941 questions
Dasboard SCAN cannot terminate CHROME.EXE
After running a SCAN, and choosing to resolve the issues that were found, BoostSpeed 13 is unable to terminate Chrome.exe.
In the list of termination failures there are several instance of Chrome.exe
Choosing IGNORE allows me to bypass the panel.
Boostspeed 13 is current with all maintenance
In the list of termination failures there are several instance of Chrome.exe
Choosing IGNORE allows me to bypass the panel.
Boostspeed 13 is current with all maintenance
RE: Need browser attachment advice
I Can't upload files to websites using any browser on my windows 10 home edition.
Can you help me?
despues de suspender, arranca con TEMP
Puse mi desktop en modo SUSPENDER. y ahora arranca con un perfil TEM, como soluciono??
Boostspeed 13 startup externalized to Windows desktop every boot
Everytime I boot up my Windows 10 laptop, Boostspeed 13 i set to startup in the settings, however on each boot, the Boostspeed dashboard is extranalized to the Windows desktop and always at the Registry Analysis tab.
How can I stop the Boostspeed dashboard from being extranalized on every boot-up?
How can I stop the Boostspeed dashboard from being extranalized on every boot-up?
Spinner GIF Keeps Spinning on Some Websites
Whenever I go to a site that requires some time to load, e.g., http://www.fpcanada.ca/findaplanner
I keep seeing the spinnning GIF wheel as I wait for the web page to load, which it does not and then times out..
So far, it happens with Edge, Google, and Firefox. I have restarted several times and have cleared the cache, flushed DNS, reset the browsers, completed a deep clean, registry clean, and optimized internet settings with SpeedBoost, run two anti-virus malware programs (Windows Secuity and Malware Bytes), and have run memory diagnostics. All with the same result - no change.
Windows and the browsers are all up-to-date.
When I inspect the Javascript (>by right-clicking on the Spinner), I see that the Spinner is there and seems to be waiting.
Any suggestions?
I keep seeing the spinnning GIF wheel as I wait for the web page to load, which it does not and then times out..
So far, it happens with Edge, Google, and Firefox. I have restarted several times and have cleared the cache, flushed DNS, reset the browsers, completed a deep clean, registry clean, and optimized internet settings with SpeedBoost, run two anti-virus malware programs (Windows Secuity and Malware Bytes), and have run memory diagnostics. All with the same result - no change.
Windows and the browsers are all up-to-date.
When I inspect the Javascript (>by right-clicking on the Spinner), I see that the Spinner is there and seems to be waiting.
Any suggestions?
Annoying Windows Pop Up Notification
A few months ago, it started to show up an annoying Windows pop up message stating that my laptop (Lenovo, Windows 10) needs DirectPlay feature. I don't even know what is DirectPlay neither what is used for. The message displays two options: install or skip installation of DirectPlay. No matter what I choose it keeps showing up every time I turn on my laptop.
my question is: how can I get rid of this annoying pop up Windows notification?
my question is: how can I get rid of this annoying pop up Windows notification?
Memory Insufficient
I am running Auslogics Disk Defrag 11 on a Windows 2012 R2 server.
Version 11.0.0.2
Full Version (PRO)
I have two drives I am trying to defrag. It used to work but now I am getting "Memory insufficient to perform this operation"
The drives are large:
R drive 83 TB - 19 TB free
S drive 40 TB - 18 TB free
It has 128 GB of memory
Page file is set set to automatic
I have a similar server and it does not have any issues.
Any settings or suggestions I could try.
I have been running Auslogic for about a year with no problem but since the last update I started having this problem on this one server.
Version 11.0.0.2
Full Version (PRO)
I have two drives I am trying to defrag. It used to work but now I am getting "Memory insufficient to perform this operation"
The drives are large:
R drive 83 TB - 19 TB free
S drive 40 TB - 18 TB free
It has 128 GB of memory
Page file is set set to automatic
I have a similar server and it does not have any issues.
Any settings or suggestions I could try.
I have been running Auslogic for about a year with no problem but since the last update I started having this problem on this one server.
Drive local do Windows C:
I have on disk C: With 166 GB, the Windows 11 operating system and I just want the drive C: for Windows. In recent days it has been full and does not allow me to manage the available space, as it has free only 1.6 GB and honestly I do not know how to reduce files in C: which I find too risky because I can collapse the system. What was at risk of happening today. I ask: can you help me? Thanks
Manuel Araújo
Manuel Araújo
fichiers très très longs (240-250 caractères)
Solution pour les supprimer ils sont souvent dans USERS et/où windows 11
Moving the $HOME$ Folder to amother drive
1. I regularily reinstall my system and need to move the system directories to another location.
2. I have an application that is looking to install a directory on the $HOME$ directory - currently this is on my C Drive and I need to move it to the D Drive.
I am looking for a script that will change the $HOME$ folder to the D Drive.
Please an you help I currently use windows 10 but will eventually be upgrading to windows 11
2. I have an application that is looking to install a directory on the $HOME$ directory - currently this is on my C Drive and I need to move it to the D Drive.
I am looking for a script that will change the $HOME$ folder to the D Drive.
Please an you help I currently use windows 10 but will eventually be upgrading to windows 11
file explorer
since my updates yesterday file explorer has stopped working
I tried to reset using a previous reset point but that did not work
I tried to reset using a previous reset point but that did not work
Right mouse click or Double click slow respond
when I Right mouse click or Double click on a file it takes almost 90 second to 2 minutes to respond in window explorer
APPLICFAZIONI DISINSTALLATE
Vorrei eliminare i collgamenti dal menù start di applicazioni disinstallate in precedenza.
Come posso fare
Come posso fare
RunDLL Error Messge keeps popping up
I get this message everytime Boostspeed runs:
There was a problem starting TaskSchedulerHelper.dll The specified module could not be found.
There was a problem starting TaskSchedulerHelper.dll The specified module could not be found.
Festplattenbereinigung rückgängig machen
Hallo,
am 10.05 wurde eine Festplattenbereinigung durchgeführt. Dabei wurden Datein gelöscht, die nicht gelöscht werden sollteb. Es fehlen ganze Ordner von Dateinen, die dadurch gelöscht wurden.
Wie kann dieser vorgang wieder rückgängig gemacht werden?
es handelt sich speziell umd den "Download" ordner auf der SSD Festplatte C
"Festplattenbereinigung: Heruntergeladene Dateien"
Alle Daten sind gelöscht undich benötige diese jedoch.
am 10.05 wurde eine Festplattenbereinigung durchgeführt. Dabei wurden Datein gelöscht, die nicht gelöscht werden sollteb. Es fehlen ganze Ordner von Dateinen, die dadurch gelöscht wurden.
Wie kann dieser vorgang wieder rückgängig gemacht werden?
es handelt sich speziell umd den "Download" ordner auf der SSD Festplatte C
"Festplattenbereinigung: Heruntergeladene Dateien"
Alle Daten sind gelöscht undich benötige diese jedoch.
System Scan
Every time I run a system scan Boostspeed highlights the TCP/IP internet setting as needing attention. It then says it's resolved it. This occurs on every system scan run.
Any thoughts?
Any thoughts?
Screen Saver Retreval
After a through clening I seem to have lost the screen saver prompt. The program is there and working - but it does not turn on when directed. How do I rescue the code that seems to be lost?
MAPPING USB PORTS TO COM PORTS
Im having trouble with not enough COM Ports for external, USB devices.
With only 1 Si Labs Enhanced and Standard port, and 1 port for the system, as seen in Device Manage, how can I run, for example, more than one sftwr program - intended for a Ham radio transceiver - plus an external, USB microphone plus other external HDD, with or without an external USB Hub?
Why does my HP All-in-one, WIN11 system, work with the internal camera but NOT the internal microphone?
Do I need "virtual ports"? Do I need special drivers and/or hardware?
Thanks.
Phil
With only 1 Si Labs Enhanced and Standard port, and 1 port for the system, as seen in Device Manage, how can I run, for example, more than one sftwr program - intended for a Ham radio transceiver - plus an external, USB microphone plus other external HDD, with or without an external USB Hub?
Why does my HP All-in-one, WIN11 system, work with the internal camera but NOT the internal microphone?
Do I need "virtual ports"? Do I need special drivers and/or hardware?
Thanks.
Phil
Recovery points
I have windows 11, and Auslogics, but cannot locate the reovery points in either.
How does one locate, to use if necessary?
How does one locate, to use if necessary?
Privacy Monitoring
Does Auslogics have a feature to stop data broker sites from obtaining personal info?
Memory Insufficient
I am running Auslogics Disk Defrag 11 on a Windows 2012 R2 server.
Version 11.0.0.2
Full Version (PRO)
I have two drives I am trying to defrag. It used to work but now I am getting "Memory insufficient to perform this operation"
The drives are large:
R drive 83 TB - 19 TB free
S drive 40 TB - 18 TB free
It has 128 GB of memory
Page file is set set to automatic
I have a similar server and it does not have any issues.
Any settings or suggestions I could try.
I have been running Auslogic for about a year with no problem but since the last update I started having this problem on this one server.
Version 11.0.0.2
Full Version (PRO)
I have two drives I am trying to defrag. It used to work but now I am getting "Memory insufficient to perform this operation"
The drives are large:
R drive 83 TB - 19 TB free
S drive 40 TB - 18 TB free
It has 128 GB of memory
Page file is set set to automatic
I have a similar server and it does not have any issues.
Any settings or suggestions I could try.
I have been running Auslogic for about a year with no problem but since the last update I started having this problem on this one server.
vignettes
Votre logiciels a apparemment affecté certains liens, car on ne voit plus les vignettes des photos dans les Fichiers.
Pour les voir il faut les ouvrir les photos dans leur lecteur.
Peut-on les récupérer?
J'ai déjà suivi les indications usuelles de Windows sans résultat.
Est-ce une coincidence?
Merci.
Pour les voir il faut les ouvrir les photos dans leur lecteur.
Peut-on les récupérer?
J'ai déjà suivi les indications usuelles de Windows sans résultat.
Est-ce une coincidence?
Merci.
my battery is working fine but it says its health is bad is that a problem?
So when i test my battery health it says that its health is terrible and reccomends me to change it while its working just fine should i change it or not?
Не понимаю куда девается память
Как мне посмотреть последнии скачанные данные и понять что у меня занимает память? Я буквально скачал расширение на гугл и у меня пропало два гигабайта, как это работает (винодоус 10)
Computer shuts down instead on going to sleep
My Computer shuts down instead on going to sleep. So I have to reboot to start up. Any help would be greatly appreciated.
Thank You
~Bill
Thank You
~Bill
Win 10. Жесткий диск С
Привет! У меня резко , за одну ночь, с дика С пропало 25 Г. Не знаю что делать? Где искать проблему? Как это можно устранить? Не подвергая свой старый ноут переустановки ОС . Windows 10 HOME 22H2 19045.3693 .
Set up your Computer
Each time I log in to Win 11 I am asked if I want to set up my computer.
Is there any way to removed this annoyance? The app doesn't appear in my list of installed apps.
Is there any way to removed this annoyance? The app doesn't appear in my list of installed apps.
DirectPlay issue
Every since I installed Auslogics driver updater I keep getting a message that I need to install directplay. Directplay won't install on my computer and if I choose to skip the installation the attached notification constantly comes up. Is Auslogics driver updater or Bootspeed calling for this outdated windows feature. If I uninstall driver updater I don't get that notification.
What does this DOS/DSS commandline Window temporarily at bootup mean?
SInce installing Auslogics BoostSpeed, it hasn't been happening, but what does this mean?
Recommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 22,5 Mb
Download size: 22,5 Mb
Compatibility: Windows 11, 10, 8, 7