375 questions
DRIVER UPDATER REFUSES TO CONNECT
Any idea as to why this is happening? I have registered the program in the WIN firewall, but no success. All other Auslogics software is working without a hitch.
Thanks for your help!
James
Thanks for your help!
James
heute kein Zugang zum Abruf der Treiber-Daten
Gibt es ein technisches Problem beim Zugang zum Datenserver?
Anti-virus
Bonjour !!
J'ai installé CCLEANER mais crains qu'il détruise des fichiers considérés comme étant des virus mais qui n'en sont pas comme par exemple "setup.exe". Windows Defender a complètement détruits des fichiers qui n'étaient en aucun cas des virus. Je n'ai pas réussi à les récupérer.
Dois-je craindre la même chose avec CCLEANER ?
Je vous remercie d'avance pour la réponse que vous voudrez bien me donner ...
Cordialement,
Eric
J'ai installé CCLEANER mais crains qu'il détruise des fichiers considérés comme étant des virus mais qui n'en sont pas comme par exemple "setup.exe". Windows Defender a complètement détruits des fichiers qui n'étaient en aucun cas des virus. Je n'ai pas réussi à les récupérer.
Dois-je craindre la même chose avec CCLEANER ?
Je vous remercie d'avance pour la réponse que vous voudrez bien me donner ...
Cordialement,
Eric
Fehlermeldung
Hallo,
Leider kann ich keine Software mit dem Programm mehr aktuallisieren es kommt immer dieselbe Fehlermeldung:
failed download failure
was verhindert die Aktuallisierung bei dem Programm.
Als Virus Programm nutze ich Kaspersky
Als Betriebssystem nutze ich Windows 10 Pro
mfg Klaus Schwabe
Leider kann ich keine Software mit dem Programm mehr aktuallisieren es kommt immer dieselbe Fehlermeldung:
failed download failure
was verhindert die Aktuallisierung bei dem Programm.
Als Virus Programm nutze ich Kaspersky
Als Betriebssystem nutze ich Windows 10 Pro
mfg Klaus Schwabe
Intel Graphics Installer Not Prompt Back After Loading For Install
Dear Sir /Madam,
I'm facing Intel Graphics Installer not prompt back after loading for continue install start on version Driver 31.0.101.4644 WHQL. Need some advice what when wrong and how to resolve.
I'm facing Intel Graphics Installer not prompt back after loading for continue install start on version Driver 31.0.101.4644 WHQL. Need some advice what when wrong and how to resolve.
fenetre d'erreur dans messagerie
Bonjour,
Ma messagerie Thunderbird (plusieurs comptes actifs) semble fonctionner correctement, mais depuis quelques semaines s'ouvre une fenêtre d'erreur (en pièce jointe) dont je n'arrive pas à supprimer la cause.
Pourriez-vous m'aider ?
Merci d'avance, cordialement.
Denis LO JACOMO
Ma messagerie Thunderbird (plusieurs comptes actifs) semble fonctionner correctement, mais depuis quelques semaines s'ouvre une fenêtre d'erreur (en pièce jointe) dont je n'arrive pas à supprimer la cause.
Pourriez-vous m'aider ?
Merci d'avance, cordialement.
Denis LO JACOMO
After using Auslogics Boot Speed 13 (Pro) and restaring the Windows, the screen becomes black.
Hi there,
After using Auslogics Boot Speed 13 (Pro) (scan, regedit, clean, regdefrag, disk defrag, window slimmer, internet optimisation) and restaring the Windows, the screen becomes black in a few minutes. It is possble to change open windows by Alt + Tab. Ctr + Alt + Del can recall Task Manager. But the screen is black, it is not possible to see a wallpaper, call Start menu, task bar is invisible as well. Only restart the system helps, can I fix it in another way, please?
Thank you.
Richard.
After using Auslogics Boot Speed 13 (Pro) (scan, regedit, clean, regdefrag, disk defrag, window slimmer, internet optimisation) and restaring the Windows, the screen becomes black in a few minutes. It is possble to change open windows by Alt + Tab. Ctr + Alt + Del can recall Task Manager. But the screen is black, it is not possible to see a wallpaper, call Start menu, task bar is invisible as well. Only restart the system helps, can I fix it in another way, please?
Thank you.
Richard.
Looking For a Software Replacement
I am looking for software that will replace at least all of the features of McAfe Life Sale and some. Do you have a software program(s) that will do this and if so what are they and how much do they cost?
Auslogics Bitreplica vs
Dear Auslogics Team,
Please, tell me: can I use Auslogics Bitreplica to create the full system and disk images?
Thank you.
With regards.
Richard.
Please, tell me: can I use Auslogics Bitreplica to create the full system and disk images?
Thank you.
With regards.
Richard.
Intergrate software/APPS
I have 2 dictionary appsw on my comp[uter/desktop. But I can't seem to get them on WORD, a microsoft program. Do I have to add them as an ADD-ON?
Gerenciador de dispositivos
Quria programar a hora da luminusidade do écran mas não consigo, poderá ter sido da desfragmentação?
Boost speed upgrade to 13
HI
I can not finde where to put in the my license key for the new upgrade to 13. I do hve the new license key it downloaded okay
I can not finde where to put in the my license key for the new upgrade to 13. I do hve the new license key it downloaded okay
Registry Defrag
I am being bombarded to upgrade this software but there is this error message that keeps coming upand the Defrag process is never completed. Error:;- 21470244894. Task Schudeler. ERROR Code 0x8007002
ERROR Save Task (the system cannot find te file specified)
ERROR Save Task (the system cannot find te file specified)
Rregister Editor
Why is your software allready more then 4 hours busy scanning my registry. The first 1200 entries went quick but after that things are slowing down. I have 12.186 registry keys
Disk Defrag
HI,i have noticed a few times now that when all disks are checked my C; SSD disk gets stuck at around 71% and doesnt complete.All other SSD: ( D; E; ) finish. Even then when i stop the optimisation and uncheck disks E and D then try running just C; it still gets stuck. The only way then is to restart my PC and run optimisation only on C; it finishes the run. Its only a small hick up but i thought it best to make you aware of this/
SSD optimization for a whole day
Hello
I am using SSD optimization with Auslogic Bootspeed 12 to optimize my C drive (114 GB free 54 gb) it took a whole day to finish. Is it normal for a ssd optimization running? (while it only took 5 mins to optimize my D drive 98GB free 54GB). How frequently should I run SSD optimization
I am using SSD optimization with Auslogic Bootspeed 12 to optimize my C drive (114 GB free 54 gb) it took a whole day to finish. Is it normal for a ssd optimization running? (while it only took 5 mins to optimize my D drive 98GB free 54GB). How frequently should I run SSD optimization
recovery of duplicate files accidentaly removed
I have removed duplicate files using the software, unfortunately i lost many RAW files of the photographs instead of JPEG versions of the RAW files, I wish to recover my raw files which was deleted first from the hard drive into the recycle bin and removed from there, the RAW files are Nikon NEF files. I am enclsong the JPEG of the RAW file which was deleted, many other RAW files were also lost accidentally ,
ripristino funzionamento IRDA
Buonasera
per un breve periodo con windows 10 ha funzionato l'IRDA (infrarosso) che uso per scaricare i dati di un vecchio cardiofrequenzimetro dopo un aggiornamento l'IRDA non ha più funzionato e nonostante le ricerche su internet per la risoluzione del problema e l'applicazione dei parametri consigliati sempre su internet la mia pennetta IRDA non funziona. Sapete, per cortesia, indicarmi un modo per ripristinare il funzionamento dell'IRDA?.
Ringrazio per la gentile attenzione bisegna tonino
windows 10
Hi, when cleaning up windows 10 by using boostspeed 12, it deletes all my downloaded files and videos ! how to resolve or avoid this ??? Thanks in advance
L Lantveld
L Lantveld
Register errors
I just purchased BoostSpeed 12 and installed, but errords pop when I try to enter my license key. I'm going to attempt to uninstall and reinstall in the meantime.
Gah. Cannot access Report
I have not been able to view any of the reports in the Auslogics software. I just get a blank window in Foxfire.
Integrator.exe wird blockiert
Beim Versuch, Boost Speed von der Taskleiste aus zu öffnen, erscheint folgende Mitteilung:
"Diese App wurde aus Sicherheitsgründen blockiert.
Ein Administrator hat die Ausführung dieser App blockiert
Weitere Informationen erhalten Sie vom Administrator.
Integrator.exe"
Ich bin selbst der Administrator meines Systems, sehe aber keine Möglichkeit, den Fehler zu beheben.
Bitte helfen Sie mir.
"Diese App wurde aus Sicherheitsgründen blockiert.
Ein Administrator hat die Ausführung dieser App blockiert
Weitere Informationen erhalten Sie vom Administrator.
Integrator.exe"
Ich bin selbst der Administrator meines Systems, sehe aber keine Möglichkeit, den Fehler zu beheben.
Bitte helfen Sie mir.
Notifications
I use Bitdefender VPN for anonomous web usage on my Windows 10 desktop computer. I connect to the internet using a USB wifi adapter. Last week the program updated. Now everytime I connect I get a message from BoostSpeed 12 about an attempt to change DNS detected. The next line states- Adapter:TAP Windows Adapter v9. The next line states-Value: 198.51.100.1
How do I stop getting this particular notification without stopping all notifications?
Thanks
T. Kinstler
mitland@aim.com
How do I stop getting this particular notification without stopping all notifications?
Thanks
T. Kinstler
mitland@aim.com
Boostspeed lost Pro licence
I have a Pro licence for Boostspeed and for Malware but both appear to be disabled. If I try to activate the program and enter the activation key I initially get a message saying that the program is registered. However it isn't and the the status is still to upgarde or acivate Pro.
If I close the program completely and try to re-run I get a message saying that the administrator is blocking me via integrator.exe,
however I am the administrator.
Hope you can help.
If I close the program completely and try to re-run I get a message saying that the administrator is blocking me via integrator.exe,
however I am the administrator.
Hope you can help.
pictures
After installing BOOTSPEED 12 and doinG a full scan THE PICTURES IN MY PICTURE FOLDER VANISHED FROM MYCOMPUTER
any idea were can I find them
Local disk (c)>users>cocon>Pictures (folders are empty)
any idea were can I find them
Local disk (c)>users>cocon>Pictures (folders are empty)
Making best use of the high system resource usage detected warning
Boostspeed regularly gives me a warning message, "high system resource usage detected." What should I do to most usefully take advantage of this warning?
pro version
I purchased boot speed pro #
Content hidden to protect privacy
but the program is asking me to activate pro version. Why is this happening? What should I do.Ads
I have ads turned OFF in General settings, however an ad pops up everytime after a defrag is completed wanting me to purchase Boostspeed 12. An ad also pops up when I open the program. How do I get rid of these ads since I have purchased this pro version?
They are very annoying and they cover up my scan results after defrag is completed.
Note: I have also turned off all tray notifications in General Settings and I am still getting these pop ups. Please fix.
Thank you
They are very annoying and they cover up my scan results after defrag is completed.
Note: I have also turned off all tray notifications in General Settings and I am still getting these pop ups. Please fix.
Thank you
register Problem of the Auslogic boot speed pro12
Hello, I hope you are well.
I had aready register the code the i got the email after paid for it.
and when i check programe registertion its show this programe is registed. but I can not use it as the pro version.
it is still have the Activate pro Version button on the down right side.
Please help.....
I had aready register the code the i got the email after paid for it.
and when i check programe registertion its show this programe is registed. but I can not use it as the pro version.
it is still have the Activate pro Version button on the down right side.
Please help.....
PROバージョンを有効にするについて
常に” PROバージョンを有効にする ”が表示され、 PROバージョンでは無いようです、入るにはどうしますか？
ライセンスコードは購入しています、コードを入力すると、畝に " GING ”のHPに入ります、なにかインプットが入りますか？
Auslogics BootSpeed 12 でアイコンからソフトに入ろうとすれうと、” このアプリは保護のためブロックされました ”と表示され入れません。
ブロックを除去する方法を教えて下さい
ライセンスコードは購入しています、コードを入力すると、畝に " GING ”のHPに入ります、なにかインプットが入りますか？
Auslogics BootSpeed 12 でアイコンからソフトに入ろうとすれうと、” このアプリは保護のためブロックされました ”と表示され入れません。
ブロックを除去する方法を教えて下さい
Auslogic Defrag Issue
Defrag hung up on file C:\$Extend\$UsnJml:$J
Went from 3.8% to 13.30% completed and took over 22 hours as you can see in the screenshot attachment.
How can I get defrag around this issue so it can complete the optimization?
Thank you
Dennis Miller
Content hidden to protect privacy
P.S. Why isn't Auslogics a subcategory option?
windows search
I have given automatic duties to boostspeed and it keeps deactivate or destroy my window search which i need. Jow can i stop this?
Product will not activate
I've entered the product key now 3 times. each time it is accepted. when I go to run the 1st scan I see on the bottem right corner of the screen that boostspeed stills needs to be registered and then I reseive unexpected error. I just updated to 12 for my client - Produce key -
Content hidden to protect privacy
Recommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7