376 questions

Server

Ich komme nicht mehr auf mein altes E-Mail Konto, keine verbindung mit dem Server.
43 views
May 09, 2024 at 09:26 AM

Problem mit dem Optimieren in Disk Defrag 11

Ich habe eine Festplattenpartition, in der die Files über den gesamten Bereich verstreut sind, mit großen Lücken dazwischen. Bei Benutzung der Option "Defragmentieren und Optimieren" in der bei Auslogics gekauften Version Disk Defrag 11 steht der Rechner praktisch. Die Optimierung eines einzelnen kleinen Files dauert Minuten. Die Defragmentierung dagegen läuft normal. Da ich die Kaufversion wegen der Optimierungsoption erworben habe, bitte ich um eine Antwort, wie dieser Fehler beseitigt werden kann.
Ich benutze Windows 10, 64 bit.
80 views
Apr 30, 2024 at 01:35 PM

file recovery

I`ve recently done a deep scan with boost speed 13 which resulted in me losing all my download files from the users file. I`ve tried recovery several times using different restore points without any success. I ran advanced recovery software which tells me they have to be saved to another location. Selected drive D but still don`t see them. Is there any way i can recover my downloads with boost speed 13. ?
96 views
Apr 30, 2024 at 03:47 AM

remarque

je ne sais pas si la question est déjà posée ou non, mais voilà ma question.

Je crois que ce sera plus rapide pour l'utilisateur si vous ajoutez un champ de recherche sur le tableau de bord (dashboard) pour acceder plus rapidement à un sous menu du logiciel.
Merci d'avance pour votre réponse.
Mes salutations.
87 views
Apr 27, 2024 at 10:55 AM

Can I download any of your software on trial basis?

Hi,
Presently I am on trial bases using Auslogics Registry Cleaner 10.
My question is simple. Can I download and install any of the software you offer on a trial basis and if yes please tell me how.
I am mostly curious about the computer speed up app version #13...
Thank you kindly-
Jackson
180 views
Apr 12, 2024 at 04:16 PM

deleted files

If I use duplicate file finder and click delete is the original also deleted?
217 views
Apr 03, 2024 at 02:34 PM

Auslogics Driver Updater should I cancel or wait for installation to finish?

I am trying to update my Nvidia GeForce GTX 960 driver via Auslogics Driver Updater and it's taking a very long time to install. I began the process yesterday (29/03/24) at around 7pm and expected it to take a long time to back-up the old driver setting and then download the new driver. I've come back to my computer at 30/03/24 at 1pm and it is still installing.

Should I continue to wait (and if so, for how long) or should I cancel the installation and rollback to the older driver?

I have changed my power setting to High without any permission to go to sleep so the PC has not gone into sleep mode mid-process. I have also shut down most non-critical background processes (Steam, OneDrive, etc) to let Auslogics Driver Updater have as much CPU / RAM as needed.

Thank you
186 views
Mar 30, 2024 at 12:04 PM

Auslogics BoostSpeed が上手く使えません

マイクロソフトのエッジが邪魔をして、「稼働中のプログラムを全てを終了する」という機能が、突然使えなくなって、これを「手動で終了させよ」との文字が出ますが、出来ません。方法をご教示ください。また、何故、今までスムーズに出来ていたのに、何か私が間違えた設定をしてしまったのでしょうか?

impossible de supprimer adobe acrobat cause FullTrustNotifier.exe

bonjour,
Comment supprimer adobe acrobat reader ensachant que lorsque je commence la procedure, il stoppe la uninstall car fullTrustNotifier.exe n'est pas marque comme installé, j'ai pourtant desactive le Adobe genuine notifier dans les services windows, supprimer les cles de registre notifierClient et supprimer manuellement les repertoires, mais je ne peux pas desisntaller depuis l'appli windows des programmes ni meme modifier, corriger, ou installer une autre version.
Toute aide est la bienvenue et le logiciel d'adobe pour nettoyer les mauvaises desinstallation: AdobeAcroCleaner, ne fonctionne pas, il ne repond pas en 10 sec apres le lancement..bref, tout pour plaire
Merci
Cordialement
226 views
Feb 21, 2024 at 05:01 PM

Maintaining Boostspeed

The latest version appears to be 13.0.0.6. Do you intend to maintain this product? as rapidly as things are changing it appears this product is not going to keep up.
193 views
Feb 20, 2024 at 08:38 PM

taskbar\system errors\explorer.exe\overrun in slack based buffer

Since my first question my problem is getting worse. Now I'm unable to open the control panel the shortcut on my desktop disappeared as I tried to open it. Troubleshooter samething. I cant get a lot of things to open anymore. Cant contact Dell, Microsoft, boost speed 13 still works, but for how long? Please help me before I chuck this thing in the garbage
190 views
Feb 12, 2024 at 08:11 AM

Explorer.EXE error code\ taskbar

About a week ago that code popped up with this text attached to it." The system had detected and overrun of slack based buffer in this application." Since then my taskbar has totally disappeared. I looked online and found some fixes, I've tried about 30 of them now and nothing works.. I've gone into the control panel to open the taskbar directly, it will not open.
168 views
Feb 11, 2024 at 06:55 AM

Does this leave adult website traces

So these "rammerhead" links like rammer.rude.li ive been using for accessing anything that is adult and is purported to have privacy becuase its a browser inside your browser that has a different IP to prevent ISP from seeing your activity but it is deteced in adult website traces in privacy of auslogics? is this not really private and is just a false sense of security like incognito?
604 views
Feb 11, 2024 at 03:12 AM

indexação é apagada

Qual a chave que devo desmarcar na hora que faço a limpeza fina do windows com o Bootspeed 13 ? Pois sempre que faço uma limpeza fina profunda eu perco a indexação de arquivos e sou obrigado a dar o comando pra re- indexar, não só os arquivos com0o tambem a indexaçaõ do Outlook. O que acaba me obrigando a comandar uma nova indezação e isso demora muito.
fbaiao@netfb.com.br
160 views
Feb 08, 2024 at 03:39 PM

Auslogics BoostSpeed13

Why can I not remove any brower add-ons (FF, Chrome) through the internet Optimizer? It shows the add-ons but says a setting or synchronization is preventing the process?

Thanks in advance - Scott
163 views
Feb 08, 2024 at 04:42 AM

Proper Clean Up steps for Auslogics BoostSpeed13

Is there / what is the proper order in which to use the many tools for optimization and clean up with Boost13?

Any why is BoostSpeed13 not listed in software subcategory?

Thanks in advance - Scott
179 views
Feb 08, 2024 at 04:39 AM

The version of AMD software is no compatible with your current installed AMD graphics driver.

I have downloaded and installed the latest version of AMD Software Adrenaline Edition 24.1.1 and it worked just fine.

But after the first reboot, all games stopped working and, when I tried to check AMD Software Adrenalin Edition, it says the software is not compatible with the driver.

Then, I have tried the AMD Software Compatibility Tool, that says everything is OK.

After a few uninstalls - with Revo Uninstaller total cleaning - and reinstalls, I'm still trapped in this loop.

So I'm contacting you guys to see if you can help me in this quest.

Thanks in advance.
190 views
Feb 06, 2024 at 04:06 PM

Cubase and low DSP, ISR latency

Hello
I would like to choose best performance and kick off unnecessary apps and perform tweaks
to have best available DPC latency on my computer in order to make music production.
I have applied BootSpeed tweaks, also affinity for my NVidia GPU, uninstall unneeded apps, disable my intel speedstep, choose power plan to make high performance (disable sleeping for devices), I have updated win11, I disabled unused features such as bluetooth, fax and unneeded devices, disabled HPET etc., hw connected as possible - ports verified, more in detail, sfc and dism- processed, ok results, I provide also those steps and my configuration for your opinion on this in order to recommend me additional steps, or what to do more for best possible result in my configuration
I understand, that its a lot of information at once, I just spent time to get this information and collect and I can send my current configuration in order too.

In general, I have question related to DPC latency once I am able to go around 100 microsecs., but not less - the way is, that I have 20-50 microsecs and after some time I go to around 100 (highest dpc exec.time)
I also monitored performance and got ntoskrnl and dxgkrnl/nvlddmkm and ndis with a bit higher numbers caused this.
Focused on drivers, updated and measured, not sure, how to process with better configuration still - I have disabled sleep modes and disable ipv6 etc.
I use 128/256 samples with 24bit/48000Hz for my audio configuration, the same in audio card, same in my Cubase projects and I disabled internal audio card onboarded.

Any your suggestions, where to focus, those are very appreciated to get best performance possibilities for my music production mode.

Thank you in advance
Kind Regards,
Miroslav
178 views
Feb 04, 2024 at 04:54 PM

Google Chrome

je n'arrive plus a faire des recherches sur Chrome c'est très embetant
173 views
Jan 26, 2024 at 11:25 AM

startupmanager

I got an errormessage from startupmanager.exe with a bug-report, see attachment. What to do about it?

I left my laptop idle for a few hours. When I returned this errormessage was in front.
The following applications were open: Excel, Wordpad, Windows Explorer, Chrome, Firefox, WhatsApp, FileZilla.
181 views
Jan 24, 2024 at 10:30 AM

Can I download any of your software on trial basis?

Hi,
Presently I am on trial bases using Auslogics Registry Cleaner 10.
My question is simple. Can I download and install any of the software you offer on a trial basis and if yes please tell me how.
I am mostly curious about the computer speed up app version #13...
Thank you kindly-
Jackson
180 views
Apr 12, 2024 at 04:16 PM

Proper Clean Up steps for Auslogics BoostSpeed13

Is there / what is the proper order in which to use the many tools for optimization and clean up with Boost13?

Any why is BoostSpeed13 not listed in software subcategory?

Thanks in advance - Scott
179 views
Feb 08, 2024 at 04:39 AM

Cubase and low DSP, ISR latency

Hello
I would like to choose best performance and kick off unnecessary apps and perform tweaks
to have best available DPC latency on my computer in order to make music production.
I have applied BootSpeed tweaks, also affinity for my NVidia GPU, uninstall unneeded apps, disable my intel speedstep, choose power plan to make high performance (disable sleeping for devices), I have updated win11, I disabled unused features such as bluetooth, fax and unneeded devices, disabled HPET etc., hw connected as possible - ports verified, more in detail, sfc and dism- processed, ok results, I provide also those steps and my configuration for your opinion on this in order to recommend me additional steps, or what to do more for best possible result in my configuration
I understand, that its a lot of information at once, I just spent time to get this information and collect and I can send my current configuration in order too.

In general, I have question related to DPC latency once I am able to go around 100 microsecs., but not less - the way is, that I have 20-50 microsecs and after some time I go to around 100 (highest dpc exec.time)
I also monitored performance and got ntoskrnl and dxgkrnl/nvlddmkm and ndis with a bit higher numbers caused this.
Focused on drivers, updated and measured, not sure, how to process with better configuration still - I have disabled sleep modes and disable ipv6 etc.
I use 128/256 samples with 24bit/48000Hz for my audio configuration, the same in audio card, same in my Cubase projects and I disabled internal audio card onboarded.

Any your suggestions, where to focus, those are very appreciated to get best performance possibilities for my music production mode.

Thank you in advance
Kind Regards,
Miroslav
178 views
Feb 04, 2024 at 04:54 PM

credit cards

how do i safely remove any credit card details on my PC using auslogics
177 views
Jan 05, 2024 at 03:58 PM

Gostaria de ter

Bom dia!

É possível que a AUSLOGICS adicione ao BoostSpeed algo como o Partition Master, algo que ajude a solucionar problemas mais profundos nos HDDs?
175 views
Jan 17, 2024 at 02:57 PM

Google Chrome

je n'arrive plus a faire des recherches sur Chrome c'est très embetant
173 views
Jan 26, 2024 at 11:25 AM

100 % disc

my disc is at 100% still after i reset everything and updated to windows 11, help.
172 views
Jan 05, 2024 at 03:35 AM

Auslogics BoostSpeed が上手く使えません

マイクロソフトのエッジが邪魔をして、「稼働中のプログラムを全てを終了する」という機能が、突然使えなくなって、これを「手動で終了させよ」との文字が出ますが、出来ません。方法をご教示ください。また、何故、今までスムーズに出来ていたのに、何か私が間違えた設定をしてしまったのでしょうか?

Explorer.EXE error code\ taskbar

About a week ago that code popped up with this text attached to it." The system had detected and overrun of slack based buffer in this application." Since then my taskbar has totally disappeared. I looked online and found some fixes, I've tried about 30 of them now and nothing works.. I've gone into the control panel to open the taskbar directly, it will not open.
168 views
Feb 11, 2024 at 06:55 AM

Adding Subtitle to Movie

I have a mp4 video (movie) file and the corresponding srt (Chinese) subtitle. I want to add the substitle to the movie and save it with the subtitle either selectable (on/off) or permanently embedded. I have tried to follow procedure numerous times but I am missing or misunderstanding something. How do I do it?
165 views
Jan 17, 2024 at 11:30 PM

Auslogics BoostSpeed13

Why can I not remove any brower add-ons (FF, Chrome) through the internet Optimizer? It shows the add-ons but says a setting or synchronization is preventing the process?

Thanks in advance - Scott
163 views
Feb 08, 2024 at 04:42 AM

indexação é apagada

Qual a chave que devo desmarcar na hora que faço a limpeza fina do windows com o Bootspeed 13 ? Pois sempre que faço uma limpeza fina profunda eu perco a indexação de arquivos e sou obrigado a dar o comando pra re- indexar, não só os arquivos com0o tambem a indexaçaõ do Outlook. O que acaba me obrigando a comandar uma nova indezação e isso demora muito.
fbaiao@netfb.com.br
160 views
Feb 08, 2024 at 03:39 PM

file recovery

I`ve recently done a deep scan with boost speed 13 which resulted in me losing all my download files from the users file. I`ve tried recovery several times using different restore points without any success. I ran advanced recovery software which tells me they have to be saved to another location. Selected drive D but still don`t see them. Is there any way i can recover my downloads with boost speed 13. ?
96 views
Apr 30, 2024 at 03:47 AM

remarque

je ne sais pas si la question est déjà posée ou non, mais voilà ma question.

Je crois que ce sera plus rapide pour l'utilisateur si vous ajoutez un champ de recherche sur le tableau de bord (dashboard) pour acceder plus rapidement à un sous menu du logiciel.
Merci d'avance pour votre réponse.
Mes salutations.
87 views
Apr 27, 2024 at 10:55 AM

Problem mit dem Optimieren in Disk Defrag 11

Ich habe eine Festplattenpartition, in der die Files über den gesamten Bereich verstreut sind, mit großen Lücken dazwischen. Bei Benutzung der Option "Defragmentieren und Optimieren" in der bei Auslogics gekauften Version Disk Defrag 11 steht der Rechner praktisch. Die Optimierung eines einzelnen kleinen Files dauert Minuten. Die Defragmentierung dagegen läuft normal. Da ich die Kaufversion wegen der Optimierungsoption erworben habe, bitte ich um eine Antwort, wie dieser Fehler beseitigt werden kann.
Ich benutze Windows 10, 64 bit.
80 views
Apr 30, 2024 at 01:35 PM

Server

Ich komme nicht mehr auf mein altes E-Mail Konto, keine verbindung mit dem Server.
43 views
May 09, 2024 at 09:26 AM