1859 questions

After Auslogics did some repairs, alot doesnt work

I really cant type out the problems im having all because there are so many... I just got a Performace Scan message from Auglogics as I am typing this message stating "its been 6 days since your last scan" but im afraid to run anything on auglogics. I need a Tech that knows computers very well to remote connect to my laptop and see if they can fix some if not all of these problems that came about. I will list some of the problems I am encountering but first I want to say that everthing did work before. I used to be a windows insider but now my diagnostic data is set to basic and i cant chage it to full.. In yellow, at the top of the windows settings page it now says that I do not have authorization or this setting is being controlled by your organizer. I dont have an Organizer. Ive never seen that Yellow Font orginazation control lock or what ever it is, ever before until about a week ago when i ran the last scan with auglogics. Its not just on that Diagnostic sending part, I find that I get that controlled by my orginazation lock out on all kinds of settings and controls. I work as a heavy equipment machinery driver and work doesnt even have comptures, im not in school or connected to any school account.. I bought my own brand new laptop about 3 months ago, its connected on my home network Optimum Internet and my outlook account isnt attached to anything but my Xbox One X and like i said it was never there before... I cant type in any Windows app or the task bar without having to hit the windows key + R and enter C:\Windows\System32\ctfmon.exe and then it works, but needs to be done everytime i turn my laptop on... I used to always have my Samsung Fit 64 gig tiny flat USB and my SDXC 64 gig 170Mbps read/write card set to enable read and write and catch. Not Readyboost.. but now i cant do that. both USB and SDXC are all over the place.. I have gigabyte speed from optimum and yet my whole computer runs slow... I cant type in the search bar and get my apps show up, or update, or power plan. nothing... AND for some reason, Ive NEVER had 4 accounts. when i turn my laptop on i can only log into my account like normal. but then when you look at the account users, theres administrator, then there is like 3 accounts of my name.. i dont know what to do

1432 views
May 06, 2020 at 04:31 PM

defrag ssd

you product wants to defrag and tweak my ssd is this safe?

1225 views
May 06, 2020 at 09:29 AM

Запуск Виндовс

Доброго времени суток. После пользования вашим продуктом у меня стало чтото не то с загрузкой виндовс. Сначала все идет нормально. Загрузка биоса. Потом заставка загрузки виндовс. Потом у меня экран отключается и в таком состоянии минут 15. Экран от ПК не получает никаких сигналов. Как мне это отключить? Что бы была нормальная загрузка рабочего стола после заставки загрузки виндовс? Это началось сразу же после использование Ауслоджик Буст Спида. Откат системы я сделать не могу.

1433 views
May 06, 2020 at 05:50 AM

Démarrage anormal

Bonjour,
J'utilise une unité ASUS N73SV sous Windows10 qui me donne entière satisfaction.
Logiciel de sécurité Kaspersky, Firewall Windows, Analyses périodiques par Auslogics Anti-Malware.
Aucune attaque virale jusqu'à aujourd'hui.
Depuis un an environ la touche habituelle de demarrage - au dessus du clavier à droite - ne fonctionne plus; le pc ne demarre pas.
Pour demarrer le pc, il faut appuyer sur la touchei se trouve tout au dessus du clavier à gauche, donc la symetrique de l'autre.
Mais au lieu d'activer directement Windows, cela active le Bios (son de boot tres fort) puis Windows (son de boot normal).
J'ai entrepris plusieurs fois de comprendre et réparer mais sans succès.
Je souhaite revenir à un fonctionnement normal.
Merci de votre aide.
Kind regards,
Jean Farny
1178 views
May 03, 2020 at 04:35 PM

Auslogics registry cleaner

Can certain categories be excluded when using registry cleaner?
REASON: after using registry cleaner I get an error message when I open MSMoney. I can correct this using Money setup, but registry cleaner does something to reverse my setup correction.

System: Windows 7 Home Premium

1385 views
Apr 29, 2020 at 10:41 PM

Отвалился BlueTooth

Добрый день
на обоих моих ноутбука пропал блутус. Возможно что то позволил исправить программе не проконтролировав. Как включить блютус снова? В скрытых девайсай его вижу. Система предлагаетпереустановить драйвер, но дело явно не в этом.

1460 views
Apr 29, 2020 at 06:00 AM

Здравствуйте, программа Auslogics не запускается вместе с включением компьютера, как исправить?

Здравствуйте, программа Auslogics не запускается вместе с включением компьютера, как исправить?

1265 views
Apr 29, 2020 at 01:50 AM

Disco duro se encuentra al 100%

Hola, ultimamente he notado que mi disco duro se encuentra al 100% y las aplicaciones se abren lento, cuando tenia windows 7 no me pasaba esto supongo que es por el sistema operativo tengo windows 10 pro, ¿habra una solucion para bajar el uso del disco ?

1268 views
Apr 28, 2020 at 02:59 AM

POST interruption

What could be the problem when most of the time during Boot on Message "Warning System Boot fail or post interruption".

Press continue or press del to load bios setup.

1209 views
Apr 27, 2020 at 08:51 AM

Why auslogics boostspeed can't solve this ?

Hello. I'm a regular gamer, but when I play a game, no matter which one, my computer always crashes. Everyday, for months. I have used boostspeed 11 many times to fix this, but despite what Auslogics promised, my computer is no more stable than before. Nothing has changed. So I’m wondering what it pays to pay for software that promises to take care of our computer’s system, if it’s just basic operations that don’t solve anything. If nothing changes, I will not renew my subscription. If you need information about my hardware, don't hesitate to ask me. Thank you. Sincerely, Arnaud

1289 views
Apr 27, 2020 at 08:32 AM

Malware

How can I minimize the picking up of malware by using your toolkit?

1711 views
Apr 25, 2020 at 10:50 PM

Temperature

I am using Windows 8.1. Is there a provision in BoostSpeed 11, for setting the Disk/Processor Temperature at which the PC will switch off?

1409 views
Apr 22, 2020 at 04:00 PM

ms-resource: ProductName を取り除きたい

Windows10 バージョン 2004 (OSビルド 19041.207)
スタートメニューのその他グループに

"ms-resource: ProductName"  を取り除きたい


このアプリは開かず、アンインストールもできない

2877 views
Apr 22, 2020 at 01:56 PM

sudden shutdown

why is my pc suddenly shuts down without warning every 10 to 20 minutes

1331 views
Apr 20, 2020 at 08:19 AM

OpenAL32.dll.

Пожалуйста посоветуйте файл OpenAL32.dll. последствия

1663 views
Apr 19, 2020 at 06:26 AM

Windows 10 logon password via Auslogics

Hello!
I am not new to Aulogics - great product! However, I am a new Aulogics 11 user. In Aulogics, in trying to bypass Windows 10 Logon on my Lenovo, I believe the password that was pre-autofilled may have been incorrect? I chose by-pass Windows logon, however when my laptop restarts the first User screen tells me my Password is incorrect. How do I fix this in Aulogics? Any help would be appreciated! ~Catherine Trager

Content hidden to protect privacy

1514 views
Apr 18, 2020 at 05:41 PM

Повышенное потребление ресурсов

Периодически всплывает уведомление о повышенном потреблении ресурсов. По клику открывается Task Manager, из информации в котором я понимаю только, что процессор загружен на 100%, оперативная память тоже. Я и сам замечаю, что компьютер часто тормозит и процессор нагревается до 50 градусов.
Компьютер новый (моноблок Lenovo, W10), программ в автозагрузке не более десяти. Прежний моноблок, которому более пяти лет с W 8.1, на котором установлено гораздо больше программ, ведёт себя гораздо резвее.
И что со всем этим делать? В Task Manager не вижу каких-либо инструментов. Уж не сама ли ваша программа Auslogics Boost Speed 11 тормозит систему?

1011 views
Apr 18, 2020 at 05:17 PM

Кэш второго уровня

Здравствуйте, в прошлых версиях была возможность через Tweak Manager включить исплользование кэша втрого уровня. В 11 версии неполучается найти данную функцию. Подскажите как это сделать.

1423 views
Apr 18, 2020 at 10:31 AM

System Restore

Desktop just started on off when sitting in sleep mode, A tried to update Microsoft Windows 10, took update, Still on off multi. times daily B, tried System restore tells me could not preform System Restore Still on ,off mode , C What setting in resuce center would fix this System Restore problem.s all from same date around System 3 or 4 from same date close to restore point date. Is Boostspeed 11 causing this problem

1412 views
Apr 16, 2020 at 06:59 PM

help needed

Hi, I don't think it's about you, but if you can help me I'll be very grateful.
i have two devices
1.micro sd 16GB apacer
2.flash memory 16GB apacer
these two device now is WRITE PROTECTED and i have download every tools and tricks exist in world for flash these but no one responding.
now pls pls pls pls pls pls help me in my country there is no official represent from apacer or others pls help me tnx a lot and i very respect u and ur works and apps

respectful.TOOFAN

1351 views
Apr 16, 2020 at 08:42 AM

Malware

can auslogics check for malware?
C:\Program Files\Supremo Tribunal Federal\Sistema Operacional Microsoft® Windows®\ subfolder

this just showed up in my startup today - never saw it before and from what I read can be OK or can be an infection

I need to know if it is OK to keep it or try to remove it

1217 views
Aug 26, 2020 at 02:08 PM

Print spooler issues

My computer keeps dropping its print spooler. I reload windows and it works until I install Auslogics Speed Booster. Any fixes?

1216 views
Jun 26, 2020 at 08:49 PM

Formula not working correctly

when formulating a two page expression, the first page is not reading the second expression. I have given you the two formulas - I would hopefully like to have this sorted; if possible.

the first one should denote the year: In this case 2020

=IF(MONTH($A$5)<>MONTH($A$5-(WEEKDAY($A$5,1)-($I$2-1))-IF((WEEKDAY($A$5,1)-($I$2-1))<=0,7,0)+(ROW(A7)-ROW($A$7))*7+(COLUMN(A7)-COLUMN($A$7)+1)),"",$A$5-(WEEKDAY($A$5,1)-($I$2-1))-IF((WEEKDAY($A$5,1)-($I$2-1))<=0,7,0)+(ROW(A7)-ROW($A$7))*7+(COLUMN(A7)-COLUMN($A$7)+1))

The second shouldgive me the first day of the year:

=IF(MONTH($A$5)<>MONTH($A$5-(WEEKDAY($A$5,1)-($I$2-1))-IF((WEEKDAY($A$5,1)-($I$2-1))<=0,7,0)+(ROW(A7)-ROW($A$7))*7+(COLUMN(A7)-COLUMN($A$7)+1)),"",$A$5-(WEEKDAY($A$5,1)-($I$2-1))-IF((WEEKDAY($A$5,1)-($I$2-1))<=0,7,0)+(ROW(A7)-ROW($A$7))*7+(COLUMN(A7)-COLUMN($A$7)+1))

Question, is this even possible?

1216 views
Oct 01, 2020 at 01:28 AM

Режим сна

Ноутбук периодически внезапно сам уходит в режим сна, хотя данную возможность я выключил. Происходит в любое время и в любой момент. Хоть в браузере сижу, хоть в игры играю. Резко гаснет экран и ноутбук оказывается в режиме сна из которого потом приходится выходить
1216 views
Jul 30, 2020 at 10:34 AM

stop removing saved information during cleanup

how to keep boostspeed from removing my passwords and form data information from edge browser. I saw it once, but like everything, I cant find it now (LOL)

Thank you

1216 views
Jan 21, 2020 at 07:38 PM

Windows 11 beta

Hi,
Next week I'll be updating to Windows 11 will I still be able to use Boostspeed on that OS without doing any damage?
1215 views
Jun 16, 2021 at 06:58 PM

Flash drives

All of my flash drives are not recognized, irrespective of the USB port, I use. How do I reactivate the USB ports so as to recognized the flash drives?

1215 views
May 20, 2020 at 07:16 AM

free space

im trying to get this game called genshin impact, however it says i need more space despite the fact that i deleted everything that came to mind whether it would be pictures or games, i even tried to uninstall things from settings
i need help, apparently theres nothing else i can delete but i know for sure there is another way

1215 views
Jan 15, 2021 at 07:33 AM

Regarding default setting problem

I am unable to set WORD 2016 as my default app, i tried all the solutions i came accross but could not do it, clarify and resolve it kindly

1214 views
Jun 16, 2020 at 03:55 AM

Malware install failure error

see attached. This happens every time. Chrome, Brave will not allow. Edge gives error.

1214 views
Feb 21, 2021 at 10:49 PM

Printer not connecting

Hello!
I recently used Auslogics to clean my computer. I believe I went to "optimize" to perform a deeper clean up. The question came up at the end to clean which I clicked on. My printer is now showing default, I cannot get it to connect to my internet either by the "wizard" or manually. HELP!!!
1214 views
Oct 01, 2020 at 03:56 PM

Logging in to dashboard

How can i put a shortcut on Start page (or Taskbar) to log in to my Auslogics dashboard?

1214 views
Jan 15, 2020 at 10:40 PM

logiciels office

Les logiciels office ne se lancent plus
1213 views
Aug 25, 2020 at 03:08 PM

Uninstall manager

Можно вернуть в Uninstall manager
количество установленных программ? куда то пропали...
Спасибо.

1212 views
Mar 09, 2020 at 08:59 PM

BootSpeed 12 installation software

I just bought an additional laptop can I use my paid subscription and install it in my computer

1212 views
Mar 02, 2021 at 09:47 AM

Диск содержит ошибки

При сканировании Disk Doktor пишет что диск C содержит ошибки но при исправлении и глубоком исправлении все равно пишет диск содержит ошибки. Другие программы Auslogics пишут что все диски впорядке. Это ошибка программы или что ?
1211 views
Feb 21, 2021 at 04:08 PM

Unable to Send / Receive emails

Since installing your software I am now unable to receive email via MS Outlook -

1211 views
Apr 08, 2020 at 06:38 PM

No sound after connectin phone with bluetooth

Sometimes i like to connect my phone to my pc with bluetooth so i can listen music while playing games (is easier to change music or control volume). Today i connected the phone to pc, it shows is connected but when i play music i can t hear anything in pc`s speakers. I opened task manager, and i saw that Bluetooth User Suppor Service is stopped and i can t start it. I click start but nothing happends. Please help
1210 views
Dec 15, 2020 at 09:45 PM

Microsoft Storeが 無くなってしまいました。

BoostSpeed11を インストール後 設定 操作してみた所 Storが グレー表示になり アクセス出来なくなりました。
レスキュ-から 回復を試みましたが 復旧出来ない状態です。

1210 views
Oct 23, 2019 at 11:57 PM

POST interruption

What could be the problem when most of the time during Boot on Message "Warning System Boot fail or post interruption".

Press continue or press del to load bios setup.

1209 views
Apr 27, 2020 at 08:51 AM