Not able to install an upgrade for Boostspeed 12.2.0.0
After completion of the upgrade software, the Help box remains showing my Version as 12.2.0.0
проблема с регистрацией
До недавнего времени проблем не возникало. Последние несколько дней слетает активация, каждый раз при открытии программы предлагает активировать ПРО версию, после ввода ключа выскакивает окно, говорящее, что программа активировани, версия ПРО, но в самой программе никаких изменений нет, кнопка "Активировать ПРО" не исчезает, и в "помощи" ропять то же самое. Что делать, как решить проблему?
Drive C: - Reports Disk has errors
Despite the statement that the report provides details on disk error check AND REPAIR RESULTS, the report simply states that my C:Drive has errors.
There is no indication as to what the errors are or that they have been repaired; on the contrary the errors have not been identified nor have they apparently been repaired.
How do I find out what the errors are and how do I repair them?
Regards, Harry McBride
System Information Report
ID: 05
Name: Reallocated sector count
Value: 134
Worst: 134
Threshold: 140
Raw Data: 522
Status: Prefail
What does this mean and how do I fix it?
Lizenz
Delete wrong user
Want to delete wrong choise
Unable to activate Auslogics Bootspeed 12 PRO Version
Windows refusing access as administrator
ユーザー制御
デスクトップのショートカットから、ブーストスピード開きません。タスクバーからなら開くのに。ユーザー制御ウィンドが出てダメです。ドライバーアップデーターのショートカットも同じです。また、時々ですが、ブーストスピードが開いた時に、すべての画面が白紙画面になります。
アカウントとかセキュリティーの調整をしてみたのですが変わりません。インストールしなおしても変わりません。セキュリティソフトが干渉でもしているのでしょうか?何か良い方法はないでしょうか、お願いします。
Could not activated my license
Program not registered
Thank you
Activating Software Problem
I have now come to the end of my tether with this piece of software. I have been sent a Registration Code because the software I purchased on the 14 Dec 2021 keeps on asking me to Activate Pro Version. I removed the programme from my computer and started afresh. The programme dowloaded and the after putting in my Licence Key it advised me that the programme was registered. However, there is white writing on a green backgroumd in the bottom right hand corner stating: Activate Pro Version (when pressed advises what you get with the Pro version - which I have already purchased!) I have added this as an attachement on an MS Word doc.
Carl Bruce
BOOT SPEED PRO
I HAVE RENEWED MY BOOT SPEED SUBSCRIPTION BUT I CAN'T PERFORM CERTAIN FUNCTIONS I AM ASKED TO TAKE PRO VERSION WHILE I HAVE ALREADY PAID THE BASIC VERSION HOW TO UPGRADE TO THE PRO VERSION WITHOUTPAYING THE 50 EUROS MORE ?
LICENCE N°:
THANK YOU
Aktivation not Possibel
I did try to activate the pro version.
Reslult: The product has been activated
But in realatiy is the green botten still here and its not working as should when activated.
Regards
Kurt
Auslogics 12 is blocked by Windows 10
My Auslogics 12 is blocked by Windows 10. What can I do to fix this problem? And I cannot to set my Auslogics license key. I have just a basic version of programm now.
Программа была заблокирована администратором
About Auslogics BoostSpeed 12
Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします
Hirosuke Kajiyama
Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします
License key ライセンスキー:
Auslogics BoostSpeed 12
Pro version ?
Plus the last time i used driver updater it updated my pc then restarted it and it would not boot up no matter what i tried, I then had to reinstall windows with a backup. not used driver updater since.
Thank You.
Admin. Blocked
Thank You
James Elder
A problem caused this program to stop interacting with Windows.
Application Name: Ddfs32_400.exe
Application Version: 0.0.0.0
Application Timestamp: 602cd97f
Hang Signature: eff9
Hang Type: 134217728
OS Version: 6.3.9600.2.0.0.272.7
Locale ID: 1031
Additional Hang Signature 1: eff9e5103e62437273df6ec28305e96a
Additional Hang Signature 2: 4777
Additional Hang Signature 3: 477790f40c8afa87ecb7402697914cec
Additional Hang Signature 4: eff9
Additional Hang Signature 5: eff9e5103e62437273df6ec28305e96a
Additional Hang Signature 6: 4777
Additional Hang Signature 7: 477790f40c8afa87ecb7402697914cec
Wo steckt der Fehler? - Was soll ich überprüfen?
Windows Security - Account Protection
"Dynamic Lock is not working because Bluetooth is off."
I do not know what device to try to turn on to Bluetooth.
Thanks in anticipation.
Mike Kemp
Mobile:
WINDOWES ANMELDUNG
guten tag auslogics bitte zeigen sie mitr wie mich bei window automatisch anmelden kann ich fibde nicht diese einstellung um sich am pc automatisch nach einem start in sein ew´windows anmelden kann und dies mithilfe dea speed bosters 11 diesen vorgang automatistren kann. besten dank im voraus.
b.b banuscher
블루스택 튕김현상
제가 블루스택으로 마블 퓨쳐파이트 라는 게임을 하고 있습니다.
하지만 자동사냥을 돌리면 중간에 딱 멈추고 화면을 클릭하면 바로 튕기고 게임이 꺼집니다.
해결 방법이 있나요?
잠깐 찾아보기엔 렉 유발 되는거처럼 성능을 좀 요구하는 게임이 그럴 수 있다고 하는 거 같긴합니다.
Процессы
Какие процессы можно закрыть или остановить на компьтере, снижающие производительность и не нужные в конкретны момент времени?
О пояснениях к информации в Startup Manager
Здравствуйте! Программа Startup Manager выдала информацию, которую я Вам направляю в прилагаемом скриншоте. Вопрос по программе Orphaned SecurityHealth из раздела Реестр/запустить.
По имеющейся информации, производитель программы - неизвестен, рейтинг - неизвестен, существует - нет. Смотрел в интернете, нашел только описание о SecurityHealth, для которой все указанные выше характеристики указаны. Что это за программа у меня в операционной системе? Нужна ли она?
registrazione su un terzo compiuter
Attualmente ne ho solo due e non riesco a collegarmi al terzo che non è mio ma di un mio collaboratore
Certificates
Good evening,
I have an issue with my computer no longer reading the certificates when I insert my id card into a card reader on my computer. I've tested the card reader on different computers with windows 10 as well. So it's not the device or id card. I tested different card readers to no avail as well. It seems to be a softare issue that I think Austologics is blocking or something else. I've tried different browers and that also did not lead to any success.
SSD Defrag Process
I use a Dell Latitude with an SSD drive. I note that some people recommended that the SSD should not be defragged as it can cause unnecessary wear and tear which will reduce its life span. Every time I run Boot speed it attempts to defrag the SSD. Two questions – (1) Does it really shorten the life of a SSD if it is defragged on a regular basis and (2) If I chose not to defrag how I stop this from happening other than every time manually untick the defrag box prior to hitting the “resolve all” button.
Many thanks in advance for your response.
Auslogics BoostSpeed12Proか゛認証されない
本日2022.01.21Gingから追加購入しましたが、ライセンス認証はされますが、何度してもライセンス認証されても【Pro版】に成りません
1.購入日:2022.01.21
2.製品名:Auslogics BoostSpeed12Pro(3PC用)
3. ライセンスキー 【
サウンドドラィバーの変更方法
viewing bottom of page.
Start buttons etc., at bottom of page are often off the page.
taskbar is at top of screen
reducing page size ratio is no help
Please help.
Problèmes registre
Two issues:Text freezes and unsatisfactory settings
Also - despite my choice of most comfertable writing thumbnail - set my screen too bright with choppy text.
Please advise
Jessica
Richiesta di un consiglio
Buongiorno,
desideravo un Vs. consiglio:
sono già in possesso di Auslogics Disk Defrag 9.
Per migliorare in generale le prestazioni del mio computer sono indeciso se acquistare:
A) Driver Updater
oppure
B) BoostSpeed 11
domanda: BoostSpeed 11 include già anche Driver Updater ?
... non vorrei acquistare programmi uguali ...
Cosa mi consigliate di acquistare? Driver Updater oppure BoostSpeed 11 ?
Grazie e un cordiale saluto.
Regarding RAM Optimization
Hi, This's Mainak. Today I Activated Your License. Can You Help Me Out How To Enable "RAM Optimization".
Would Like To Have Reply On This.
Thanks
Mainak
default_error_stack
While running the BoostSpeed full system scan, it was taking forever, (around 50 minutes to get to 25% of scanning files). I checked the details and found that it was working its way through the default_error_stack files (several hundred thousand of them) in the windows\system32 folder. because of this I stopped the scan and now need to know how to get rid of these files or get BoostSped to bypass them