Delete/clean norton
John Smith
you tube videos and notifications
Lost partition
My disk had a C: drive, for OS and D: drive for my files, photo's etc. While the c: drive was recovered, the d: drive has disappeared. How can I recover the D: drive, please?
Driver is Unavailable
G-HUB
Actualizaciónes
Bricked my HP Evo Prod ID 669a1ua after driver update
Only thing left seemed to be a clean install using flash drive media from MS website to download installer for W11 and then het drivers from HP. So...Flash installer W11 called-up a view of the diskpart showing X: as "System" with like 200MB, C: is the main partition with ~433GB and is BITLOCKED... and then there is a small Recovery partition.
So the only partition I might use was the Bitlocked one...thus I had to delete it and ReFormat to do the clean install.
...So far so good!
Now I go top HP and get my wlan drivers...install from recovery CMD using pnpuil...and I fire-up Windows.
I get the intro screen to select my language, then keyboard, then it hangs at "lets get you connected to the internet"
so - TWO questions: (1) what othe (critical) drivers might I need to get online? Here's the list of possibilities: https://support.hp.com/us-en/drivers/selfservice/closure/hp-spectre-x360-16-inch-2-in-1-laptop-pc-16-f1000/2101006126/model/2101006145 and
(2) I tried just installing "all" of the available drivers...but I ran out of room???
It seems that even when I'm at he C:\ prompt - everything I install actually goes to the X: partition [which has run out of space now...] Is there some kind of start-up initialization pointer thats redirrecting "System" traffic/commands to X: (instead of c:\Windows\System\System32 - where drivers usually reside?
- If so - how do I change it?
- If not then might it relate somehow to the fact that I never really "completed" the install process?
Also FYI - now that I have gotten around Bitlocker I tried the HP Cloud recovery again and got the same blind boot loop.
Thanks for your help
-Adam
Windows Update
DRIVER UPDATER REFUSES TO CONNECT
Thanks for your help!
James
heute kein Zugang zum Abruf der Treiber-Daten
Mots de passe
BootSpeed a chaque analyse du système, il me supprime les mot de passe et a chaque fois je suis obligé de resaisir ce dernier.
Comment effectuer de facon que BS ne supprime plus les mots de passe ?
Cordialement
Denis Schmitt
Anti-virus
J'ai installé CCLEANER mais crains qu'il détruise des fichiers considérés comme étant des virus mais qui n'en sont pas comme par exemple "setup.exe". Windows Defender a complètement détruits des fichiers qui n'étaient en aucun cas des virus. Je n'ai pas réussi à les récupérer.
Dois-je craindre la même chose avec CCLEANER ?
Je vous remercie d'avance pour la réponse que vous voudrez bien me donner ...
Cordialement,
Eric
Velocidad de la computadora
One Click Scanner
The former version of BootSpeed -one click Scanner was running much faster that the new one (version 11).
Is that logical ?
(forget the hereabove Subcategory)
playing videos
The error message says:
(Playback ID: vnJN0H3RgwlSS4V0)
https://youtu.be/u-BqgHfeZss
Lori
Windows Startup
File and Printer Sharing
Win10
CPU Usage
I'm new to the softward. Running v12.
Auslogic is running in the background, I guess. (I didn't start any actions since my recent reboot.)
It's using between 25 and 40% of my CPU capacity. I DO NOT want that to happen. If something's running on its own, how do i schedule it to run during the night.
Why is it doing that? What's running? How can I keep it from starting a process on it's own.
(I know i can hit "End task" in Task Mgr, but I wanted to know how to prevent this in the future.)
Thank you,
SjK
MSFS e Windows10 PRO
Updating to the newer software
Everytime I try to update the software, it goes through all the steps, but does not do the update. It continues to show the original version and reminds me to update again. I have tried this about 10 times with no success.
Windows Bitdefender
The Window Securitu System detects a Trojan in the Auslogics Speedbooster TaskManager.
Do I have a problem?
See attached file.
Sorry it is in French
Running a scan
When I run a scan to clear disk space it always gets stuck at the same point for 30 - 45 minutes.
Unused application files
C\windows\software distribution\datastore\logs\edbtmp.log
Could you help me resolve pleaase.
Boost Speed 12 running very hot
Not really settings. See below!
When running, Boost Speed 12 R 12.0.0.2 and Bit Replicator run very hot with littlel or no explanation! I realize that at start up they will kick in. Later it should not be active.
After a scan, the system is showing 51% on BoostSpeed?????
What is going on?
Buddy Seigel
Deep disk cleaner
Bonjour
Un message m'indique que Deep Disk Cleaner ne peut pas étre lancé lors du démarrage de Boostspeed. Comment puis je le réinstaller ?
Merci de votre réponse.
Cordialement
Laurent MESNIER
Must re-enter product code in Fences after weekly scheduled maintenance
Hello,
Boostspeed runs every Sunday morning as part of scheduled maintenance I set-up. After it runs, I am prompted to re-enter my product key for Fences. I do this and Fences works fine. This is a nuicance though as I should not need to do this - the Fences registration is valid. Given the timing is consistent, I am assuming Boostpeed is causing this issue.
Several weeks ago, I did exempt my Anti-Virus software from scanning the Fences folder which contains the registration certificate. However, the prompts continue.
If Boostspeed is indeed causing this issue, is there a way to have it avoid removing/maninpulating the registration of this software so I don't have to re-enter the product code weekly?
Attached is the dialogue box that appears requesting to re-enter the product key.
Thanks,
Rich Sullivan
Defragmenter related question
There was no option for auslogics defragment so i chose a wrong category.My question is about defragment.Does defragmenting the hard disk HDD daily damage the hard disk or corrupt it ?
The Select full screen/ minimise button is no longer showing at the top right of the screen.
When I first in stalled boost speed 12 it worked fine but now the minimise button is no longer showing. I did implement some of your window 10 tweaks, so could any of these be the reason.
Also I have tried the reinstall the version version 12.0.02 and installed version 12.0.0 but although the button is there at the start, it soon disappears and I can not get it back.
If the internet is cut off around the world
how offline activation future / BOOSTSPEED 12 PRO / key /
Напортачил...
При попытке вернуть всё по умолчанию или перенести в другое место, пишет: "Не удалось сформировать список обычных подкаталогов в "D:\System Volume Information".
Отказано в доступе.
Как вернуть положение по умолчанию???
New in blog
See allRecommended
DOWNLOAD NOW
Download size: 12,8 Mb