activation Boostspeed
I have been using Boostspeed pro for years, and now the software only opens in the free version, even when I copy the activation key received in December by email.
A window appears, saying "Registered software", yet the software remains in free version.
Can you help me solve this problem?
Integrator.exe wird blockiert
"Diese App wurde aus Sicherheitsgründen blockiert.
Ein Administrator hat die Ausführung dieser App blockiert
Weitere Informationen erhalten Sie vom Administrator.
Integrator.exe"
Ich bin selbst der Administrator meines Systems, sehe aber keine Möglichkeit, den Fehler zu beheben.
Bitte helfen Sie mir.
Pro Version
Auslogics 12
versione Pro
Buonasera volevo chiedere se avevo acquistato versione registrata normale o Versione Pro perche nonostante il seriale che mi e' stato inviato
Poi ho notato all'inizio un notevole consumo di risorse CPU.......poi molto dopo si e' Abbassata anche il 70%
pro version
I purchased boot speed pro #
Cannot open Auslogics 12 on my other laptop
My BoostSpeed app will not recognise my Pro status
Examples of this issue in the atchd doc.
My BoostSpeed is the Pro level app and it is good for another 300+ days. However, the app does not know this fact. It will not allow me access to the Pro features. It requires me to buy the Pro level features. I do not understand how the app indicates I have Pro yet at the same time the app thinks I only have the free version.
I do have and have paid for Pro for the 300 days.
When I tired to re-register the Pro license key, it indicates I'm already Pro registered. Yeah, that's obvious. Why doesn't the app know this?
Thank you for your support and education. Shane Ostrom,
Boostspeed lost Pro licence
If I close the program completely and try to re-run I get a message saying that the administrator is blocking me via integrator.exe,
however I am the administrator.
Hope you can help.
проблема со входом в браузеры
activation
it is not possible to activate this application with this key
Application will not recognize Pro version
I have an active license key and discovered today that the app reverted to the free version. I put in my license key and it notes activation to be successful, however still runs as the free version.
To note: I have been unable to access the app itself without having to go into the administrator Windows account, which is a new finding since today as well. Not sure if that's related.
Any help would be great. Thanks.
John
register Problem of the Auslogic boot speed pro12
I had aready register the code the i got the email after paid for it.
and when i check programe registertion its show this programe is registed. but I can not use it as the pro version.
it is still have the Activate pro Version button on the down right side.
Please help.....
Disk Defrag e hard disk da 6 Tb
Ho comprato la licenza credendo fosse quello ma non è successo niente.
Cordiali saluti
Guglielmo Cesari
Активация
Активация PRO
Pro Version aktivieren.
Your Auslogics license information, order #
Ich nutze AusLogics Boost Speed schon sehr lange - mit obigem licence key lässt sie sich nicht aktivieren.
Was ist das los - auch löschen und Neuinstallation hat nichts gebracht.
Mfg
Decker Gustav
Boost Speed 12
Ive entered my Lisence code but my BoostSpeed 12 is still asking me to Activate Pro Version. i.e the green button "Activate Pro Version" is still there at the bottom right of the window..
Tom
Windows Blickpunkt-Bilder
Logging in to dashboard
How can i put a shortcut on Start page (or Taskbar) to log in to my Auslogics dashboard?
RDP keeps disabling on every machine that has boostspeed installed
I notice that intermittently (seems to do it when it wants to), if I reboot a laptop or other physical endpoint, the machine will boot up with the "termservice" disabled, even though groupm policy enforces this to be on.
After troubleshooting group policy, uninstalling all other security software, and weeks of various other troubleshooting methods, the only commonality I can find is that all the machines that do this have boostspeed installed.
I found this post
https://qa.auslogics.com/question/225
And followed the instructions there. I also turned off the performance monitor in boostspeed via the settings, but the issue is still persisting. My next step I guess is to uninstall boostspeed from all of my machines but I figured I would reach out before I give up on the product.
Windows upgrade
Hi
I am using the BoostSpeed11 product prior to an effort to upgrade from Windows 7 to Windows 10.
I have tried before using the product but get the error message 0x8007042B-0x3000D Failure to migrate data on first boot.
I have just cleaned up the zero bytes folders, traces and duplicate files.
There is some thought that antivirus should be stopped while attempting the upgrade. I am presently using Eset internet security.
When performing the migrate data upgrade are all the files carried over? How much should be backed up?
Any hints you can provide will be gold.
In the event that I finally get the upgrade done which of your products should I install, and is it OK to leave the product I have
installed while performing the upgrade?
Eset has logged the driver checker of yours as a pup.What's the go there?
Regards
Petar
default_error_stack
While running the BoostSpeed full system scan, it was taking forever, (around 50 minutes to get to 25% of scanning files). I checked the details and found that it was working its way through the default_error_stack files (several hundred thousand of them) in the windows\system32 folder. because of this I stopped the scan and now need to know how to get rid of these files or get BoostSped to bypass them
Проблема со спящим режимом
Здравствуйте! Исчез совсем из настроек системы спящий режим, после работы программы, помогите исправить, заранее спасибо за безпокойство...
原因不明起動しない
症状
電源を押す
電源ボタンとその隣の起動ボタンが伝統する（チカチカ。。。正常）
１分後消える
数分後 画面に「修復している」と出る
その後様々な修復Optionが出るが、起動していないので何もできない
。。
同じことを繰り返していると突然起動できる（現在のように）
上記の状態が前触れもなく発生する
Two issues:Text freezes and unsatisfactory settings
Also - despite my choice of most comfertable writing thumbnail - set my screen too bright with choppy text.
Please advise
Jessica
NVIDIA 제어판이 안 켜져요
NVIDIA 제어판을 열려고 하면 계속 '현재 NVIDIA GPU에 연결된 디스플레이를 사용하고 있지 않습니다.' 라고 뜹니다. 어떻게 하면 돼나요?
Auslogics registry cleaner
Can certain categories be excluded when using registry cleaner?
REASON: after using registry cleaner I get an error message when I open MSMoney. I can correct this using Money setup, but registry cleaner does something to reverse my setup correction.
System: Windows 7 Home Premium
Bad performance Windows 10
Is there anything i can do for make my pc much responsive and no slowdown? for free
everytime i open anything that using high resources (Google Chrome, firefox, editing app, another apps)
its fine, nothing slow with the google chrome and the apps
but when i closing the Apps that already took up my PC resources 70%,
the CPU and RAM usage back normal
and the windows is very very slow
like the Start Menu is Delay , File explorer slow launch (launch when 5-6 seconds)
anything i can do?
thanks
ANTI-MALWARE PROGRAM CONFLICT W/NORTON SECURITY
Hello - I have your Auslogics Anti-Maleware program and recently added Norton Security. Norton security runs scans in the backgound and for some reason goes after the anti-malware prgram, esentially erasing it. However it leaves my Auslogics BoosSpeed & Auslogics Driver Update prgrams alone, so they continue to run fine. Now every day I have to re-load the anti-malwar program.
I went into Norton checking the Virus & Firewall settings which are set to "allow" your anti-malway program , but it still continues to erase the entire anti-malware application. Do you have any ideas on how to fix this in Norton..?
viewing bottom of page.
Start buttons etc., at bottom of page are often off the page.
taskbar is at top of screen
reducing page size ratio is no help
Please help.
Auslogics Configuration of Windows old version
I remember that I had an option in previous versions that allowed me to change things in Windows like Legal Rights, or Comments page before login to Windows or right after it.
However, I cant find what is that option in the current version. Could you please help me out?
I prepare storyboards for training and I would like to have a page with some personal information.
Thanks in advance.
Fernando Salmeron
Csnnot access new PC from other PCs on LAN
I made the new PC discoverable and not pwd-protected, just like the other three. I set up the Documents folder in the new PC to be shared by Everyone with Full permissions. All four PCs are running Win 10 (ver. 2004). All are wired Ethernet desktop PCs except one existing PC is a Wi-Fi laptop.
This situation is weird because everything works fine when I go to the Search box (next to the Start icon) on any of the other PCs and type \\NewPC\Users\UName\Documents\. The same good result occurs when I set up a shortcut targeting \\NewPC\Users\UName\Documents\.
There is no hardware/connectivity problem because the new PC is seen by all the others and I can access the shared Documents folder\files in either of the two ways just described above.
Am I missing a setting, or something else? Thanks for any help.
гибернация
Здравствуйте! прошу помочь. после гибернации комп сам через несколько минут включается. зарание спасибо.
Problèmes registre
Error al actualizar windows
Recommended
DOWNLOAD NOW
Download size: 12,8 Mb