1859 questions

After Auslogics did some repairs, alot doesnt work

I really cant type out the problems im having all because there are so many... I just got a Performace Scan message from Auglogics as I am typing this message stating "its been 6 days since your last scan" but im afraid to run anything on auglogics. I need a Tech that knows computers very well to remote connect to my laptop and see if they can fix some if not all of these problems that came about. I will list some of the problems I am encountering but first I want to say that everthing did work before. I used to be a windows insider but now my diagnostic data is set to basic and i cant chage it to full.. In yellow, at the top of the windows settings page it now says that I do not have authorization or this setting is being controlled by your organizer. I dont have an Organizer. Ive never seen that Yellow Font orginazation control lock or what ever it is, ever before until about a week ago when i ran the last scan with auglogics. Its not just on that Diagnostic sending part, I find that I get that controlled by my orginazation lock out on all kinds of settings and controls. I work as a heavy equipment machinery driver and work doesnt even have comptures, im not in school or connected to any school account.. I bought my own brand new laptop about 3 months ago, its connected on my home network Optimum Internet and my outlook account isnt attached to anything but my Xbox One X and like i said it was never there before... I cant type in any Windows app or the task bar without having to hit the windows key + R and enter C:\Windows\System32\ctfmon.exe and then it works, but needs to be done everytime i turn my laptop on... I used to always have my Samsung Fit 64 gig tiny flat USB and my SDXC 64 gig 170Mbps read/write card set to enable read and write and catch. Not Readyboost.. but now i cant do that. both USB and SDXC are all over the place.. I have gigabyte speed from optimum and yet my whole computer runs slow... I cant type in the search bar and get my apps show up, or update, or power plan. nothing... AND for some reason, Ive NEVER had 4 accounts. when i turn my laptop on i can only log into my account like normal. but then when you look at the account users, theres administrator, then there is like 3 accounts of my name.. i dont know what to do

1432 views
May 06, 2020 at 04:31 PM

defrag ssd

you product wants to defrag and tweak my ssd is this safe?

1225 views
May 06, 2020 at 09:29 AM

Запуск Виндовс

Доброго времени суток. После пользования вашим продуктом у меня стало чтото не то с загрузкой виндовс. Сначала все идет нормально. Загрузка биоса. Потом заставка загрузки виндовс. Потом у меня экран отключается и в таком состоянии минут 15. Экран от ПК не получает никаких сигналов. Как мне это отключить? Что бы была нормальная загрузка рабочего стола после заставки загрузки виндовс? Это началось сразу же после использование Ауслоджик Буст Спида. Откат системы я сделать не могу.

1433 views
May 06, 2020 at 05:50 AM

Démarrage anormal

Bonjour,
J'utilise une unité ASUS N73SV sous Windows10 qui me donne entière satisfaction.
Logiciel de sécurité Kaspersky, Firewall Windows, Analyses périodiques par Auslogics Anti-Malware.
Aucune attaque virale jusqu'à aujourd'hui.
Depuis un an environ la touche habituelle de demarrage - au dessus du clavier à droite - ne fonctionne plus; le pc ne demarre pas.
Pour demarrer le pc, il faut appuyer sur la touchei se trouve tout au dessus du clavier à gauche, donc la symetrique de l'autre.
Mais au lieu d'activer directement Windows, cela active le Bios (son de boot tres fort) puis Windows (son de boot normal).
J'ai entrepris plusieurs fois de comprendre et réparer mais sans succès.
Je souhaite revenir à un fonctionnement normal.
Merci de votre aide.
Kind regards,
Jean Farny
1178 views
May 03, 2020 at 04:35 PM

Auslogics registry cleaner

Can certain categories be excluded when using registry cleaner?
REASON: after using registry cleaner I get an error message when I open MSMoney. I can correct this using Money setup, but registry cleaner does something to reverse my setup correction.

System: Windows 7 Home Premium

1385 views
Apr 29, 2020 at 10:41 PM

Отвалился BlueTooth

Добрый день
на обоих моих ноутбука пропал блутус. Возможно что то позволил исправить программе не проконтролировав. Как включить блютус снова? В скрытых девайсай его вижу. Система предлагаетпереустановить драйвер, но дело явно не в этом.

1460 views
Apr 29, 2020 at 06:00 AM

Здравствуйте, программа Auslogics не запускается вместе с включением компьютера, как исправить?

Здравствуйте, программа Auslogics не запускается вместе с включением компьютера, как исправить?

1265 views
Apr 29, 2020 at 01:50 AM

Disco duro se encuentra al 100%

Hola, ultimamente he notado que mi disco duro se encuentra al 100% y las aplicaciones se abren lento, cuando tenia windows 7 no me pasaba esto supongo que es por el sistema operativo tengo windows 10 pro, ¿habra una solucion para bajar el uso del disco ?

1268 views
Apr 28, 2020 at 02:59 AM

POST interruption

What could be the problem when most of the time during Boot on Message "Warning System Boot fail or post interruption".

Press continue or press del to load bios setup.

1209 views
Apr 27, 2020 at 08:51 AM

Why auslogics boostspeed can't solve this ?

Hello. I'm a regular gamer, but when I play a game, no matter which one, my computer always crashes. Everyday, for months. I have used boostspeed 11 many times to fix this, but despite what Auslogics promised, my computer is no more stable than before. Nothing has changed. So I’m wondering what it pays to pay for software that promises to take care of our computer’s system, if it’s just basic operations that don’t solve anything. If nothing changes, I will not renew my subscription. If you need information about my hardware, don't hesitate to ask me. Thank you. Sincerely, Arnaud

1289 views
Apr 27, 2020 at 08:32 AM

Malware

How can I minimize the picking up of malware by using your toolkit?

1711 views
Apr 25, 2020 at 10:50 PM

Temperature

I am using Windows 8.1. Is there a provision in BoostSpeed 11, for setting the Disk/Processor Temperature at which the PC will switch off?

1409 views
Apr 22, 2020 at 04:00 PM

ms-resource: ProductName を取り除きたい

Windows10 バージョン 2004 (OSビルド 19041.207)
スタートメニューのその他グループに

"ms-resource: ProductName"  を取り除きたい


このアプリは開かず、アンインストールもできない

2877 views
Apr 22, 2020 at 01:56 PM

sudden shutdown

why is my pc suddenly shuts down without warning every 10 to 20 minutes

1331 views
Apr 20, 2020 at 08:19 AM

OpenAL32.dll.

Пожалуйста посоветуйте файл OpenAL32.dll. последствия

1663 views
Apr 19, 2020 at 06:26 AM

Windows 10 logon password via Auslogics

Hello!
I am not new to Aulogics - great product! However, I am a new Aulogics 11 user. In Aulogics, in trying to bypass Windows 10 Logon on my Lenovo, I believe the password that was pre-autofilled may have been incorrect? I chose by-pass Windows logon, however when my laptop restarts the first User screen tells me my Password is incorrect. How do I fix this in Aulogics? Any help would be appreciated! ~Catherine Trager

Content hidden to protect privacy

1514 views
Apr 18, 2020 at 05:41 PM

Повышенное потребление ресурсов

Периодически всплывает уведомление о повышенном потреблении ресурсов. По клику открывается Task Manager, из информации в котором я понимаю только, что процессор загружен на 100%, оперативная память тоже. Я и сам замечаю, что компьютер часто тормозит и процессор нагревается до 50 градусов.
Компьютер новый (моноблок Lenovo, W10), программ в автозагрузке не более десяти. Прежний моноблок, которому более пяти лет с W 8.1, на котором установлено гораздо больше программ, ведёт себя гораздо резвее.
И что со всем этим делать? В Task Manager не вижу каких-либо инструментов. Уж не сама ли ваша программа Auslogics Boost Speed 11 тормозит систему?

1011 views
Apr 18, 2020 at 05:17 PM

Кэш второго уровня

Здравствуйте, в прошлых версиях была возможность через Tweak Manager включить исплользование кэша втрого уровня. В 11 версии неполучается найти данную функцию. Подскажите как это сделать.

1423 views
Apr 18, 2020 at 10:31 AM

System Restore

Desktop just started on off when sitting in sleep mode, A tried to update Microsoft Windows 10, took update, Still on off multi. times daily B, tried System restore tells me could not preform System Restore Still on ,off mode , C What setting in resuce center would fix this System Restore problem.s all from same date around System 3 or 4 from same date close to restore point date. Is Boostspeed 11 causing this problem

1412 views
Apr 16, 2020 at 06:59 PM

help needed

Hi, I don't think it's about you, but if you can help me I'll be very grateful.
i have two devices
1.micro sd 16GB apacer
2.flash memory 16GB apacer
these two device now is WRITE PROTECTED and i have download every tools and tricks exist in world for flash these but no one responding.
now pls pls pls pls pls pls help me in my country there is no official represent from apacer or others pls help me tnx a lot and i very respect u and ur works and apps

respectful.TOOFAN

1351 views
Apr 16, 2020 at 08:42 AM

activate windows 10

I was on Insider program which loaded enterprise edition a few years ago.

When computer crashed it reloaded a windows 10 home and now wants me to activate the 10 program. I paid for a win 10 home edition but it will not accept the activation code because of the enterpirse edition I just use without the activation. I tried talking to microsoft and not any answer.

PTGinter

1253 views
Jun 22, 2020 at 01:49 AM

Driver update

Hello,

Subcategory is not correct (cannot select something else), please ignore.

I get a message from the driver updater that a driver is not up to date.
It is about PnP-Monitor Lock
It says:
Outdated driver 16.10.46.576 of 21/01/2019 Remote Utilities LLC
New driver 1.0 15/06/2015 BenQ Inc.

How is it that a newer driver is outdated?
Should I install the older driver?

1253 views
Aug 04, 2021 at 02:06 PM

Double Clicking

Lately (last several weeks) the vast majority of my on-screen selections require a 'double click' on the mouse in order for advancing. How can I correct this so movement on-screen can be accomplished with just a single click on the mouse? Could this be an associated problem with Boostspeed's notice of "Hish system resource usage detected' and I "might experience extreme PC slowdown"?

1252 views
Jan 31, 2020 at 02:56 PM

Cant Access app

I can access everything on my computer except for a application and winrar after updating my windows.


It shows Windos cannot access the specified device, path or file. You may not have the appropiate permissiong to access the item. I reformated my pc and its the same.

1251 views
Jun 15, 2020 at 10:42 PM

Cortana

I have removed Microsoft edge and Cortana from my computer but on start up it shows in the Event Viewer that there is always 2 errors relating to searching for the Cortana package (Appx PackageSync). Just wondering if you know how I can stop my computer from looking for Cortana at all.

Regards
John
1250 views
Dec 08, 2020 at 12:25 AM

how to find and permanently scrub wipe erase delete WIN10 VSS/ Shadow Copy files

Have disabled VSS ok.
Can find no way to erase existing files created by VSS, and they have eaten up neary 50% of my hdd over the last year.

Any help much appreciated!

Best Regards,
Scotty :-)

1249 views
May 24, 2020 at 08:18 PM

Disk Defrag

Why does Auslogics Boostspeed 12 recommend doing an SSD defrag when all the experts say that an SSD drive should not be optimized because it decreases it's life span?

1249 views
Apr 23, 2021 at 12:39 PM

обновление windows10

сколько трафика примерно нужно потратить для обновления windows 10 версия 1909 до версии 2004 в гигабайтах

1247 views
Jun 15, 2020 at 05:11 AM

MSCONFIG settings

I am curious , do you have settings needed for faster start ups of the msconfig settings ? For it will make start ups even faster in windows 10 or more than likly even in windows 7 & 8 as well.

1245 views
Mar 10, 2020 at 05:02 PM

Boost speed does not recognise pro

I have been using pro version for several years now it asks me to activate pro which it rquires me to pay for which is totally wrong as I renewed my subscription in 2021. It also tell me that an admistrator has blocked me opening the program, this is aloso wrong as I am the system operator and have not blocke Boostspeed. I have re- installed the program and re entered the key 3 times so far it will not work correctly as it tell me tah I don not have pro which is WRONG.
Colin Summerfield
1245 views
Jan 21, 2022 at 10:59 AM

Unable to download standard apps like calculator etc

I am using Windows 10 Pro Version 20H2 OS build 19042.964. recently some of the basic windows apps like Caculator, Calendar etc are not working in my system. Windows Defender firewall is also not running. Any solutions please advice.
1244 views
May 05, 2021 at 12:50 PM

Windows 10 Reliability Monitor issue.

I am using Windows 10 20H2 version and BoostSpeed 12 new version.
Control Panel>Security and Maintenance>Reliability Monitor activated history is not available but for 1 day, no computer
reliability and problem history is shown in the graphic display. I have a lap top computer with the same setup as my desktop
and deleted BoostSpeed 12 from the laptop. The reliability and problem history started to show up on the chart. I conclude that there is something in the BoostSpeed software that is affecting this control panel issue. Got any fixes?
1244 views
Dec 30, 2020 at 04:42 AM

Synchronisation

Guten Tag,

ich will die Synchroniation wieder einschalten. Den Tweak wieder Rückgängig machen.
1244 views
Jan 24, 2021 at 01:00 PM

Discounts

Hello Team!

Have been using a free version of your BoostSpeed program and liked it a lot. Thank you for such excellent software. I was wondering if it's possible to get a discount on the pro version as I would really like to use it fully.

Thanks
1243 views
Oct 29, 2021 at 04:51 PM

slow running windows

do i need to change my windows ? its 10 but its very old

1239 views
Mar 08, 2020 at 12:56 PM

Сброс настроек входа в систему Windows

Добрый день!
Каждый раз при использовании сканирования системы утилититой, после перезагрузки сбрасываются пароли для входа в Windows. Настройки сканирования ни к чему не приводят. Спасибо.

1238 views
Aug 09, 2021 at 03:41 PM

No generic, or cliche answers and then a subjective hardware ?

Please dont "mail" this in! I am realtively PC savvy, not an IT genius, but I built this PC and have a little knowledge about a lot of things but I want to know hidden or not-well-known settingsto enhance speed and performance of my PC ...so What tweaks should I implement or adjust, that BootSpeed12 will do for me, to get the fatest possible PC? IE dont tell about turning off start up apps or processes etc, I already knoiw that... and lastly...
what should be next PC build under $1000 (not including monitor) give me CPU, HDD,RAM and GPU specs
Impress me!
This is not really a right or wrong answer so pleae cosult your collegaues because it will be challenging to surprise or impress me but there are so many settings on this software that there are bound to be 'Illuminati type of stuff
1237 views
Jan 13, 2021 at 10:55 PM

Start Menu Disappeared

A few weeks ago while using Windows 10 on my desktop computer, the monitor momentarily went black then came back on. But since then the Start Menu is totally missing. After clicking on Start button, an error message comes up now.

1235 views
Jan 13, 2020 at 05:11 PM

Sudden switch to No Error Mode

I am using a ASUS N73S system with W10-64, Windows standard firewall and Kaspersky antivirus. All softwares are update and everything runs fine.
Working with IExplorer and Edge in parallel, suddenly the screen turns black and the system is blocked during 3 or 4 seconds, then the screen pops up again and the system reactivates in Without Error Mode. I have to reboot and the system reactivate in Normal Mode. This looks like a stability problem, but maybe a compatibility case between edge and ie.
Thank you to help me

1234 views
Nov 08, 2019 at 09:15 AM

error code 46362C1-0B211304-00000A09

This error code has been stopping me from opening numerous files. I cannot find any solution to it on MS error code site.
It has been driving me crazy for months now.
46362C1-0B211304-00000A09
Thanks,
Jim
1233 views
Oct 27, 2021 at 07:38 PM