1880 questions

проблема с панелью задач

перестала работать панель задач
произошло это так - включаю я пк, немного поиграл, буквально минут 15-20, и меня встретил синий экран, который не смерти, а обычный синий экран ошибки, где пишут перезагрузка, проблема с чем-то (ну вы поняли, да ведь?), после перезагрузки начались проблемы с жёсткими дисками, но я их решил, и после решения проблем с дисками перестала работать панель задач, только открываются ярлыки разных приложений, а вот системные не работают, например пуск, поиск, звук, календарь, да даже настройки не открываются! всё перепробывал! и powershell, ну команды в нём и т.д., всякие приложения.
помогите пожалуйста!
720 views
Mar 20, 2023 at 06:41 PM

File Explorer

How to activate the Mark-coloum?
583 views
Mar 17, 2023 at 04:12 PM

will Boot 13 work on windows XP?

will Boot 13 work on windows XP?
506 views
Mar 17, 2023 at 10:06 AM

Defrag external usb drive?

Hello,

How to I use defrag 11 on an external USB drive?
My little dirve appears in Windows 10 but doensn't show up in your defrag software for me.

Thanks,
joshua
613 views
Mar 17, 2023 at 07:31 AM

Thumbnail

Bonjour,
Les aperçus des miniatures ne s'affichent plus dans Windows 10, pour les vidéos uniquement, les vignettes des photos s'affichent ! !
626 views
Mar 16, 2023 at 11:34 AM

Windows 10 install software as admin

Request a report on what happened to my computer last year during the 12 months when it was attacked by powerful viruses and completely disabled - restore all settings, folders and data, solve device problems on (C, B)
607 views
Mar 15, 2023 at 08:51 PM

fonctionnement quotidien

Bonjour,
Le temps de demarrage et le temps d'arret sont devenus très longs. Que dois-je faire ?
Merci de votre aide.
617 views
Mar 15, 2023 at 09:53 AM

Auslogics - Disk Doctor (Repair)

Hello Sir/Madam.

As per an initial scan with the Disk Doctor, it diagnosed having disk errors on my SSD.

For any further analysis, it states that my SSD will be dismounted and locked while it performs its majic.

My questions:
- What are the consequences if the SSD is not remounted onto my Surface computer,
- Is the Disk Doctor a reliable software, or could I be left in a lurch if the SSD is not reconnected to my computer and
- How long could the repair take. I have a 500 GW SSD.

Regards,

Pietro Di Zanno
745 views
Mar 15, 2023 at 04:35 AM

Auslogics scans

I have been using Auslogics for seceral years now. My question is how long do the results of a scan last. I have noticed for instance that the internet settings hold goo,. the scan in clean-up are good and then the next day they must be deleted again. Does a reboot erase some of youy clean-up for tha same day? Just curious. Any info would be helpfil. Thanks.
667 views
Mar 14, 2023 at 08:36 PM

Registry Cleaner

Hallo Auslogics Team ! Ich hatte mir vor Boostspeed 13 Pro den Auslogics Registry Cleaner Professinal gekauft !
Meine Frage...Sind diese beiden Produktversionen identisch bzw.funktionsgleich ?
Würde mich über schnelle Rückmeldung freuen!
Mit freundlichen Grüßen Klaus Ratje
622 views
Mar 14, 2023 at 01:36 PM

Disk Defrag 11 - Wipe disk blank area function reports 100%, but doesn't actually finish

I know that wiping a large HD can take time, but it reached 100%, the program never repotred it finished. I let it continue to run nearly 12 hours after it reached the 99-100% point. I couldnt close the program either, so I restarted the PC in order to close the program. Dell Percision T3500, 24GB RAM, 8 core Xeon W3540, Win10 x64 on SSD. Everything else runs well. I'm using the paid version of Disk Defrag 11.
624 views
Mar 13, 2023 at 11:13 PM

Defragmentierung einer virtuellen Festplatte

Kann man virtuelle Festplatten mit Eurem System Defragmentieren. Zum Beispiel über eine erweiterte Auswahl.
565 views
Mar 13, 2023 at 09:58 AM

Cannot reinstall MS365 after gone missing

my current & active MS365 suite just vanished from the system, and when I try to download/install the apps on my laptop, it get all the way through the process untl final 10% when get error mressage 30015-11(3221225506). I have dismounterd all system defence software (firewalls, defender, anti-virus) while downloading to remove these as potential constraints, and I have enabled the Windows Update features on the services list (cmd - services.msc)- which were showing as disabled. These however always revert back to 'disabled' once leave the page/screen. I also ran sfc /scannow to check for corrupted files - but all good. Can you assist please
576 views
Mar 12, 2023 at 08:09 PM

Microsoft activation request when there is already validated OEM version on laptop

How to resolve Microsoft activation request when there is already validated OEM version on laptop, and entering the product key that the Auslogics system ionformation report shows as being the valid key for my Win10 install.
751 views
Mar 12, 2023 at 07:56 PM

Start up

When I use Auslogiics to fire up It seems to take a long time befor I can use it
568 views
Mar 12, 2023 at 01:52 PM

habe doch freischaltcode von computerbild

warum kann ich nicht freischalten, wenns nicht geht dann behaltet es eben da bin ich weg
546 views
Mar 12, 2023 at 07:10 AM

Nach Scannen und alles reparieren kein W-Lan

Nach Scannen und alles reparieren kein W-Lan mehr.
Durch rückgängig machen aller von Ihrem Programm gemachte änderungen über Datei/Rescu Center
W-Lan wieder da.
597 views
Mar 11, 2023 at 02:43 PM

Windows 11 Task Bar Not on Top

In Windows 11, when I move the cursor to the bottom of the screen, the task bar does not pop up unless I touch a corner of it. And when it does pop up, it doesnot pop up on top of other windows on the screen. Is this a known issue with windows 11 or is thjere a setting I'm missing?
Keith Johnson
478 views
Mar 10, 2023 at 02:30 PM

Unstable screen images

My screen images can shake slightly and a purple haze appears on and off. Sometimes computer won't restart. Please advise.
590 views
Mar 10, 2023 at 01:41 PM

Error Message

After running Bootspeed for the first time in a long time, I get the error message, "The operating system is not presently configured to run this application." It affects my Bluetooth, plus it is annoying to have the error message popup on my screen every five minutes. Do you recommend that I go to "Restore Points"? I have an early February date available.
1138 views
Mar 04, 2021 at 04:35 PM

Protect Doesn't Recognise MS Edge

It was working for a while on Bostspeed 10, but then it stopped working. I upgraded to Boostspeed 11 because there was no support for BS10 after BS11 came out.

BoostSpeed 11 still doesn't appear to recognise Microsoft Edge

1138 views
Nov 12, 2020 at 08:55 PM

Error system

При работе с Windows 10 постоянно висит система и в диспетчере задач отображено что загрузка диска 100%
1136 views
Dec 14, 2020 at 06:18 PM

Speaker Headset or head phones is unplugged message

Suddenly, I have no sound. Have run all the recommended troubleshooting in settings etc., have NEVER used headphones or headset on this laptop, don't know what else to try?
1135 views
Mar 16, 2021 at 08:04 AM

Temperature raises very high when using Boostspeed 12

I used Boostspeed 11 for some time and never had temperature issues, after de Boostpeed 12 upgrade I noticed that the fan started to make annoying noises and checked the temperature of my Laptop with the Core Temp 1.16 program which says the temp goes above 90 degrees Celsius.

Tried to install 12 again with no result.

Now back to 11 again and the temperature is normal again.

My question is this a normal behaviour of the 12 version of boostspeed?

1134 views
Jan 13, 2021 at 04:57 PM

Bootspeed 12 hung at 13% complete

Started a scan and it is in Stability with a message that says 12047, scanning please wait. Detail screen says 13% complete. Its been like this for 24 hours. What do I do now?

1134 views
Nov 15, 2021 at 10:43 PM

Can't open my Chinese typing software

Dear Sir / Madam,

I am a new user of your company's product - Auslogics BoostSpeed. After I use the boostSpeed, I can't open and use my Chinese typing software (倉頡 and 速成) in window 10.

I went to the Setup > Time and language > language, and still can't find a way to open it.
In BoostSpeed, I don't know how to undo it, so I can use my Chinese typing again.

Please help me solve this problem. Thanks.

Best regards.

Soni
1133 views
Jul 17, 2021 at 11:39 AM

Necesito una solucion

Quisiera que me ayuden con un problema,
puede que halla activado algo por accidente de este programa y ahora ya no puedo cambiar el brillo de la pantalla no encuentro ninguna configuracion, tampoco es un problema de controlador grafico ya lo actualize.
Ayudenme a solucionarlo
1133 views
Aug 10, 2020 at 06:18 PM

Как устранить неисправность

Операционная система не загружается. После включения компьютера загрузка операционной системы прекращается, колёсико всё время крутится и крутится. Такое положение может продолжаться и 1 час, и 2 часа и 4 часа. Больше не пробовал. Иногра, но очень редко, после неоднократного включения-выключения компьютера он вдруг после включения через 11-13 секунд, загружает операционную сисчтему, как это происходило после его покупки в магазине,
Вопрос:. В чём заключается неисправность и как эту неисправность устранить?

1133 views
Aug 31, 2020 at 02:39 PM

Your Defrag program

Can you explain this? I downloaded the "free" defrag version last Saturday. It worked perfectly. On Sunday, I dod my usual maintenance, which includes defragmentation and back-up. Again, it worked perfectly. Today, when I was working I got a message indicating that a "defragment" was urgently needed. So I did yet another defragmentation. Then, for some reason which
I cannot explain, I downloaded the "pro" version of your product. Once it was completed, I did yet another defragmentation. To my surprise, there were files that required yet another defragmentation. My question is, why? Should I really trust that your software is actually doin what it is supposed to?

1132 views
May 24, 2021 at 02:00 PM

New update fails to open

I am running Windows 10 Pro 19043.1052
I have auslogics BoostSpeed 12 Version 12.0.0.4 I get a message that their is a new version available to download and install.
I download the install program auslogics-boost-speed-setup.exe
When I click on the install program I get the error message that the filename, directory name or volume label syntax is incorrect and then the program dissappears. I have enclosed two screen shots. I am unable to install the upgrades. Please help.
1132 views
Jun 18, 2021 at 02:18 AM

sys. eff.

why boost speed reduce ongoing system efficioncy

1131 views
Jan 25, 2021 at 08:04 PM

Rebooting

Is it possible to reboot the HP Elite 8300 computer withot shutting down first?
1130 views
Jan 01, 2021 at 01:43 PM

Перестали работать порты

После исправления ошибок перестали работать порты на ноутбуке.... написало типа много используется устроств
1130 views
Jul 05, 2021 at 10:02 PM

Видеокарта

Проблеми с пуском из за того что ставлю найвисший приоритет в елекропитание видеокарти.Незнаю как решить ету проблему,также после обновления видеокарты .HD5000 виндовс делает перезагрузку системи и появляеца синий екран смерти.До обновлений драйверов видеокарти и обновлений виндовс таких проблем ненаблудалось.

1130 views
Nov 14, 2020 at 04:29 PM

код12

Добрий.Подскажите што мне делать в такой ситуации?

1130 views
Nov 18, 2020 at 05:12 PM

defrag 10 running sooo slow

Used to run fast, I have changed the advanced settings, now running slow,
I guess you cannot know which advanced settings I have enabled, (most of them)
what do you think? and what is your best guess as to my problem?

1130 views
Aug 09, 2021 at 08:23 AM

WIndows Security closes when opened

Hi I'm Raffy and a New member of the Auslogics

When I open Windows Security Application it closes immediately

how do I fix it

1129 views
Oct 22, 2020 at 01:19 PM

about mouse

my pc keyboard and mouse is not working properly
1129 views
Oct 24, 2020 at 06:27 AM

No me deja instalar programas pues este me devuelve una referencia

Lo que sucede es que anterior mente mi computador no le servia el programa Word y pues yo lo desintale y al intentar eliminar mis archivos para volver lo a instalar eliminar, quizas algunos archivos necesarios para Windows, pero el probrema llego en realidad, cuan al intentar instalar de nuevo el office,este se daño, y me dice que Windows ha devuelto una referencia, y asi con todos lo programas, e incluso me desactivo varia aplicaciones, es decir, este no deja instalar programas
1129 views
Jul 22, 2020 at 11:17 PM