0
I am unable to install the upgrade for Boostspeed 12..2.0.0 to 12.2.0.1
After completion of the upgrade software, the Help box remains showing my Version as 12.2.0.0
After completion of the upgrade software, the Help box remains showing my Version as 12.2.0.0
Windows 11
I've upgraded to Windows 11. Are there any issues using BoostSpeed with Win11 that I should be aware of?
Also, I have Norton Anti-virus. Are the two programs compatible or working against each other?
Also, I have Norton Anti-virus. Are the two programs compatible or working against each other?