FIX: bdservicehost high cpu / memory usage
I have this problem. Can you tell me a solution? https://windowsreport.com/bdservicehost-high-usage/
my hard drive is WDC W10 EZEX
misea jour Auslogics
Bonjour à vous,
Je n'arrive pas à installer la derniere mise à jour de Auslogics 12 200 malgré la demande qui m'est propose dans le bas de l'écran.
Je suis donc tojjours sur la version 12 101 (je crois).
Merci pour votre aide.
Cordialement
AB.
Bootspeed 12 hung at 13% complete
Started a scan and it is in Stability with a message that says 12047, scanning please wait. Detail screen says 13% complete. Its been like this for 24 hours. What do I do now?
can't activate the virtualisation
thank you
slow ram
Windows 11
Thank You
task manager
To TRIM or to Defrag? Or Both!!??
Confused.
Simon F
Won't allow install
I hated too waste a question, I'm running version 12.0.0.4.
When i try to update to newer version 12.2.0.0 the screen blinks off and then back on.
I have tried the two arrows lower rignt corner only blinks and returns to same window i'm on.
When i go too tools and use the update button i geet the same result, flash on screen and back to same screen.
отказ работы мыши и клавиатуры при установке системы
Icone
Bonjour,
Malgré après avoir réaliser une optimisation de mon disque dur l'icone dans la barre de tâches reste en rouge. Que cela veux dire et comment résoudre pour le mettre en vert
Cordialement
Denis Schmitt
Roaming Folder
Any tools in Auslogic that would address cleaning up my /appdata/Roaming data?
Thanks for your help.
Darian
DNS server
Tab Crashes when go to Look at Report from Deep Disk Cleaner
Compare configuration changes in boostspeed
I have your software in three computers as the license allows, but I can't find how to compare configuration between them, specially in the custom scan and clean for boostspeed. For example in one computer my login screen still shows the photo microsoft chooses, but on the other it doesn't. Maybe you have that in a config or xml file. It may be good to be able to compare.
Regards,
Paul
UsoClient
Hello Auslogics
It seems that every day I get a warning message about a new 'Daily' task being created. That task is UsoClient (see attachment). There always seems to be three occurences of this program, despite this – so I guess that it is being deleted and recreated by Windows.
No doubt this is a Windows thing, but it would be good to understand what is going on here.
Also, if I try to disable it, despite being a local admin, I get an 'insufficient privs' error (see second attachment).
If this is deemed normal behaviour and the program is trustworthy, is there a way of disabling the warning message, but just for this one program?
Thanks and regards
Phil Parkin
Error al actualizar windows
ноутбук Dell перестал распознавать оригинальное зарядное устройство Dell и АКБ не заряжается как раньше.
Ноутбук Dell перестал распознавать оригинальное зарядное устройство Dell и АКБ не заряжается так как раньше.
Ноутбук был приобретен новым и я единственный владец. Раньше всё было в порядке. Установка вашего ПО и запуск всех инструментов пока ничего не дал. Я не могу понять в чём причина?
Ваш софт и фирменный софт Dell сообщает что АКБ находится в отличном состоянии. Сама Windows 7 pro показывает что АКБ подключена к З/У, но сообщает что АКБ не заряжается. АКБ не заряжается даже при полном выключении или перезагрузке ноутбука.
Как решение я вижу возможность также перепрошить BIOS. Пожалуйста, помогите решить вопрос.
Спасибо!
С уважением,
Николай
Pro Version
ANTI-MALWARE PROGRAM CONFLICT W/NORTON SECURITY
Hello - I have your Auslogics Anti-Maleware program and recently added Norton Security. Norton security runs scans in the backgound and for some reason goes after the anti-malware prgram, esentially erasing it. However it leaves my Auslogics BoosSpeed & Auslogics Driver Update prgrams alone, so they continue to run fine. Now every day I have to re-load the anti-malwar program.
I went into Norton checking the Virus & Firewall settings which are set to "allow" your anti-malway program , but it still continues to erase the entire anti-malware application. Do you have any ideas on how to fix this in Norton..?
Auslogics BoostSpeed 12 после проверки сисстемы блокирует и выпиливает AdGuard из сисстемы
NVIDIA 제어판이 안 켜져요
NVIDIA 제어판을 열려고 하면 계속 '현재 NVIDIA GPU에 연결된 디스플레이를 사용하고 있지 않습니다.' 라고 뜹니다. 어떻게 하면 돼나요?
гибернация
Здравствуйте! прошу помочь. после гибернации комп сам через несколько минут включается. зарание спасибо.
原因不明起動しない
症状
電源を押す
電源ボタンとその隣の起動ボタンが伝統する(チカチカ。。。正常)
1分後消える
数分後 画面に「修復している」と出る
その後様々な修復Optionが出るが、起動していないので何もできない
。。
同じことを繰り返していると突然起動できる(現在のように)
上記の状態が前触れもなく発生する
RDP keeps disabling on every machine that has boostspeed installed
I notice that intermittently (seems to do it when it wants to), if I reboot a laptop or other physical endpoint, the machine will boot up with the "termservice" disabled, even though groupm policy enforces this to be on.
After troubleshooting group policy, uninstalling all other security software, and weeks of various other troubleshooting methods, the only commonality I can find is that all the machines that do this have boostspeed installed.
I found this post
https://qa.auslogics.com/question/225
And followed the instructions there. I also turned off the performance monitor in boostspeed via the settings, but the issue is still persisting. My next step I guess is to uninstall boostspeed from all of my machines but I figured I would reach out before I give up on the product.
Crackling sound after few hours
After a few hours of my computer being on, all sounds from the PC will have crackling sounds. There is nothing in particular that triggers it. No specific amount of time before I start to hear it. It has been happening for quite some time now
Thank you
How do I stop starting up when I start the computer
When I start up my computer, PCTuneUp starts up. How do I prevent this from happening.
Internet Explorer re install
Bonjour !
J'ai besoin d'utiliser internet Explorer pour activer un service (système d'authentification qui ne fonctionne qu'avec IE)
Or je ne trouve plus IE sur mon poste. Il n'apparait pas dans Panneau de configuration\Tous les Panneaux de configuration\Programmes et fonctionnalités\Activer ou désactiver des fonctionnalités windows
Je ne me souviens plus comment je n'ai dé"sisntallé, et je me demandais :
- si c'est un tweak de Bootspeed qui l'a désinstallé?
- comme faire pour le ré installer?
J'ai essayé de le re téléchargé en online et en offline mais impossible de termienr l'installation. Soit un message me dit qu'une version plus récente est installée, (Edge), soit l'installation s'arrête sans message d'erreur.
Merci !
Sylvain
PS : la sous-catégorie est obligatoire, mais Internet Explorer n'était pas listé, j'ai donc choisi une valeur approximative
Error 1605 and 1628
I am facing problem about error 1628 and 1605,can you help me to solve this problem?
WordPad problem
Think, it's the only problem I have with my PC and now ALL problems in the future are taken good care of with your comprehensive
system, thank you.
Regards
Henning Reckey
Windows Security - Account Protection
"Dynamic Lock is not working because Bluetooth is off."
I do not know what device to try to turn on to Bluetooth.
Thanks in anticipation.
Mike Kemp
Mobile:
Disk Defrag
Hello
what are the differences between Disk Defrag Pro and Disk Defrag Ultimate ?
If I installed Disk Defrag Ultimate, can I uninstall Disk Defrag
thanks
Paul