372 questions
Empty folder program freezing up
Hello there. First time asking for assistance. The AB13 Suite works great except for the empty folder program which freezes up on both computers here at the office. Whole program then does. What now? Thanks....
Paul
Paul
Versione Auslogics BoostSpeed 13
Gentile Auslogics, vi chiedo cortesemente se è prevista la possibilità di provare la versione Pro di BoostSpeed anche solo per 24 ore. Grazie e cordiali saluti
BoostSpeed11でスキャン、不具合解決をするとGoogleDriveが終了する
お世話になります。
BoostSpeed11のダッシュボードからスキャン、表示された問題を解決すると、インストールされている「GoogleDrive」が終了します。
割り当ててある仮想ドライブも消え、タスクバーのアイコンも消えてGoogleDriveが機能しません。GoogleDriveの再起動も出来ません。
GoogleDriveが終了した時点でGoogleDriveアプリのプログラム自体は削除されないので、
コントロールパネル、プログラムと機能から削除→再起動→ログイン→再インストールが必要になります。
GoogleDriveのインストールフォルダや関連すると思われるレジストリをスキャン対象から除外しましたが、この問題は解決しません。
何か良い方法があれば教えて下さい。
以上、よろしくお願いします。
BoostSpeed11のダッシュボードからスキャン、表示された問題を解決すると、インストールされている「GoogleDrive」が終了します。
割り当ててある仮想ドライブも消え、タスクバーのアイコンも消えてGoogleDriveが機能しません。GoogleDriveの再起動も出来ません。
GoogleDriveが終了した時点でGoogleDriveアプリのプログラム自体は削除されないので、
コントロールパネル、プログラムと機能から削除→再起動→ログイン→再インストールが必要になります。
GoogleDriveのインストールフォルダや関連すると思われるレジストリをスキャン対象から除外しましたが、この問題は解決しません。
何か良い方法があれば教えて下さい。
以上、よろしくお願いします。
Clearing Privacy History issues
Every day, I start the day, running Advanced System Care, then Glary Utilities, then WiseCare 365, then Auslogics Bootspeed 13, the I reboot and then run ASC again. I have been doing this now, daily, for over 3 years (updating as they are made public). 1st run of ASC... I find privacy issues and then delete them. With Glary's... I run (in Advanced) their "Erase history" under "Privacy" multiple times until I get "Zero" issues found (sometimes up to 15 times to get a zero response). Then I run WiseCare, multipl times (usually around 6 times (main page) and then Under "System Cleaner" I usually only run each section once... sometimes though I run the "Advanced Cleaner" a few times, each time returning a different number of files found and cleaned... but never getting a "zero" found result. NEXT is Auslogics Bootspeed 13 (AB13) I run the main screen, cure the findings... and then I run the "privacy" scan again... and I have done this up to 30 times in a row. The important thing hereis... each time returns a number of files found that is different than the previous time AND there is no pattern to the numbers returned either!
Looking at the past, the Neuroquila virus (circa around 1995) was the first (as far as I know) "polymorphing" virus. It created a "sacrificial virus" to "feed" any existing antivirus program on a machine so that while the antivirus was repairing the created virus the real virus could then attack the antivirus, making it, in the future, always retrun a "no virus found" message to the user. Next, as I recall... comes the concept of "nesting" where when you remove one thing another is created as that one is eliminated.
the above are just 2 examples of why I could be getting the results, daily, that I get BUT... I have stopped these programs after just doing an initial run of each and I have, many, many times stopped them short of doing an all out cleaning and I have done many "all out cleanings" (where I run each program multiple times) and there is a large difference in my end performance of the machine. PS... I do this on all 3 of the machines I have running and NO... I am not making money with my computers... I am a 71 year old man who's retired and od this for cheap thrills and to prove I haven't yet lost my sanity... thank you very much.
Sooooo.... I'd like to buy your program... but only if there's a component in it that let's me state how many times each component within it will run before it stops running.... cause sitting here and re-running these programs for over an hour everyday... just to keep my computer operating at a decent speed (2-I.7... 16 GB Mem, 500 GB SSD, 1- I.5 ... 16GB Mem, 500 GB SSD).
What I want is something I can configure to run multiple passes of the different compnents within your software so I can set it and then go do something else while it scours, re-scourts and rescours again as many times as I want it to.
Cool?
Looking at the past, the Neuroquila virus (circa around 1995) was the first (as far as I know) "polymorphing" virus. It created a "sacrificial virus" to "feed" any existing antivirus program on a machine so that while the antivirus was repairing the created virus the real virus could then attack the antivirus, making it, in the future, always retrun a "no virus found" message to the user. Next, as I recall... comes the concept of "nesting" where when you remove one thing another is created as that one is eliminated.
the above are just 2 examples of why I could be getting the results, daily, that I get BUT... I have stopped these programs after just doing an initial run of each and I have, many, many times stopped them short of doing an all out cleaning and I have done many "all out cleanings" (where I run each program multiple times) and there is a large difference in my end performance of the machine. PS... I do this on all 3 of the machines I have running and NO... I am not making money with my computers... I am a 71 year old man who's retired and od this for cheap thrills and to prove I haven't yet lost my sanity... thank you very much.
Sooooo.... I'd like to buy your program... but only if there's a component in it that let's me state how many times each component within it will run before it stops running.... cause sitting here and re-running these programs for over an hour everyday... just to keep my computer operating at a decent speed (2-I.7... 16 GB Mem, 500 GB SSD, 1- I.5 ... 16GB Mem, 500 GB SSD).
What I want is something I can configure to run multiple passes of the different compnents within your software so I can set it and then go do something else while it scours, re-scourts and rescours again as many times as I want it to.
Cool?
BoostSpeed 13 Ansehen der Ergebnisse
Warum kann ich bei BoostSpeed die Ergebnisse nicht lesen? Sowie ich auf "Die Reparatur abgeschlossen. Klicken Sioe hier um die Ergebnisse anzusehen" drücke, verschwindet alles. Ich konne bishe keine Ergenisse mir ansehen.
Im Voraus vielen Dank!!
Regards Hans
Im Voraus vielen Dank!!
Regards Hans
Licence Auslogics
Bonjour, je suis client chez vous depuis plusieurs années, si je prends la licence pro, aurais je la totalité de votre logiciel avec bien sur la défraguementation des disque SSD? ... Merci pour votre réponse.
Salutations cordiales.
André
Salutations cordiales.
André
BoostSpeed reading errors
On the bottom strip of the main display on BoostSpeed there are alternating displays of some statistics for CPU HDD NET and RAM. All of these consistently show 0%. Why are they not reading?
Also I frequently get a pop-up suggeting I clear my browser cache because it contains anywhere from 23 to 46 TERABYTES of data. This is odd because I have only 3 TB of available storage on this machine.
Also I frequently get a pop-up suggeting I clear my browser cache because it contains anywhere from 23 to 46 TERABYTES of data. This is odd because I have only 3 TB of available storage on this machine.
Where to find the Optimize Tab
In Auslogics Boostpeed 13 the Optimize Tab disappears in Advanced Mode after closing the app and relaunching Boostpeed 13. I tend to forget or cannot find the tool that creates the Optimize Tab. Which tool houses or creates the Optimize Tab?
Defrag external usb drive?
Hello,
How to I use defrag 11 on an external USB drive?
My little dirve appears in Windows 10 but doensn't show up in your defrag software for me.
Thanks,
joshua
How to I use defrag 11 on an external USB drive?
My little dirve appears in Windows 10 but doensn't show up in your defrag software for me.
Thanks,
joshua
Auslogics - Disk Doctor (Repair)
Hello Sir/Madam.
As per an initial scan with the Disk Doctor, it diagnosed having disk errors on my SSD.
For any further analysis, it states that my SSD will be dismounted and locked while it performs its majic.
My questions:
- What are the consequences if the SSD is not remounted onto my Surface computer,
- Is the Disk Doctor a reliable software, or could I be left in a lurch if the SSD is not reconnected to my computer and
- How long could the repair take. I have a 500 GW SSD.
Regards,
Pietro Di Zanno
As per an initial scan with the Disk Doctor, it diagnosed having disk errors on my SSD.
For any further analysis, it states that my SSD will be dismounted and locked while it performs its majic.
My questions:
- What are the consequences if the SSD is not remounted onto my Surface computer,
- Is the Disk Doctor a reliable software, or could I be left in a lurch if the SSD is not reconnected to my computer and
- How long could the repair take. I have a 500 GW SSD.
Regards,
Pietro Di Zanno
Auslogics scans
I have been using Auslogics for seceral years now. My question is how long do the results of a scan last. I have noticed for instance that the internet settings hold goo,. the scan in clean-up are good and then the next day they must be deleted again. Does a reboot erase some of youy clean-up for tha same day? Just curious. Any info would be helpfil. Thanks.
Registry Cleaner
Hallo Auslogics Team ! Ich hatte mir vor Boostspeed 13 Pro den Auslogics Registry Cleaner Professinal gekauft !
Meine Frage...Sind diese beiden Produktversionen identisch bzw.funktionsgleich ?
Würde mich über schnelle Rückmeldung freuen!
Mit freundlichen Grüßen Klaus Ratje
Meine Frage...Sind diese beiden Produktversionen identisch bzw.funktionsgleich ?
Würde mich über schnelle Rückmeldung freuen!
Mit freundlichen Grüßen Klaus Ratje
Disk Defrag 11 - Wipe disk blank area function reports 100%, but doesn't actually finish
I know that wiping a large HD can take time, but it reached 100%, the program never repotred it finished. I let it continue to run nearly 12 hours after it reached the 99-100% point. I couldnt close the program either, so I restarted the PC in order to close the program. Dell Percision T3500, 24GB RAM, 8 core Xeon W3540, Win10 x64 on SSD. Everything else runs well. I'm using the paid version of Disk Defrag 11.
Disk Defrag
Buongiorno,
è possibile utilizzare Disk Defrag in modo tale che i file di una cartella specifica siano spostati all'inizio del disco? Si tratta di un disco di soli dati VIDEO, senza APP o Sistema operativo.
Vorrei che i nuovi Video scritti fossero sempre copiati nella parte finale del disco mano a mano che questo viene riempito.
Spero di essere stato chiaro e vi ringrazio per la cortesia
Cordiali saluti
Renato Cesaroni
è possibile utilizzare Disk Defrag in modo tale che i file di una cartella specifica siano spostati all'inizio del disco? Si tratta di un disco di soli dati VIDEO, senza APP o Sistema operativo.
Vorrei che i nuovi Video scritti fossero sempre copiati nella parte finale del disco mano a mano che questo viene riempito.
Spero di essere stato chiaro e vi ringrazio per la cortesia
Cordiali saluti
Renato Cesaroni
Activate Pro Version
Pro Version cannot be activate on Windows 11 insider preview Build 22543.rs_prerelease.220122-2315.
Activating Software Problem
I have now come to the end of my tether with this piece of software. I have been sent a Registration Code because the software I purchased on the 14 Dec 2021 keeps on asking me to Activate Pro Version. I removed the programme from my computer and started afresh. The programme dowloaded and the after putting in my Licence Key it advised me that the programme was registered. However, there is white writing on a green backgroumd in the bottom right hand corner stating: Activate Pro Version (when pressed advises what you get with the Pro version - which I have already purchased!) I have added this as an attachement on an MS Word doc.
Carl Bruce
Content hidden to protect privacy
504 Auslogics files designated as Malware
504 Auslogics file were identified by Malwarebytes as being potential Malware.
How can that be? Does Auslogics provide unsafe software?
Please remedy now!
File attached for your review
How can that be? Does Auslogics provide unsafe software?
Please remedy now!
File attached for your review
Auslogics BoostSpeed 12について
「Auslogics BoostSpeed Pro12」「Auslogics Driver Updater」と「Disk Defrag Ultimate」のボタンがありますが、インストールすると別途、料金が発生するのでしょうか?
Tab Crashes when go to Look at Report from Deep Disk Cleaner
After I run my Auslogics Boostspeed (makes a backup). I go to look at report and get error "Gah. your tab failed" What/Why does this happen? I don't know how to attach the report. Sorry (Old Lady)
Not able to install an upgrade for Boostspeed 12.2.0.0
I am unable to install the upgrade for Boostspeed 12..2.0.0 to 12.2.0.1
After completion of the upgrade software, the Help box remains showing my Version as 12.2.0.0
After completion of the upgrade software, the Help box remains showing my Version as 12.2.0.0
Quanti pc
Buongiorno, un saluto cordiale, ho comperato due versioni pro , la domanda e: a quanti pc posso mettere la licenza adquistata?
pop up for ugrade when I already subscribe to boost 12
I upgraded to Boost12 quicte some time ago and yet I keep getting an annoying popup on my screen to upgrade. I need this to stop and this should not count as one of my questions because it is purely an issue on your end.
Application will not recognize Pro version
Hi there,
I have an active license key and discovered today that the app reverted to the free version. I put in my license key and it notes activation to be successful, however still runs as the free version.
To note: I have been unable to access the app itself without having to go into the administrator Windows account, which is a new finding since today as well. Not sure if that's related.
Any help would be great. Thanks.
John
I have an active license key and discovered today that the app reverted to the free version. I put in my license key and it notes activation to be successful, however still runs as the free version.
To note: I have been unable to access the app itself without having to go into the administrator Windows account, which is a new finding since today as well. Not sure if that's related.
Any help would be great. Thanks.
John
Майкрософт офис
После использования Auslogics перестали открываться файлы ексель хотя вордоские файлы продолжают открываться.
Notifacations
Can we stop the nag notifacations?
I do not need constant reminders that I have 3 questions, now 2. Stop it.
I do not need constant reminders that I have 3 questions, now 2. Stop it.
ホルダーが「空」になる
boostSpeed12を自動起動していますが、本日データを参照しようと、windows(C)とData(D)のデスクの中で、(D)に保存してあるホルダーをクリックすると、「このホルダーは空です」となってどのホルダーもデータが読み取れません。ホルダー名はきちんと表示されています。なぜこんな風になるのでしょうか。復元する方法をご教授してください。
SSD optimization
Hello
I am using SSDs optimization for my SSD drive but I found out on the internet and youtube that I should not defragment my SSD, just let window trim does the work. I would like to know if Auslogic do any good for SSD and is it gonna insert extra "write" to my SSD? If it is the case I would rather use Window trim since I saw SSD optimization also do defragment task when I optimize with Auslogic Bootspeed 12
Best
I am using SSDs optimization for my SSD drive but I found out on the internet and youtube that I should not defragment my SSD, just let window trim does the work. I would like to know if Auslogic do any good for SSD and is it gonna insert extra "write" to my SSD? If it is the case I would rather use Window trim since I saw SSD optimization also do defragment task when I optimize with Auslogic Bootspeed 12
Best
Green Buttons asking to activate pro version
I have the Pro Version. When I click on Help/About the window confirms that. Why to I have a green button on every screen asking me to activate the Pro Version. I even hit the button and it confirms I have the Pro and the green buttons persist. Help.
activation
it is not possible to activate this application with this key
Content hidden to protect privacy
Fences Requires Reentry of Product Code Everytime BoostSpeed Runs
Hi,
I have had Fences for many years. When BoostSpeed runs its weekly maintenance, I must re-enter the Fences Product Key to re-register the product. I do this and Fences works fine again.
This problem occurred several years ago and you provided a fix where BoostSpeed does not delete/address a file required for Fences related to the product key.
Would you please re-send those instructions if that would resolve the issue or advise other solutions to resolve?
Thank you,
Rich Sullivan
I have had Fences for many years. When BoostSpeed runs its weekly maintenance, I must re-enter the Fences Product Key to re-register the product. I do this and Fences works fine again.
This problem occurred several years ago and you provided a fix where BoostSpeed does not delete/address a file required for Fences related to the product key.
Would you please re-send those instructions if that would resolve the issue or advise other solutions to resolve?
Thank you,
Rich Sullivan
Outlook not closing correctly
I have MS 365.
Brand new machine hi end
When I close Outlook it does close OK
But when I reopen in morning I always get message it did not close correctly "Something stopped it form closing" Do I want to restore to previuos". I click yes and it opens
Any ideas. It was reinstalled
Thanx
Brand new machine hi end
When I close Outlook it does close OK
But when I reopen in morning I always get message it did not close correctly "Something stopped it form closing" Do I want to restore to previuos". I click yes and it opens
Any ideas. It was reinstalled
Thanx