372 questions
Empty folder program freezing up
Hello there. First time asking for assistance. The AB13 Suite works great except for the empty folder program which freezes up on both computers here at the office. Whole program then does. What now? Thanks....
Paul
Paul
Versione Auslogics BoostSpeed 13
Gentile Auslogics, vi chiedo cortesemente se è prevista la possibilità di provare la versione Pro di BoostSpeed anche solo per 24 ore. Grazie e cordiali saluti
BoostSpeed11でスキャン、不具合解決をするとGoogleDriveが終了する
お世話になります。
BoostSpeed11のダッシュボードからスキャン、表示された問題を解決すると、インストールされている「GoogleDrive」が終了します。
割り当ててある仮想ドライブも消え、タスクバーのアイコンも消えてGoogleDriveが機能しません。GoogleDriveの再起動も出来ません。
GoogleDriveが終了した時点でGoogleDriveアプリのプログラム自体は削除されないので、
コントロールパネル、プログラムと機能から削除→再起動→ログイン→再インストールが必要になります。
GoogleDriveのインストールフォルダや関連すると思われるレジストリをスキャン対象から除外しましたが、この問題は解決しません。
何か良い方法があれば教えて下さい。
以上、よろしくお願いします。
BoostSpeed11のダッシュボードからスキャン、表示された問題を解決すると、インストールされている「GoogleDrive」が終了します。
割り当ててある仮想ドライブも消え、タスクバーのアイコンも消えてGoogleDriveが機能しません。GoogleDriveの再起動も出来ません。
GoogleDriveが終了した時点でGoogleDriveアプリのプログラム自体は削除されないので、
コントロールパネル、プログラムと機能から削除→再起動→ログイン→再インストールが必要になります。
GoogleDriveのインストールフォルダや関連すると思われるレジストリをスキャン対象から除外しましたが、この問題は解決しません。
何か良い方法があれば教えて下さい。
以上、よろしくお願いします。
Clearing Privacy History issues
Every day, I start the day, running Advanced System Care, then Glary Utilities, then WiseCare 365, then Auslogics Bootspeed 13, the I reboot and then run ASC again. I have been doing this now, daily, for over 3 years (updating as they are made public). 1st run of ASC... I find privacy issues and then delete them. With Glary's... I run (in Advanced) their "Erase history" under "Privacy" multiple times until I get "Zero" issues found (sometimes up to 15 times to get a zero response). Then I run WiseCare, multipl times (usually around 6 times (main page) and then Under "System Cleaner" I usually only run each section once... sometimes though I run the "Advanced Cleaner" a few times, each time returning a different number of files found and cleaned... but never getting a "zero" found result. NEXT is Auslogics Bootspeed 13 (AB13) I run the main screen, cure the findings... and then I run the "privacy" scan again... and I have done this up to 30 times in a row. The important thing hereis... each time returns a number of files found that is different than the previous time AND there is no pattern to the numbers returned either!
Looking at the past, the Neuroquila virus (circa around 1995) was the first (as far as I know) "polymorphing" virus. It created a "sacrificial virus" to "feed" any existing antivirus program on a machine so that while the antivirus was repairing the created virus the real virus could then attack the antivirus, making it, in the future, always retrun a "no virus found" message to the user. Next, as I recall... comes the concept of "nesting" where when you remove one thing another is created as that one is eliminated.
the above are just 2 examples of why I could be getting the results, daily, that I get BUT... I have stopped these programs after just doing an initial run of each and I have, many, many times stopped them short of doing an all out cleaning and I have done many "all out cleanings" (where I run each program multiple times) and there is a large difference in my end performance of the machine. PS... I do this on all 3 of the machines I have running and NO... I am not making money with my computers... I am a 71 year old man who's retired and od this for cheap thrills and to prove I haven't yet lost my sanity... thank you very much.
Sooooo.... I'd like to buy your program... but only if there's a component in it that let's me state how many times each component within it will run before it stops running.... cause sitting here and re-running these programs for over an hour everyday... just to keep my computer operating at a decent speed (2-I.7... 16 GB Mem, 500 GB SSD, 1- I.5 ... 16GB Mem, 500 GB SSD).
What I want is something I can configure to run multiple passes of the different compnents within your software so I can set it and then go do something else while it scours, re-scourts and rescours again as many times as I want it to.
Cool?
Looking at the past, the Neuroquila virus (circa around 1995) was the first (as far as I know) "polymorphing" virus. It created a "sacrificial virus" to "feed" any existing antivirus program on a machine so that while the antivirus was repairing the created virus the real virus could then attack the antivirus, making it, in the future, always retrun a "no virus found" message to the user. Next, as I recall... comes the concept of "nesting" where when you remove one thing another is created as that one is eliminated.
the above are just 2 examples of why I could be getting the results, daily, that I get BUT... I have stopped these programs after just doing an initial run of each and I have, many, many times stopped them short of doing an all out cleaning and I have done many "all out cleanings" (where I run each program multiple times) and there is a large difference in my end performance of the machine. PS... I do this on all 3 of the machines I have running and NO... I am not making money with my computers... I am a 71 year old man who's retired and od this for cheap thrills and to prove I haven't yet lost my sanity... thank you very much.
Sooooo.... I'd like to buy your program... but only if there's a component in it that let's me state how many times each component within it will run before it stops running.... cause sitting here and re-running these programs for over an hour everyday... just to keep my computer operating at a decent speed (2-I.7... 16 GB Mem, 500 GB SSD, 1- I.5 ... 16GB Mem, 500 GB SSD).
What I want is something I can configure to run multiple passes of the different compnents within your software so I can set it and then go do something else while it scours, re-scourts and rescours again as many times as I want it to.
Cool?
BoostSpeed 13 Ansehen der Ergebnisse
Warum kann ich bei BoostSpeed die Ergebnisse nicht lesen? Sowie ich auf "Die Reparatur abgeschlossen. Klicken Sioe hier um die Ergebnisse anzusehen" drücke, verschwindet alles. Ich konne bishe keine Ergenisse mir ansehen.
Im Voraus vielen Dank!!
Regards Hans
Im Voraus vielen Dank!!
Regards Hans
Licence Auslogics
Bonjour, je suis client chez vous depuis plusieurs années, si je prends la licence pro, aurais je la totalité de votre logiciel avec bien sur la défraguementation des disque SSD? ... Merci pour votre réponse.
Salutations cordiales.
André
Salutations cordiales.
André
BoostSpeed reading errors
On the bottom strip of the main display on BoostSpeed there are alternating displays of some statistics for CPU HDD NET and RAM. All of these consistently show 0%. Why are they not reading?
Also I frequently get a pop-up suggeting I clear my browser cache because it contains anywhere from 23 to 46 TERABYTES of data. This is odd because I have only 3 TB of available storage on this machine.
Also I frequently get a pop-up suggeting I clear my browser cache because it contains anywhere from 23 to 46 TERABYTES of data. This is odd because I have only 3 TB of available storage on this machine.
Where to find the Optimize Tab
In Auslogics Boostpeed 13 the Optimize Tab disappears in Advanced Mode after closing the app and relaunching Boostpeed 13. I tend to forget or cannot find the tool that creates the Optimize Tab. Which tool houses or creates the Optimize Tab?
Defrag external usb drive?
Hello,
How to I use defrag 11 on an external USB drive?
My little dirve appears in Windows 10 but doensn't show up in your defrag software for me.
Thanks,
joshua
How to I use defrag 11 on an external USB drive?
My little dirve appears in Windows 10 but doensn't show up in your defrag software for me.
Thanks,
joshua
Auslogics - Disk Doctor (Repair)
Hello Sir/Madam.
As per an initial scan with the Disk Doctor, it diagnosed having disk errors on my SSD.
For any further analysis, it states that my SSD will be dismounted and locked while it performs its majic.
My questions:
- What are the consequences if the SSD is not remounted onto my Surface computer,
- Is the Disk Doctor a reliable software, or could I be left in a lurch if the SSD is not reconnected to my computer and
- How long could the repair take. I have a 500 GW SSD.
Regards,
Pietro Di Zanno
As per an initial scan with the Disk Doctor, it diagnosed having disk errors on my SSD.
For any further analysis, it states that my SSD will be dismounted and locked while it performs its majic.
My questions:
- What are the consequences if the SSD is not remounted onto my Surface computer,
- Is the Disk Doctor a reliable software, or could I be left in a lurch if the SSD is not reconnected to my computer and
- How long could the repair take. I have a 500 GW SSD.
Regards,
Pietro Di Zanno
Auslogics scans
I have been using Auslogics for seceral years now. My question is how long do the results of a scan last. I have noticed for instance that the internet settings hold goo,. the scan in clean-up are good and then the next day they must be deleted again. Does a reboot erase some of youy clean-up for tha same day? Just curious. Any info would be helpfil. Thanks.
Registry Cleaner
Hallo Auslogics Team ! Ich hatte mir vor Boostspeed 13 Pro den Auslogics Registry Cleaner Professinal gekauft !
Meine Frage...Sind diese beiden Produktversionen identisch bzw.funktionsgleich ?
Würde mich über schnelle Rückmeldung freuen!
Mit freundlichen Grüßen Klaus Ratje
Meine Frage...Sind diese beiden Produktversionen identisch bzw.funktionsgleich ?
Würde mich über schnelle Rückmeldung freuen!
Mit freundlichen Grüßen Klaus Ratje
Disk Defrag 11 - Wipe disk blank area function reports 100%, but doesn't actually finish
I know that wiping a large HD can take time, but it reached 100%, the program never repotred it finished. I let it continue to run nearly 12 hours after it reached the 99-100% point. I couldnt close the program either, so I restarted the PC in order to close the program. Dell Percision T3500, 24GB RAM, 8 core Xeon W3540, Win10 x64 on SSD. Everything else runs well. I'm using the paid version of Disk Defrag 11.
програма блокируется антивирусом
При установке Auslogics
BoostSpeed 12 програма блокируется антивирусом McAfee life Safe
Прорамиа Auslogics BoostSpeed 11 Pro работает.
ОС: Windows 10 . Версия 1703 Сблорка ОС 15063.1382
BoostSpeed 12 програма блокируется антивирусом McAfee life Safe
Прорамиа Auslogics BoostSpeed 11 Pro работает.
ОС: Windows 10 . Версия 1703 Сблорка ОС 15063.1382
TaskManager.exe
I received a high-use resource message that one program was using a significant amount of memory resources, and it was identified as TaskManager.exe. Should I and is there a way to shut this down?
죄송합니다. 하드웨어 질문 가능할까여?
램 점유율이 너무 높아서 질문 드립니다.
사진에 나온거 해봐야 인터넷 창 3개에 녹스 블루스택 1개씩 만 켜져 있는데
16기가 램이 저렇게 사용량이 나오는데 맞나요?
커밋됨 캐시됨이 높아서 이게 맞나 싶기도 합니다
해결법이나 이유를 알 수 있을까요?
Uninstall
I used Windows to uninstall this software. Is there anyway to find out if there was any junk left behind?
Or on any software that has been uninstalled with the Windows Programs.
Or on any software that has been uninstalled with the Windows Programs.
Start Up
AOL Software Problem:
I have AOL Desktop Gold & it worked good for a few years, then when I signed in, the orange ball appeared, and after that, nothing; AOL trtied to fix it, via reinstall but couldn't. Any suggestions?
I have aused Hewlette Packard Desktop PC, was Windows XP Now Windows 7. Petium 4 processor, 2GB Memory
I have AOL Desktop Gold & it worked good for a few years, then when I signed in, the orange ball appeared, and after that, nothing; AOL trtied to fix it, via reinstall but couldn't. Any suggestions?
I have aused Hewlette Packard Desktop PC, was Windows XP Now Windows 7. Petium 4 processor, 2GB Memory
Hirosuke Kajiyama
Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします
License key ライセンスキー:
Auslogics BoostSpeed 12
Content hidden to protect privacy
Site Usage
I use WWW.BERNERS.HIBID.COM weekly but since getting BoostSpeed 12 it won't load. I am getting
THE CONNECTION FOR THIS SITE IS NOT SECURE
USES AN UNSUPPORTED PROTOCAL
ERR.SSL VERIN OR CIPHER.MISMATCH
MY WIFES PC WHICH DOES NOT HAVE bOOSsPEDD RUNS IF FINE
THE CONNECTION FOR THIS SITE IS NOT SECURE
USES AN UNSUPPORTED PROTOCAL
ERR.SSL VERIN OR CIPHER.MISMATCH
MY WIFES PC WHICH DOES NOT HAVE bOOSsPEDD RUNS IF FINE
Долгая загруска игр и текстур в самих играх.
Здравствуйте. Дело в том, что у меня стали долго грузиться игры и графика в самих играх. Хотя компьютер у меня не самый слабый. Но после включения пк все стало долго и грустно.
DNS server
Hi! Thanks for the help! I would like to change my local DNS server to a faster one! I have used Namebench to scan for one but the Auslogics app blocks my upgrade. Can I tempoarily disable Auslogics to change the server or must I uninstall the app then reinstall it after I get a new DNS server? I always do a network scan to set the perameters which does help but it help to get a better DNS! What can I do? Thank You, Craig Stone Jackson Ca.
If I have purchased Boost speed 12, Do I need the registry cleaner product also?
If I have purchased Boost speed 12, Do I need the registry cleaner product also?
Admin. Blocked
When trying to open Boostspeed, I am getting a popup stating Admin Blocked, go to an Administrator Integrator.exe. How can I clear this. If I re-download the basic program will open, when I type in my registration code, I'm sent to the store pager in AOL. Any help with this problem would be appreaciated.
Thank You
James Elder
Thank You
James Elder
EL SISTEMA EN GENERAL TARDA MUCHO EN RESPONDER
el arranque al encender es muy lento ,para abrir archivos tambien tarda mucho asi como navegar en internet
que es lo que se deve hacer.
que es lo que se deve hacer.
Registry
since installing your product my laptop takes 11 minutes to boot, going through my registry and checking errors! How do I deactivate this function?
installing on more than one device
Can I uninstall my licence from one desktop and then re-install on a laptop?
All my products are not working
I have been getting eroor message of a catastrific failure on all of my products, this not good.
Morris Brown
Content hidden to protect privacy
0ne drive
Is there a way i can add my one drive files in to be scanned by the duplicate file finder tool? as 90% of my files/ photos are saved on one drive amd when it scans it doesnt scan it.