1794 questions

System Information Report

The System Information report for my external backup hard drive above shows the following;

ID: 05
Name: Reallocated sector count
Value: 134
Worst: 134
Threshold: 140
Raw Data: 522
Status: Prefail

What does this mean and how do I fix it?
840 views
Jan 26, 2022 at 08:33 PM

Lizenz

Warum wurde meine Lizenz gesperrt ich kann das Programm nicht mehr öffnen ich habe im Dezember 2021 verlängert und gekauft. Bitte um Freischaltung. Danke
580 views
Jan 26, 2022 at 07:56 PM

Delete wrong user

After boot. Windows ask for user. To choise of two with same name en than pin code.
Want to delete wrong choise
615 views
Jan 26, 2022 at 04:58 PM

Unable to activate Auslogics Bootspeed 12 PRO Version

I have been having issues now for more than a week I keep getting the message the my PRO Version is not atctivated despite me doing it countless times. Please can you advise what to do.
607 views
Jan 26, 2022 at 12:46 PM

Windows refusing access as administrator

Why has Windows started to refuse access to my newer version of Defrag? I have had to take it off my laptop and reinstall an older version to attain use of my perfectly safe and legitimate copy
585 views
Jan 26, 2022 at 09:34 AM

ユーザー制御

デスクトップのショートカットから、ブーストスピード開きません。タスクバーからなら開くのに。ユーザー制御ウィンドが出てダメです。ドライバーアップデーターのショートカットも同じです。また、時々ですが、ブーストスピードが開いた時に、すべての画面が白紙画面になります。
アカウントとかセキュリティーの調整をしてみたのですが変わりません。インストールしなおしても変わりません。セキュリティソフトが干渉でもしているのでしょうか?何か良い方法はないでしょうか、お願いします。

944 views
Jan 26, 2022 at 09:10 AM

Could not activated my license

I have bought the pro license at July 2021 and used this software until mid of january. Suddenly the software ask me again for license code, and after I input my code, the software still on free version mode and not changed to PRO version. Please assist me regarding this problem
710 views
Jan 26, 2022 at 02:49 AM

Program not registered

As you can see in the attached show is registred, but the program says need to rgister for pro version. Please advise as I have renewed the license in december.

Thank you
617 views
Jan 25, 2022 at 08:58 PM

Activating Software Problem

I have now come to the end of my tether with this piece of software. I have been sent a Registration Code because the software I purchased on the 14 Dec 2021 keeps on asking me to Activate Pro Version. I removed the programme from my computer and started afresh. The programme dowloaded and the after putting in my Licence Key it advised me that the programme was registered. However, there is white writing on a green backgroumd in the bottom right hand corner stating: Activate Pro Version (when pressed advises what you get with the Pro version - which I have already purchased!) I have added this as an attachement on an MS Word doc.
Carl Bruce

Content hidden to protect privacy

735 views
Jan 25, 2022 at 05:18 PM

BOOT SPEED PRO

I HAVE RENEWED MY BOOT SPEED SUBSCRIPTION BUT I CAN'T PERFORM CERTAIN FUNCTIONS I AM ASKED TO TAKE PRO VERSION WHILE I HAVE ALREADY PAID THE BASIC VERSION HOW TO UPGRADE TO THE PRO VERSION WITHOUTPAYING THE 50 EUROS MORE ?

LICENCE N°:

Content hidden to protect privacy


THANK YOU

599 views
Jan 25, 2022 at 02:26 PM

Aktivation not Possibel

Hi

I did try to activate the pro version.
Reslult: The product has been activated

But in realatiy is the green botten still here and its not working as should when activated.

Regards
Kurt
963 views
Jan 25, 2022 at 11:00 AM

Auslogics 12 is blocked by Windows 10

Hi!
My Auslogics 12 is blocked by Windows 10. What can I do to fix this problem? And I cannot to set my Auslogics license key. I have just a basic version of programm now.
804 views
Jan 25, 2022 at 08:52 AM

Программа была заблокирована администратором

Вероятно возникла проблема с цифровой подписью файла integrator.exe. Программа не может быть активирована лицензионным ключом.
440 views
Jan 25, 2022 at 08:36 AM

About Auslogics BoostSpeed 12

Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします 

Content hidden to protect privacy

727 views
Jan 25, 2022 at 06:59 AM

Hirosuke Kajiyama

Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします 

License key ライセンスキー:
Auslogics BoostSpeed 12

Content hidden to protect privacy

837 views
Jan 25, 2022 at 06:46 AM

Pro version ?

Noticed my Boostspeed progaram has the activate pro version on the bottom of the screen when i have already registered it.

Plus the last time i used driver updater it updated my pc then restarted it and it would not boot up no matter what i tried, I then had to reinstall windows with a backup. not used driver updater since.
Thank You.
712 views
Jan 25, 2022 at 06:01 AM

Admin. Blocked

When trying to open Boostspeed, I am getting a popup stating Admin Blocked, go to an Administrator Integrator.exe. How can I clear this. If I re-download the basic program will open, when I type in my registration code, I'm sent to the store pager in AOL. Any help with this problem would be appreaciated.
Thank You
James Elder
813 views
Jan 25, 2022 at 05:56 AM

Не активируется программа при наличии лицензионного ключа

Добрый день! Образовались проблемы с Вашей программой: не активируется про версия (у меня есть подписка и лицензионный ключ), не запускается программа отдель после закрытия ( пишет: "Администратор заблокировал доступ к этому приложению". Очень странно, ведь я этого не делал)) и подтормаживания и общие сбои в работе приложения, хотя система весьма мощная и не хватку мощности можно смело исключить. Как быть? Что делать?
428 views
Jan 25, 2022 at 04:25 AM

アプリが起動しない

前略、 
NOBUYUKI KOIZUMI(小泉宣之) 

Content hidden to protect privacy


以上

741 views
Jan 25, 2022 at 04:07 AM

activation Boostspeed

Hello,
I have been using Boostspeed pro for years, and now the software only opens in the free version, even when I copy the activation key received in December by email.
A window appears, saying "Registered software", yet the software remains in free version.
Can you help me solve this problem?
560 views
Jan 24, 2022 at 11:37 PM

Screens Blacks Out (Stops Displaying on Minor Electricity Surges from Fridge-Freezer)

Screens Blacks Out (Stops Displaying on Minor Electricity Surges from Fridge-Freezer), but only when using HDMI connection. Happens approx. every 30 mins or so, sometimes every 15 minutes.
1064 views
Nov 16, 2019 at 08:19 AM

Problema con Auslogics Driver Updater

Buenos dias, tengo un problema con la aplicacion Auslogics Driver Update, ya solicite anteriormente me solucionen este problema, inclusive me solicitaron que reinstale el aplicativo, pero no se soluiciona este proble, por favor tengo que actualizar algunos drivers, pero se queda la PC congelada cuando va hacr la actualizacion de dichos driver, para constancia les envio fotos del problema.

1063 views
Feb 16, 2021 at 03:07 PM

Why auslogics boostspeed can't solve this ?

Hello. I'm a regular gamer, but when I play a game, no matter which one, my computer always crashes. Everyday, for months. I have used boostspeed 11 many times to fix this, but despite what Auslogics promised, my computer is no more stable than before. Nothing has changed. So I’m wondering what it pays to pay for software that promises to take care of our computer’s system, if it’s just basic operations that don’t solve anything. If nothing changes, I will not renew my subscription. If you need information about my hardware, don't hesitate to ask me. Thank you. Sincerely, Arnaud

1060 views
Apr 27, 2020 at 08:32 AM

Boost speed does not recognise pro

I have been using pro version for several years now it asks me to activate pro which it rquires me to pay for which is totally wrong as I renewed my subscription in 2021. It also tell me that an admistrator has blocked me opening the program, this is aloso wrong as I am the system operator and have not blocke Boostspeed. I have re- installed the program and re entered the key 3 times so far it will not work correctly as it tell me tah I don not have pro which is WRONG.
Colin Summerfield
1059 views
Jan 21, 2022 at 10:59 AM

Goods

Auslogics softweare Goods normal or better other brand name Goods

1058 views
Mar 26, 2020 at 01:09 AM

Start Menu Disappeared

A few weeks ago while using Windows 10 on my desktop computer, the monitor momentarily went black then came back on. But since then the Start Menu is totally missing. After clicking on Start button, an error message comes up now.

1058 views
Jan 13, 2020 at 05:11 PM

No generic, or cliche answers and then a subjective hardware ?

Please dont "mail" this in! I am realtively PC savvy, not an IT genius, but I built this PC and have a little knowledge about a lot of things but I want to know hidden or not-well-known settingsto enhance speed and performance of my PC ...so What tweaks should I implement or adjust, that BootSpeed12 will do for me, to get the fatest possible PC? IE dont tell about turning off start up apps or processes etc, I already knoiw that... and lastly...
what should be next PC build under $1000 (not including monitor) give me CPU, HDD,RAM and GPU specs
Impress me!
This is not really a right or wrong answer so pleae cosult your collegaues because it will be challenging to surprise or impress me but there are so many settings on this software that there are bound to be 'Illuminati type of stuff
1057 views
Jan 13, 2021 at 10:55 PM

Driver update

Hello,

Subcategory is not correct (cannot select something else), please ignore.

I get a message from the driver updater that a driver is not up to date.
It is about PnP-Monitor Lock
It says:
Outdated driver 16.10.46.576 of 21/01/2019 Remote Utilities LLC
New driver 1.0 15/06/2015 BenQ Inc.

How is it that a newer driver is outdated?
Should I install the older driver?

1057 views
Aug 04, 2021 at 02:06 PM

Sudden switch to No Error Mode

I am using a ASUS N73S system with W10-64, Windows standard firewall and Kaspersky antivirus. All softwares are update and everything runs fine.
Working with IExplorer and Edge in parallel, suddenly the screen turns black and the system is blocked during 3 or 4 seconds, then the screen pops up again and the system reactivates in Without Error Mode. I have to reboot and the system reactivate in Normal Mode. This looks like a stability problem, but maybe a compatibility case between edge and ie.
Thank you to help me

1057 views
Nov 08, 2019 at 09:15 AM

integrator.exe грузит процессор

Процесс integrator.exe грузит процессор постоянно, как это исправить?

1055 views
Dec 31, 2020 at 07:13 PM

windows run slow

hi , my windows be slowly than when i buy it and i don t know what should i do for it , i think its for that my computer ruuning some applications atumotacely and i should close them in the task bar , what shoud i do?
1054 views
Sep 12, 2019 at 01:23 PM

Suggestion / Idea

Hello Auslogics

This is not a question for you, merely an idea for additional software functionality. I think it could be a great feature.

I sometimes look at Event Logs for my Windows 10 PC, usually filtering out 'Information' type logs.

There are often events there that are errors. Sometimes these errors are happening thousands of times a day, but they happen silently and do not appear to impact my day to day work. But they must be hurting performance.

But if there was an 'Analyse Event Log Results' feature in BoostSpeed, which provided helpful feedback to users about those errors and suggested ways of resolving them, I would definitely use it.

I bet it would not be easy though!

Best regards
Phil
1054 views
Nov 04, 2021 at 08:38 AM

slow running windows

do i need to change my windows ? its 10 but its very old

1053 views
Mar 08, 2020 at 12:56 PM

BootSpeed 12 installation software

I just bought an additional laptop can I use my paid subscription and install it in my computer

1052 views
Mar 02, 2021 at 09:47 AM

Cannot use keyboard Up and Down arrows in Windows Clipboard History since today.

I have been using windows clipboard daily as a part of my routine, always used to copy my contents using that. But now when i use Windows+V the Clipboard manager pops up left or right of the screen and when i use arrow keys chrome is scrolling(Copying contents to chrome).
Earlier i selected the copied contents using arrow keys and used Enter key to enter the data, Now its not working, i need to use mouse every single time.
1051 views
Sep 27, 2020 at 12:25 PM

cleaning done or not done?

Each time when I do a manual clean of: one click scanner, reg cleaner, duplicate file finder, deep disk cleaner, the page displays the following message.
This has not been cleaned since (date), Also, immediately after the internet optimiser has been run and optimised and rebooted it requires another scan to optimise straight after the reboot.
I looks as if the program does all the tasks required but does not record it as being done.
Your comments appreciated
Bill

1049 views
Sep 06, 2020 at 05:37 AM

Re-enable the Windows key on the keyboard

How do I Re-enable the Windows key on the keyboard. Something in Boostspeed disabled it.
1049 views
Nov 14, 2022 at 05:14 PM

defrag ssd

you product wants to defrag and tweak my ssd is this safe?

1049 views
May 06, 2020 at 09:29 AM

Windows 11

I have a Lenova Yoga 510 14ISK i7-6500

Apparently my machine is not compatible for the Windows 11 upgrade.

What do I need to do to make it compatible?
1046 views
Dec 01, 2021 at 09:15 PM

Windows 10 Restart Stalls

I recently had to do a Windows re-install (repair technician did in shop) because of BSOD issue related to dell driver. I bought BoostSpeed 11 to try keep my PC in good operating condition and help with many of the Windows issues including fixing a restart problem. Since the re-install of windows, restart actually restarted just once. Now when try restart it just goes through the motions, on screen message says restarting windows and monitor goes dark (power is on) but restart does not happen. I wait 5 minutes and then press power button to shutdown. I repress power button to bring windows back on. Windows 10, using this method takes usually between 45 to 60 seconds.

If it wasn't for windows updates I could live with not using the restart option. However, windows update requires the restart so I expect it to fail each time there is an update. Recently did scan and did the suggested tweaks in the Maintain section of BoostSpeed 11. Any thoughts or suggestions?
1045 views
Aug 08, 2020 at 02:50 PM