Cannot activate
WHEN I TRY TO USE THIS VERSION, IT STATES I HAVE ONLY THE FREE VERSION, AND WHEN I TRY TO USE THE PRO VERSION THE WEBSITE WANTS ME TO PAY FOR IT AGAIN,BUT SAYS IT IS REGISTERED ALL OK
FOR EXAMPLE WHEN I TRY TO DEFRAG, IT ONLY DEFRAGS, I CAN NO LONGER DEFRAG AND OPTIMSE MY DISCS AS BEFORE
THIS IS REALLY FRUSTRATING AS I HAVE BEEN A LONG TIME SUBSCRIBER
PLEASE HELP.
Not able to install an upgrade for Boostspeed 12.2.0.0
After completion of the upgrade software, the Help box remains showing my Version as 12.2.0.0
проблема с регистрацией
До недавнего времени проблем не возникало. Последние несколько дней слетает активация, каждый раз при открытии программы предлагает активировать ПРО версию, после ввода ключа выскакивает окно, говорящее, что программа активировани, версия ПРО, но в самой программе никаких изменений нет, кнопка "Активировать ПРО" не исчезает, и в "помощи" ропять то же самое. Что делать, как решить проблему?
Drive C: - Reports Disk has errors
Despite the statement that the report provides details on disk error check AND REPAIR RESULTS, the report simply states that my C:Drive has errors.
There is no indication as to what the errors are or that they have been repaired; on the contrary the errors have not been identified nor have they apparently been repaired.
How do I find out what the errors are and how do I repair them?
Regards, Harry McBride
System Information Report
ID: 05
Name: Reallocated sector count
Value: 134
Worst: 134
Threshold: 140
Raw Data: 522
Status: Prefail
What does this mean and how do I fix it?
Lizenz
Delete wrong user
Want to delete wrong choise
Unable to activate Auslogics Bootspeed 12 PRO Version
Windows refusing access as administrator
ユーザー制御
デスクトップのショートカットから、ブーストスピード開きません。タスクバーからなら開くのに。ユーザー制御ウィンドが出てダメです。ドライバーアップデーターのショートカットも同じです。また、時々ですが、ブーストスピードが開いた時に、すべての画面が白紙画面になります。
アカウントとかセキュリティーの調整をしてみたのですが変わりません。インストールしなおしても変わりません。セキュリティソフトが干渉でもしているのでしょうか?何か良い方法はないでしょうか、お願いします。
Could not activated my license
Program not registered
Thank you
Activating Software Problem
I have now come to the end of my tether with this piece of software. I have been sent a Registration Code because the software I purchased on the 14 Dec 2021 keeps on asking me to Activate Pro Version. I removed the programme from my computer and started afresh. The programme dowloaded and the after putting in my Licence Key it advised me that the programme was registered. However, there is white writing on a green backgroumd in the bottom right hand corner stating: Activate Pro Version (when pressed advises what you get with the Pro version - which I have already purchased!) I have added this as an attachement on an MS Word doc.
Carl Bruce
BOOT SPEED PRO
I HAVE RENEWED MY BOOT SPEED SUBSCRIPTION BUT I CAN'T PERFORM CERTAIN FUNCTIONS I AM ASKED TO TAKE PRO VERSION WHILE I HAVE ALREADY PAID THE BASIC VERSION HOW TO UPGRADE TO THE PRO VERSION WITHOUTPAYING THE 50 EUROS MORE ?
LICENCE N°:
THANK YOU
Aktivation not Possibel
I did try to activate the pro version.
Reslult: The product has been activated
But in realatiy is the green botten still here and its not working as should when activated.
Regards
Kurt
Auslogics 12 is blocked by Windows 10
My Auslogics 12 is blocked by Windows 10. What can I do to fix this problem? And I cannot to set my Auslogics license key. I have just a basic version of programm now.
Программа была заблокирована администратором
About Auslogics BoostSpeed 12
Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします
Hirosuke Kajiyama
Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします
License key ライセンスキー:
Auslogics BoostSpeed 12
Pro version ?
Plus the last time i used driver updater it updated my pc then restarted it and it would not boot up no matter what i tried, I then had to reinstall windows with a backup. not used driver updater since.
Thank You.
Sudden switch to No Error Mode
I am using a ASUS N73S system with W10-64, Windows standard firewall and Kaspersky antivirus. All softwares are update and everything runs fine.
Working with IExplorer and Edge in parallel, suddenly the screen turns black and the system is blocked during 3 or 4 seconds, then the screen pops up again and the system reactivates in Without Error Mode. I have to reboot and the system reactivate in Normal Mode. This looks like a stability problem, but maybe a compatibility case between edge and ie.
Thank you to help me
Пропали значки из трея
Cannot use keyboard Up and Down arrows in Windows Clipboard History since today.
Earlier i selected the copied contents using arrow keys and used Enter key to enter the data, Now its not working, i need to use mouse every single time.
wont install new drivers
cant install nvidia gforce and driver booster wont update my drivers ie: game drivers for windows
game crash
cleaning done or not done?
Each time when I do a manual clean of: one click scanner, reg cleaner, duplicate file finder, deep disk cleaner, the page displays the following message.
This has not been cleaned since (date), Also, immediately after the internet optimiser has been run and optimised and rebooted it requires another scan to optimise straight after the reboot.
I looks as if the program does all the tasks required but does not record it as being done.
Your comments appreciated
Bill
Problem with VPN
Blank Windows Security Window
Suggestions wecome. My understanding is that Defender is operating but not lettting me see that it is operating. I wish I could be sure of that.
Suggestion / Idea
This is not a question for you, merely an idea for additional software functionality. I think it could be a great feature.
I sometimes look at Event Logs for my Windows 10 PC, usually filtering out 'Information' type logs.
There are often events there that are errors. Sometimes these errors are happening thousands of times a day, but they happen silently and do not appear to impact my day to day work. But they must be hurting performance.
But if there was an 'Analyse Event Log Results' feature in BoostSpeed, which provided helpful feedback to users about those errors and suggested ways of resolving them, I would definitely use it.
I bet it would not be easy though!
Best regards
Phil
I am not getting full gigabit speed on only my computer.
Hello all, happy holidays!
Unfortunately things aren't so smooth for me right now, I have just installed gigabit internet in my home, but I'm having the problem that my computer is not getting the full speed. I know the modem is putting out 940 average, because I have an eero Pro connected to it and that reads 940, and my dad's laptop on wired connection also reads 900 average, it is only my computer that is not getting the full speed on the same wired connection. It gets on average 250 Mbps, sometimes stooping lower and upload is always the same speed at 40 Mbps up.
I am using a Cat6 cable not 5 ft from the standard xfinity modem, I have reset my network settings and flushed my DNS. I have used DNS Benchmark to make a custom list of the fastest DNS Servers for me. I have downloaded and check my ethernet adapter with Intel PROSET and everything checks out. My adapter has a max speed of 1 Gbps (Intel(R) Ethernet Connection (2) I218-V). I have run virus and malware scans and came out clean. I have tried disabling windows firewall and running only ipv4 or 6. Among other things I have tried A LOT of troubleshooting and my knowledge has limited me at this point
Недавние
Как сделать так, чтобы сохранялись последние книги в Файл/Последние? Происходит автоматическая очитска и ничего не остаётся.
Каждый день всё пусто.
Super slow opening of files and folders
For the last week I am having issues opening any file or folder. It seems like it takes a minute or 2 for them to open. It is driving me nuts.
I have tried most of the items in https://windowsreport.com/file-explorer-slow-windows-10/ with no effect.
Anything you may provide would be appreciated!
Thank you
Robert
Windows Settings
I can't access my Windows Settings. When I try to access it the page shows and then goes away. Can your software fix this issue?
Failed Windows Updates
(2019-10 Cumulative Update for Windows 10 Version 1903 for x64-based Systems (KB4517389) - Error 0x80070002)
My system is a Lenovo Think Centre w/I5 Processor.(M91)
Brightness not working proper0lly
its been a while my brightness doesnt work at the 2 and 3 level i will experience this issue every time when i sign in with a microsoft account doesnt matter what windows laptop it is in every laptop when i sign in with microsoft the brightness doesnt works on 2 and 3 level
plz help
tnx
speaker icon
after todays update the sound icon when clicked upon appears ok but as soon as the mouse is moved to adjust the sound the icon disappears
What can I do to bring it back to normal?
By the way: the subcategory is too limited to direct the problem to the right technician in the correct dept.
Microsoft Store no longer works or appears under apps!
Recently I was having problems with Microsoft Store that it kept giving an error message when updating apps (can't remember which one eaxctly). So I reset it as per advice on various forums but since then Microsoft Store has disappeared from Apps and no longer works at all!
Please help / advise.
Thanks,
Simon