My Scanner
I ran My Scanner 5 times and there still something to fix. It is like this all the time, is there something I should do before I scan?
I am including a screen catched.
Settings
The last two times now that I Have used the "Protect" feature. All of my saved log ins have been deleted. I've had to go to the rescue center, and restore the stuff that was done. I need to know how to properly configure the settins so this does not happen again.
Where can I go to initiate cache clearing?
Occasionally it pops up. But if I wish to initiate when it has not popped up? Where do I go.
Thank you.
BoostSpeed Pro Version
Hello Sir,
My question is whether the software Auslogics Registry Cleaner 9 is not already included in the software BoostSpeed in its Pro Version. I will have to purchase and register both softwares? The BoostSpeed Pro Version will not be enough to bring my PC the best performance?
Thanks
Compare configuration changes in boostspeed
I have your software in three computers as the license allows, but I can't find how to compare configuration between them, specially in the custom scan and clean for boostspeed. For example in one computer my login screen still shows the photo microsoft chooses, but on the other it doesn't. Maybe you have that in a config or xml file. It may be good to be able to compare.
Regards,
Paul
Running a scan
When I run a scan to clear disk space it always gets stuck at the same point for 30 - 45 minutes.
Unused application files
C\windows\software distribution\datastore\logs\edbtmp.log
Could you help me resolve pleaase.
If the internet is cut off around the world
how offline activation future / BOOSTSPEED 12 PRO / key /
Глубокая очистка файлов
Здравствуйте! После выполнения глубокой очистки файлов перестало работать стандартное приложение Windows "Кино и ТВ". Исчез exe-файл - 0 байт. Прошу учесть при подготовке обновления BoostSpeed 12, а также подсказать - как востановить приложение "Кино и ТВ"?
С уважением,
Виктор Оплеснин
Must re-enter product code in Fences after weekly scheduled maintenance
Hello,
Boostspeed runs every Sunday morning as part of scheduled maintenance I set-up. After it runs, I am prompted to re-enter my product key for Fences. I do this and Fences works fine. This is a nuicance though as I should not need to do this - the Fences registration is valid. Given the timing is consistent, I am assuming Boostpeed is causing this issue.
Several weeks ago, I did exempt my Anti-Virus software from scanning the Fences folder which contains the registration certificate. However, the prompts continue.
If Boostspeed is indeed causing this issue, is there a way to have it avoid removing/maninpulating the registration of this software so I don't have to re-enter the product code weekly?
Attached is the dialogue box that appears requesting to re-enter the product key.
Thanks,
Rich Sullivan
Корректировка
Привет! У меня вопрос по программе Ausjogics BoostSpeed. Дело в том, что при каждом новом запуске загружается рекламное окно с предложением дополнить вашими прграммными продуктами мою систему. Это окно сжирает много ресурсов системы, что приводит к зависанию и потере времени, значительной потере. Как можно отключить данное окно? Ведь то , что меня интересовало, я уже приобрёл. Не хотелось бы получать разочарование от вашей продукции.
С уважением, Алексей.
Remote Desktop Service
Where can I disable inside BoostSpeed 12 to not disable the Remote Desktop Service? Each time I reboot my PC I loose the ability to remote to my PC at the office because the service is disabled.
BootSpeed 12 installation software
I just bought an additional laptop can I use my paid subscription and install it in my computer
Where is my software
Hi
I have used your software for years now.
I purchased new copies of Boostpeed and DriverUpdater
I don't have driverupdater on my computer just the web version
The webversion caused my windows not to reboot
I've had to re install everything
I would like to run driver updater but do not trust it without some sort of supervision
Can't go through this again
Registering all my purchases over again
Some still aren't working
Thank you
Thomas Horricks
BoostSpeed Pro Version
Hello Sir,
My question is whether the software Auslogics Registry Cleaner 9 is not already included in the software BoostSpeed in its Pro Version. I will have to purchase and register both softwares? The BoostSpeed Pro Version will not be enough to bring my PC the best performance?
Thanks
slow computer.
hello, im valeri i have to ask why is my computer slow? pls send me the answer
i have to thank this program for helping me and i rly would like if this progarm helps me more
thank u -valeri
make simple
this is too mucj tab in software
Dashboard
Once clikc scanner
cleanup
optimize,protect and so on. huh i am officer i have not 01 hour to go thorugh each, please make menu and userinterface like AVG PC Tune Up, iolo system mechanic, Norton antivirus etc. its easy,
Please do some hard work,
Несовместимость Auslogic BootSpeed 11 и противовирусных программ:ESET Internet Security версии 12.2, Dr.Web
Установленная у меня лицензионная программа Auslogic BootSpeed 11 постоянно конфликтует с программой ESET Internet Security версии 12.2, а программа Dr.Web Curelt! просто удаляет Auslogic BootSpeed 11, как несущую угрозу компьютеру (вирусная угроза!). Прошу Вас разовбраться в этой проблеме. С уважением, Шишков Руслан Владимирович
VPN FortiClient
I must use FortiClient VPN to work and communicate with one of my jobs, at Southern Cross University, (SCU). Until yesterday it worked fine.
I have just installed the lastest version in an attempt to resolve the non-connection issue.
Is there a setting in Auslogics BoostSpeed that might affect that VPN?
Any suggestions.
I run BoostSpeed and just accept whatever 'fixes' it suggests, the default or automatic, as I am not wise enough to adjust anything myself.
Could doing that have broken something or blocked the VPN?
I am nervous that Auslogics-Boostspeed is being over active in cleansing my system, of things that I actually need to maintain, like the Forticleint VPN. Firewall settings area mystery to me. I dont change them because I do not know what I am doing.
Latest BoostSpeed Version
This is becomming annoying. I keep getting alerted that a new version of BoostSpeed is available. I've downloaded 12.0.0.2 and ran the installation which prompts that it is removing with re-start and then I have to manually install the latest download. After three successful runs with this I still end up with version 12.0.0.1 What gives?
Temperature raises very high when using Boostspeed 12
I used Boostspeed 11 for some time and never had temperature issues, after de Boostpeed 12 upgrade I noticed that the fan started to make annoying noises and checked the temperature of my Laptop with the Core Temp 1.16 program which says the temp goes above 90 degrees Celsius.
Tried to install 12 again with no result.
Now back to 11 again and the temperature is normal again.
My question is this a normal behaviour of the 12 version of boostspeed?
Auslogics Shell Extensions and Startup
I recently looked into the Auslogics Startup Manager and Shell Extensions and I was alarmed to discover that 2 programs are listed as Dangerous. I have checked the web which lists these 2 program as 58% malicious. The programs relate to the Motherboard hardware installation. They are ASUS.com and atkexComSvc.exe. According to the various web sites the way to remove them is to go to Control Panel Programs and Features and to uninstall. But on my configuration they are not listed in the program list. Auslogics reports them as Dangerous. How do I use Auslogics to disable/remove/unistall?
Transferring Speed Boost, Defrag and Registry Cleaner to new computer
Need to do a clean reinstall of the operating system. Do I need to uninstall products before doing this.
AUSOLOGICS 12 UPDATE NOTIFCATION
Dear Support, I have Auslogics Boostspeed 12 on my machine. There was a flash on the screen of 12.2.0.0 a recommended update.
So my question is there was nothing in that flash update telling me if its a to pay for update or for free. This need to be shown in my book. Do you see where I am coming from with this? It shows what the big fixes are with the new update but yet nothing about if you hit the link if there is a small payment involved. This needs to be incorporated as part of any firmware update in my book. Regards Paul
boostpeed 11
I've uninstalled and reinstalled boostpeed 11 four times now. Is there a bug on the task scheduler. it's kee[s crashing the program. and I have to manually start the maintenanace daily now.
BoostSpeed 12 deleting my Spotify playlist files
EWhy does every time i run the BoostSpeed 12 scan it deletes all of my Spotify downloaded playlist files?
Blue Screen
When ever I try to update any Auslogics software to the latest version, I get a blue screen error on my laptop. This happened earlier with Auslogics Registry Defrag and now happening with Auslogics BoostSpeed.
I have to end up uninstalling and reinstalling the software.
A solution to this problem will be appreciated.
Suggestion to mute certain notifications
I have an anti-virus program that always run and notified by Boostspeed (an item just added into.... start-up), "C:\Program Files\Bitdefender\Bitdefender 2017\bdagent.exe" , in the Registry/run of the Startup Manager. How can I mute this particular notification from poping up? It is too frequent.
I suggest an exception based notification where we can right-click a particular line in the Startup Manager to mute the message, but still allow it to execute (on startup).
thank you, hoping this feature will still be in version 12.
By-the-way, I could not find "Bitdefender" in the subcategory drop down list for this subject.
Upgrade to BoostSpeed 11
I paid for this software before it went to version 11. Now that it updated to 11 I have to purchase it again?
Skipped traces
Lanovo with windows 10
Just upgraded to latest BoostSpeed 11 and have a problem I NEVER had with the precious version ~ 245 traces in the broswer SKIPPED! Made repeated attempts, alwys 245 skipped! Not good!-
PS, forcing a "Subcatagory" selrection makes ZERO sense. the categoriars are inane!