376 questions
Adding Subtitle to Movie
I have a mp4 video (movie) file and the corresponding srt (Chinese) subtitle. I want to add the substitle to the movie and save it with the subtitle either selectable (on/off) or permanently embedded. I have tried to follow procedure numerous times but I am missing or misunderstanding something. How do I do it?
Gostaria de ter
Bom dia!
É possível que a AUSLOGICS adicione ao BoostSpeed algo como o Partition Master, algo que ajude a solucionar problemas mais profundos nos HDDs?
É possível que a AUSLOGICS adicione ao BoostSpeed algo como o Partition Master, algo que ajude a solucionar problemas mais profundos nos HDDs?
Versionsunterschiede von DiskDefrag zu DiskDefrag Ultimate
Was ist der Unterschied der DiskDefrag zu DiskDefrag Ultimate die Im Auslogics Store angeboten wird?
Der Preis von 21,56 € ist ja beiden identisch.
Der Preis von 21,56 € ist ja beiden identisch.
auslogic
Hi, sorry for my poor Englsh... I started reg clean in auslogic but it made some changes in my pc that I did not like. How can I make a recovery?
Change DNS
I am getting the message: 'Attempt to change DNS detected' Adapter: 'Wintun userspace tunnel #223'
How do I deal with this? There is a 'settings' bar but it does nothing when I click on it.
Thank you,
Geoff Parsons
How do I deal with this? There is a 'settings' bar but it does nothing when I click on it.
Thank you,
Geoff Parsons
Pro but not Pro
Your BoostSpeed 13 software recognises I'm a Pro user on Windows 10 (my activation key comes up when I try to regitster). Why would I try to register if I'm already registered? Because the software refuses to recognise my Pro status for several of its features, such as automatic scanning. When I click the checkbox to open the features a dialogue box pops up telling me to buy Pro... even as it's displaying my license key! Really annoying.
updates
i have updated the first driver in the list of drivers to be updated many times, why does it continue to on the list.
i update drivers 2 or 3 times a day but the list doesn't get any shorter,why.
Ausllogics BoostSpeed 13 so difficult to open
Whenever I open Auslogics BoostSpeed to start it does not open , after some 5 mins and several times of tries it will open but is so slow to start to scan ??? After long wait no report on any problems why it did not start. Is this the normal speed of BoostSpeed 13 ???
Disappointed !!!
Disappointed !!!
Recovering Deleted Files
How do I recover my delted One Drive files that were deleted when I upograded to Pro Vestion 13
Recover Data if possible
HP Laptop Pavilion, Win10, 1 Gig HD, i7 processor
I downloaded Auslogics BoostSpeed 13 Free Edition and read about tasks that would help the speed of my laptop. The only section I used was delete unused programs. It showed me a list and I selected about seven or eight items. And later I opened
my desktop and realized I had lost about 30 shortcut Icons. Many that I still use.
I read thru the inforrmation to try to reverse my action. I used the recovery section but keep seeing a popup window telling me to
turn off my anti-virus and firewall and no data was exchanged (I used a restore date one week earlier.) I tried three different restore dates and they all failed with the same pop-up. My question -is there a procedure for correcting my mistake and possibly recovering my desktop icons? Thanks for any direction.
Franklin Disney
11595 Forest Mere Dr
Bonita Springs, Fl 34135
I downloaded Auslogics BoostSpeed 13 Free Edition and read about tasks that would help the speed of my laptop. The only section I used was delete unused programs. It showed me a list and I selected about seven or eight items. And later I opened
my desktop and realized I had lost about 30 shortcut Icons. Many that I still use.
I read thru the inforrmation to try to reverse my action. I used the recovery section but keep seeing a popup window telling me to
turn off my anti-virus and firewall and no data was exchanged (I used a restore date one week earlier.) I tried three different restore dates and they all failed with the same pop-up. My question -is there a procedure for correcting my mistake and possibly recovering my desktop icons? Thanks for any direction.
Franklin Disney
11595 Forest Mere Dr
Bonita Springs, Fl 34135
enregistrement de la clé
Bonjour, je n'arrive pas à enregistrer la clé, à chaque fois et tant de fois le logiciel me demande enregistrer la clé activer la version pro.
MSEdge
Yesterday I ran Auslogics BoostSpeed 13 and it messed up my ability to get into MSEdge. It wasnt until late last night that I figured out what happened but I don't know how to fix it. After running the scan and after clicking on the repair/fix it button, a small screen pops us and asks me to close the following files. They are all msedge.exe (6 or more), but it didn't do that this time and has stopped me from being able to get in MicroSoft Edge. Has my copy of Auslogics BoostSpeed 13 been compromised, have I missed and update or is something else going on? Can you help e with this?
Driver Windows...
3rd Question is regarding with Drivers for my HP PC: Usually I'm using 'Auslogics Driver-Updater to keep All my PC -Drivers Up-to-Date all the Time... but, but at the same time by the way I've used to use 'PC Help Soft Driver Updater and 'Driver- Genius as well other softwares for keeping my PC Drivers up-to-date. And now the ''Question'' is: Are There any Negative effects or affects to break my PC 'Stability or to break my PC Performance if am' I using more then one company Driver-Updaters - Software for only one PC?, or there is no need to be afraid or no need to worry of any negative effects to break my PC 'Stability/Performance and I Can use as many as I want... and as many as I wish 'Driver-Updaters I mean from different companies 'Software for my HP PC...?
update driver
my bluethooth doent work on this laptop so i dont know wht to do or where to go to instaill or update any programs so this laptop would pair with my bluethooth dievices
My 'Subscriptions...?
Hi There...!Again I have a question regarding with my 'Subscriptions and my 2nd Question is:- How Can I ''Manage'' my subscriptions with 'Auslogics ?, and for Example:-How to do this... if in the future I'd preffer or change my mind to 'Cancel one of my subscription with 'Auslogics...how could I 'Cancel a subscription with 'Auslogics? Let me know Please...? Thanks!
ralentissement
Bonjour, je rencontre un ralentissement limitant l'usage de Google Drive. Les affichages sont très longs, les échanges de contenus encore plus...
Je l'ai réinstallé, sans succès.
Je l'ai réinstallé, sans succès.
何回cleanningをおこなってもデフラグや調整項目がある
PCのクリーンアップを目指してscanを行っていますが、何回行ってもデフラグや調整項目が表示されます。
PCのどこかに、基本的な問題点があるのか心配しています。
PCのどこかに、基本的な問題点があるのか心配しています。
New Problem Notifiction
Now, everytime I turn on my computer, I get this notification and I don't know what the problem is.
Removing all traces of google from windows
Is there an efficient way of removing all things (every mention of) Google from my sysem, preferably using your products?
In the pase I have gone through the registry line-by-line and removed anything that says "Google," "Chrome," or "android." this takes a long time and is teadious but I am usually successful in keeping Google out of my life.
In the pase I have gone through the registry line-by-line and removed anything that says "Google," "Chrome," or "android." this takes a long time and is teadious but I am usually successful in keeping Google out of my life.
Notices
I am the target of a very vicious hacker. A short time ago I receieved a notice from Auslogics of a new file that had recently been added into my system. I checked to understand more, then deleted it. However, I was lucky to see this notice. If I am away from my desk and a notice pops up I may miss it. How can I keep track of notices you send so I can circumvent any threats?
SYSTEM SCAN
I have boostspeed 13 Pro. When I do a system scan, the results come back so many mb deframented, etc. But when I resolve, it only clean sonme of them. Maybe 10 mb less. It cleans less on defrag and junk. If i scan again, it cleans all. Why should I have to do it twice? Also, can I set up system scan to be automatically done? And if I can, how do I do it? Please advise.
Thank You,
Doug
gambichler5@aol.com
Thank You,
Doug
gambichler5@aol.com
Slow startup
Good day, old person here.....
I am using Windows 10, do I need both Google Chrome AND Microsoft Edge? I sometimes receive a message from Auslogics saying I may have a privacy issue and that I should look at my privacy settings... but as there is no indication of what the privacy setting should be or what has changed, I don't know what I am supposed to be checking.
Patience and any help offered would be much appreciated!
Thanks & regards
Jacqueline Collier
I am using Windows 10, do I need both Google Chrome AND Microsoft Edge? I sometimes receive a message from Auslogics saying I may have a privacy issue and that I should look at my privacy settings... but as there is no indication of what the privacy setting should be or what has changed, I don't know what I am supposed to be checking.
Patience and any help offered would be much appreciated!
Thanks & regards
Jacqueline Collier
Clearing Privacy History issues
Every day, I start the day, running Advanced System Care, then Glary Utilities, then WiseCare 365, then Auslogics Bootspeed 13, the I reboot and then run ASC again. I have been doing this now, daily, for over 3 years (updating as they are made public). 1st run of ASC... I find privacy issues and then delete them. With Glary's... I run (in Advanced) their "Erase history" under "Privacy" multiple times until I get "Zero" issues found (sometimes up to 15 times to get a zero response). Then I run WiseCare, multipl times (usually around 6 times (main page) and then Under "System Cleaner" I usually only run each section once... sometimes though I run the "Advanced Cleaner" a few times, each time returning a different number of files found and cleaned... but never getting a "zero" found result. NEXT is Auslogics Bootspeed 13 (AB13) I run the main screen, cure the findings... and then I run the "privacy" scan again... and I have done this up to 30 times in a row. The important thing hereis... each time returns a number of files found that is different than the previous time AND there is no pattern to the numbers returned either!
Looking at the past, the Neuroquila virus (circa around 1995) was the first (as far as I know) "polymorphing" virus. It created a "sacrificial virus" to "feed" any existing antivirus program on a machine so that while the antivirus was repairing the created virus the real virus could then attack the antivirus, making it, in the future, always retrun a "no virus found" message to the user. Next, as I recall... comes the concept of "nesting" where when you remove one thing another is created as that one is eliminated.
the above are just 2 examples of why I could be getting the results, daily, that I get BUT... I have stopped these programs after just doing an initial run of each and I have, many, many times stopped them short of doing an all out cleaning and I have done many "all out cleanings" (where I run each program multiple times) and there is a large difference in my end performance of the machine. PS... I do this on all 3 of the machines I have running and NO... I am not making money with my computers... I am a 71 year old man who's retired and od this for cheap thrills and to prove I haven't yet lost my sanity... thank you very much.
Sooooo.... I'd like to buy your program... but only if there's a component in it that let's me state how many times each component within it will run before it stops running.... cause sitting here and re-running these programs for over an hour everyday... just to keep my computer operating at a decent speed (2-I.7... 16 GB Mem, 500 GB SSD, 1- I.5 ... 16GB Mem, 500 GB SSD).
What I want is something I can configure to run multiple passes of the different compnents within your software so I can set it and then go do something else while it scours, re-scourts and rescours again as many times as I want it to.
Cool?
Looking at the past, the Neuroquila virus (circa around 1995) was the first (as far as I know) "polymorphing" virus. It created a "sacrificial virus" to "feed" any existing antivirus program on a machine so that while the antivirus was repairing the created virus the real virus could then attack the antivirus, making it, in the future, always retrun a "no virus found" message to the user. Next, as I recall... comes the concept of "nesting" where when you remove one thing another is created as that one is eliminated.
the above are just 2 examples of why I could be getting the results, daily, that I get BUT... I have stopped these programs after just doing an initial run of each and I have, many, many times stopped them short of doing an all out cleaning and I have done many "all out cleanings" (where I run each program multiple times) and there is a large difference in my end performance of the machine. PS... I do this on all 3 of the machines I have running and NO... I am not making money with my computers... I am a 71 year old man who's retired and od this for cheap thrills and to prove I haven't yet lost my sanity... thank you very much.
Sooooo.... I'd like to buy your program... but only if there's a component in it that let's me state how many times each component within it will run before it stops running.... cause sitting here and re-running these programs for over an hour everyday... just to keep my computer operating at a decent speed (2-I.7... 16 GB Mem, 500 GB SSD, 1- I.5 ... 16GB Mem, 500 GB SSD).
What I want is something I can configure to run multiple passes of the different compnents within your software so I can set it and then go do something else while it scours, re-scourts and rescours again as many times as I want it to.
Cool?
UPDATE
Hi.
When I see the mesage in my laptop: " You can upgrade" to 13.0.0.2. Visit our web page.
I go to this web and I download the file that you have there.
I install this file, but I can't have the new version.
Could you guys help me?
Thanks
When I see the mesage in my laptop: " You can upgrade" to 13.0.0.2. Visit our web page.
I go to this web and I download the file that you have there.
I install this file, but I can't have the new version.
Could you guys help me?
Thanks
Intel Graphics Installer Not Prompt Back After Loading For Install
Dear Sir /Madam,
I'm facing Intel Graphics Installer not prompt back after loading for continue install start on version Driver 31.0.101.4644 WHQL. Need some advice what when wrong and how to resolve.
I'm facing Intel Graphics Installer not prompt back after loading for continue install start on version Driver 31.0.101.4644 WHQL. Need some advice what when wrong and how to resolve.
After using Auslogics Boot Speed 13 (Pro) and restaring the Windows, the screen becomes black.
Hi there,
After using Auslogics Boot Speed 13 (Pro) (scan, regedit, clean, regdefrag, disk defrag, window slimmer, internet optimisation) and restaring the Windows, the screen becomes black in a few minutes. It is possble to change open windows by Alt + Tab. Ctr + Alt + Del can recall Task Manager. But the screen is black, it is not possible to see a wallpaper, call Start menu, task bar is invisible as well. Only restart the system helps, can I fix it in another way, please?
Thank you.
Richard.
After using Auslogics Boot Speed 13 (Pro) (scan, regedit, clean, regdefrag, disk defrag, window slimmer, internet optimisation) and restaring the Windows, the screen becomes black in a few minutes. It is possble to change open windows by Alt + Tab. Ctr + Alt + Del can recall Task Manager. But the screen is black, it is not possible to see a wallpaper, call Start menu, task bar is invisible as well. Only restart the system helps, can I fix it in another way, please?
Thank you.
Richard.
Bluetooth driver
When I bought this I ran a scan and was using my wireless mouse after the scan I was unable to use my mouse. Would this software delete my driver if so how would I get it back?
My ETS5 still crashes
My ETS5 still crashes upon opening. Is there some function in the registry cleaner that I have overlooked?
Auslogic 13 update problem
Trying to update the new version from 13.0.0.1 to 13.0.0.2 - updater stating that Auslogic 13 is running and it will shut down program and proceed with update - this goes on and doesn't work
System Tray Icon Never Loads
I recently purchased Auslogics BoostSpeed 12 and I’m running it on Windows 10 VM, the user is a Standard user without any Administrative Privileges. This brings me to the question! Can this Standard user turn on the computer and BoostSpeed 12 loads and runs automatically including scheduled maintenance?
It looks as though all is fine until I restart the computer however, it’s not, the system tray icon never loads until I start the application manually, and before it loads an administrative Password is required. Is this normal and If so is there a workaround?
It looks as though all is fine until I restart the computer however, it’s not, the system tray icon never loads until I start the application manually, and before it loads an administrative Password is required. Is this normal and If so is there a workaround?