I hated too waste a question, I'm running version 22.214.171.124.
When i try to update to newer version 126.96.36.199 the screen blinks off and then back on.
I have tried the two arrows lower rignt corner only blinks and returns to same window i'm on.
When i go too tools and use the update button i geet the same result, flash on screen and back to same screen.
Один и тот же ключ ЭЦП (Электронная цифровая подпись) на флеш-памяти с одного компьютера считывается и подписывает документы без ошибок, а со второго - нет, Выдает ошибку о невозможности использования или сертификат поврежден. Главное - до чистки компьютера программой Auslogics BoostSpeed 12 ключ без ошибок подписывал документы и со второго компьютера. Вопрос, что мог изменить или удалить Auslogics BoostSpeed 12 в компьютера, то перестал корректно работать ЭЦП (Электронная цифровая подпись).
Какую службу или какие настройки в Windows 10 надо изменить, чтобы Электронная цифровая подпись работала со второго компьютера и подписывала документы? Спасибо!!!
Здравствуйте! Программа Startup Manager выдала информацию, которую я Вам направляю в прилагаемом скриншоте. Вопрос по программе Orphaned SecurityHealth из раздела Реестр/запустить.
По имеющейся информации, производитель программы - неизвестен, рейтинг - неизвестен, существует - нет. Смотрел в интернете, нашел только описание о SecurityHealth, для которой все указанные выше характеристики указаны. Что это за программа у меня в операционной системе? Нужна ли она?
Hi. When i go into empty folder cleaner it will find; i.e *582 empty folders, i press delete, and when its finished it says 520 empty folders found and deleted 258 of them. They go to the recycle bin, which i then empty, but when i do a re-search for empty folders they are all back again. It never actually clears the whole amounts found. *These are the actual readings of my last scan, but the numbers are very close to what they are with every scan. Can you help please? Clive
Dear Support, I have Auslogics Boostspeed 12 on my machine. There was a flash on the screen of 188.8.131.52 a recommended update.
So my question is there was nothing in that flash update telling me if its a to pay for update or for free. This need to be shown in my book. Do you see where I am coming from with this? It shows what the big fixes are with the new update but yet nothing about if you hit the link if there is a small payment involved. This needs to be incorporated as part of any firmware update in my book. Regards Paul
I purchased Disk Defrag, and later purchased Boostspeed. Under Boostspeed Disk Defrag I have always been able to Defrag & Optimize. I always run Defrag first (after disk cleanup), then I run Defrag & Optimize. I run these every Monday morning. I use about 19% of my 1T hard disk space. The only other programs are the automatically scheduled startup programs with staggered start delays up to 2 hours, so they should not significantly affect Defrag & Optimize.
Until 2 months ago, the longest Defrag & Optimze ran in 45 minutes or less. The maximum optimized files was about 45,000. When the Microsoft Windows update for June was implemented, the Defrag & Optimize ran over 3 hours. 2 days ago Defrag & Optimize ran for 5 hours 26 minutes with about 64,000 files optimized. The previous Defrag & Optimize was 6 days earlier.
I am a retired college educated computer professional (with all titles from programmer through analyst and manager) with over 40 years of experience. I have defragged computers for well over 25 years.
My question is "why is the Defrag & Optimize running so long and what can I do to speed it up?".
1 . There was NO Sucategory that matched my Question so I picked 3D Builder <-- ignore please.
This morning was the second time that my laptop was taken over by a “disk repair” function that I think is linked with BoostSpeed. I start up my laptop and something begins churning away telling me that it will take 8 hours to complete. Actually it could not tell time correctly because it took 3 ½ hours before I could use the laptop.
Q: How to prevent this happening again? At least giving me the option to say OK do it now or wait?
It seems each time Boostspeed runs, I have to reload Corel Shop 2020 because it will not statr. I thought this might be a corel problem because the same thing was happening with the previous version.
However, the issue is happing with the 2020 version.
There miust be some issue with the files that BoostSpeed is negating.
Boostspeed runs every Sunday morning as part of scheduled maintenance I set-up. After it runs, I am prompted to re-enter my product key for Fences. I do this and Fences works fine. This is a nuicance though as I should not need to do this - the Fences registration is valid. Given the timing is consistent, I am assuming Boostpeed is causing this issue.
Several weeks ago, I did exempt my Anti-Virus software from scanning the Fences folder which contains the registration certificate. However, the prompts continue.
If Boostspeed is indeed causing this issue, is there a way to have it avoid removing/maninpulating the registration of this software so I don't have to re-enter the product code weekly?
Attached is the dialogue box that appears requesting to re-enter the product key.
I have used your software for years now.
I purchased new copies of Boostpeed and DriverUpdater
I don't have driverupdater on my computer just the web version
The webversion caused my windows not to reboot
I've had to re install everything
I would like to run driver updater but do not trust it without some sort of supervision
Can't go through this again
Registering all my purchases over again
Some still aren't working
in 2015 I've purchased the Auslogics BoostSpeed 7 Premium and shortly was released a update and the software after update asked to be paid again which I've consider to be a unfair practice.
I am asking to provide me the posibility to install the software that I've purchased since at this moment in not possible to download the software from internet.