how to reselove unexpected configuration 0x80004005 when I try to pring

Sunday I had to re-install windows 7 on my computer. After gettting all the updates, drivers etc. I installed Auslogics Boostspeed 12 on the computer. After running the internet opimization my interenet connection went to hell. I called my ISP and after testing on another PC and Laptop (wired) it had nothing to do with my connection. I even took my desktop and laptop to my brothers who has a different ISP with the same slow results.
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached

Please Help. I am beyond frustrated at this poing.
Mike

I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.

All devices listed under sound video and game controllers have yellow error triangles and when you open properties for each it shows "Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)" I have rebooted, uninstalled all and rebooted and nothing changes usb audio has red x and no audio output device is installed and usb camera says camera in use by another app. I have disconnected both after uninstalling in device manager, rebooted then plugged them back in all still come up with error triangles and audio / camera are not functioning.

For about 9 months now often when I click to go from one webpage or website to another my Wi-Fi disconnects. I either must reconnect via the Internet icon or when I run the Windows Network Diagnostics it always tells me that "The default gateway is not available" and it fixes it. I have run all sorts of 'FIXES' found on the internet but still not fixed.

Up to date Windows 10, Firefox & Norton 360. Was doing the same thing when I used AVAST.

Also videos like youtube or anything will glitch for a second at random for no reason. I have factory reset this PC and have not fixed it yet. I don't know if it's windows 10 or this new PC but it is quite annoying My old PC that I gave away never had this problem, but it was also windows 7. Also I don't know the device or subcategory, but I had to put something :|

Bonjour,
J'utilise une unité ASUS N73SV sous Windows10 qui me donne entière satisfaction.
Logiciel de sécurité Kaspersky, Firewall Windows, Analyses périodiques par Auslogics Anti-Malware.
Aucune attaque virale jusqu'à aujourd'hui.
Depuis un an environ la touche habituelle de demarrage - au dessus du clavier à droite - ne fonctionne plus; le pc ne demarre pas.
Pour demarrer le pc, il faut appuyer sur la touchei se trouve tout au dessus du clavier à gauche, donc la symetrique de l'autre.
Mais au lieu d'activer directement Windows, cela active le Bios (son de boot tres fort) puis Windows (son de boot normal).
J'ai entrepris plusieurs fois de comprendre et réparer mais sans succès.
Je souhaite revenir à un fonctionnement normal.
Merci de votre aide.
Kind regards,
Jean Farny

у меня на ноутбуке делл после обновления программы монитора пропал ползунок настройки яркости есть только ночной режим ина клавиатуре тоже не работает настройка яркости что делать уже не знаю

After I installed Auslogics and ran all the tests, my camera and microphone were disabled. I managed to turn the camera back on but not the microphone even after going into my Privacy settings and enabling it. It happened on both machines, one with a Logitech headset and the other with a Jabra 510 speaker. Both microphones are still not functioning. Please advise. I am running Windows 10 on both desktops.

I have just reinstalled a new windows system to a new SSD HDD

It is still showing errors on Disc Doctor and advises running CHKDSK on restart

As soon as I Scedule a disc scan on restart - it completely messes up the system reloading - and PC will not boot

I have a disc image I took - using acronis so I can use a boot disc and restore - but each time I try to fix the "disc error " my machine will not boot. Is this an SSD error

Advice please

Hello, my display turned pink. I wonder if it is due to Auslogics activity. Can u help me resolve this? I am using Asus Laptop X505Z

Sound is not playing from built in speakers. It only plays through 3.5mm jack.

Гарнитура сопряжается но не подключается к компьютеру, со смартфонам все работает

After initial total scan of my system the webcam is not working anymore.
Any idea ??

Добрый день!
Кое как удалось установить windows 10 на SSD. но при первой же перезагрузке с него не загрузиться никак.
В меню загрузок F9 есть выбор ситем вин 8,1 том1, вин 8,1 том 6 и вин 10, но при выборе вин10 произходит перезагрузка и все заново. В биосе P8Z77-V LX2 (ver. 2501) этот SSD(GPT,NTFS) не виден.
Прошу о помощи!

buged dont fix

I don't remember what I did when I used the Auslogics BoostSpeed 11 free version. I can't recover the previous windows versions, because they were deleted. I went to the recovery center and it didn't help me with retrieving my lost files. Prior to trying this software, I was able to control the brightness of my screen. I have tried to load the HP graphics, and it says that my computer doesn't meet the requirements.

my Ipv4 and Ipv6 is showing it is not connected. ive tried a number of fixes including going to command prompts, ive tried going back to a restore point, however i keep getting an error message saying that files are corrupted and cannot be restored to a previous point. ive run windows trouble shooter, i get this error message 0x800f081f. even when i hard wire my computer using an ethernet cord, my internet does not remain on constantly, it will log me off the internet and back on multiple times. do you have a program that can clean up these window based errors, to be able to restore my computer? i believe the last update i got was 12-13-2020, the day prior to that, my wireless was working. anything you can suggest?