Windows refusing access as administrator
ユーザー制御
デスクトップのショートカットから、ブーストスピード開きません。タスクバーからなら開くのに。ユーザー制御ウィンドが出てダメです。ドライバーアップデーターのショートカットも同じです。また、時々ですが、ブーストスピードが開いた時に、すべての画面が白紙画面になります。
アカウントとかセキュリティーの調整をしてみたのですが変わりません。インストールしなおしても変わりません。セキュリティソフトが干渉でもしているのでしょうか?何か良い方法はないでしょうか、お願いします。
Could not activated my license
Program not registered
Thank you
Activating Software Problem
I have now come to the end of my tether with this piece of software. I have been sent a Registration Code because the software I purchased on the 14 Dec 2021 keeps on asking me to Activate Pro Version. I removed the programme from my computer and started afresh. The programme dowloaded and the after putting in my Licence Key it advised me that the programme was registered. However, there is white writing on a green backgroumd in the bottom right hand corner stating: Activate Pro Version (when pressed advises what you get with the Pro version - which I have already purchased!) I have added this as an attachement on an MS Word doc.
Carl Bruce
BOOT SPEED PRO
I HAVE RENEWED MY BOOT SPEED SUBSCRIPTION BUT I CAN'T PERFORM CERTAIN FUNCTIONS I AM ASKED TO TAKE PRO VERSION WHILE I HAVE ALREADY PAID THE BASIC VERSION HOW TO UPGRADE TO THE PRO VERSION WITHOUTPAYING THE 50 EUROS MORE ?
LICENCE N°:
THANK YOU
Aktivation not Possibel
I did try to activate the pro version.
Reslult: The product has been activated
But in realatiy is the green botten still here and its not working as should when activated.
Regards
Kurt
Auslogics 12 is blocked by Windows 10
My Auslogics 12 is blocked by Windows 10. What can I do to fix this problem? And I cannot to set my Auslogics license key. I have just a basic version of programm now.
Программа была заблокирована администратором
About Auslogics BoostSpeed 12
Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします
Hirosuke Kajiyama
Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします
License key ライセンスキー:
Auslogics BoostSpeed 12
Pro version ?
Plus the last time i used driver updater it updated my pc then restarted it and it would not boot up no matter what i tried, I then had to reinstall windows with a backup. not used driver updater since.
Thank You.
Admin. Blocked
Thank You
James Elder
Не активируется программа при наличии лицензионного ключа
activation Boostspeed
I have been using Boostspeed pro for years, and now the software only opens in the free version, even when I copy the activation key received in December by email.
A window appears, saying "Registered software", yet the software remains in free version.
Can you help me solve this problem?
Integrator.exe wird blockiert
"Diese App wurde aus Sicherheitsgründen blockiert.
Ein Administrator hat die Ausführung dieser App blockiert
Weitere Informationen erhalten Sie vom Administrator.
Integrator.exe"
Ich bin selbst der Administrator meines Systems, sehe aber keine Möglichkeit, den Fehler zu beheben.
Bitte helfen Sie mir.
Pro Version
Auslogics 12
versione Pro
Buonasera volevo chiedere se avevo acquistato versione registrata normale o Versione Pro perche nonostante il seriale che mi e' stato inviato
Poi ho notato all'inizio un notevole consumo di risorse CPU.......poi molto dopo si e' Abbassata anche il 70%
FIX: bdservicehost high cpu / memory usage
I have this problem. Can you tell me a solution? https://windowsreport.com/bdservicehost-high-usage/
my hard drive is WDC W10 EZEX
An error occurred while loading Library.dll
When loading Auslogics Disk Defragmenter, I get the following message box:
Auslogics Disk Defrag 9
An error occurred while loading Library.dll.
Error code: 0x0000007E
Error message: The specified module could not be found.
I've tried to uninstall the program, but get the message box:
Runtime error at (180:3568):
Exception 'EAuslogicsIntItException" at address 0049E613
Thanks
Nick
built in Dell Inspiron laptop Realtek microphone
My microphone has stopped working and doesn't seem recognised ny Windows 10. Zoom is displaying a picture rather than video.
ms-resource: ProductName を取り除きたい
Windows10 バージョン 2004 (OSビルド 19041.207)
スタートメニューのその他グループに
"ms-resource: ProductName" を取り除きたい
このアプリは開かず、アンインストールもできない
Time Lag with using both mouse and keyboard; Slow Computer
At this point, I'm about ready to pull all my hair out. I can't seem to find the cause. The only finding has been:
BIOS and chipset behavior
________________________________________
The highest measured SM BIOS interrupt or other stall was 127 microseconds. This is considered poor behavior. Your system may have difficulty handling multimedia in real-time and may be subject to unexpected stutters and unresponsive behavior.
Ron
Why I am seriously upset
Why woud you duplicate file finder delete the original video file from my computer instead of the empty file with the same name in itunes and leave me with all my videos gone and a bunch of movies I can not use or watch in itunes
That was hours of work for me and now I have nothing left and have to start all over and that was over 100 movies I downloaded
How is that a helpful program a duplicate means duplicate in every way not just in name
Bought a TP link Bleutooth usb
Dear Support,
I have bought a TP link UB400 USB and inserted it in the USB port immediatly i had connection.
Then i update the drivers for windows from your package i bought two or 3 days ago and it updated the driver to Bleusolell drivers.
fter nothing seems to work anymore on bluetooth aspects.
Also the CSR software downloaded give me u huge pain because i could almost not removed it anymore.
I need the old driver from windows apperently that is not bluesoleil as this is not responding.
The Bleutooth usnb device i can see in the list of devices but will not react.
Thank you fore th help as suh.
regards Rob.
wondpws 10 don't boot
My windows 10 home can not boot after a registry cleanup. It was stopped at the laptop logo and not going thro. Later attenpt to boot shows bluescreen with "BAD SYSTEM CONFIG INFO".
I have tried BCD fix, but got "access denied". I tried rewrite config, but my Regback is empty with no backup reg files. Please advise how can I get the thro?
Thank you.
ESENT Help.
svchost (3804, R, 98) SRUJet: An attempt to create the file "C: \ WINDOWS \ system32 \ SRU \ SRUtmp.log" failed with the following system error: 5 (0x00000005): "Access is denied.". File creation will fail with error -1032 (0xfffffbf8).
Notifications
I can not find a way to BLOCK New Auslogics Notifications of upgrades . I have blocked Registry notifications tring to end pop ups of Auslogic Up-grades . IF you can not seem to have FREE upgrades for presently purchased Auslogics 11 , then simply place your up grades into an Auslogics 12 and STOP bugging members with you desiring money for upgrades . Your Subcategory answer question makes NO sense ! This is an Auslogics 11 Programming delima ,none of the subcategory comment shown above have nothing to do with Auslogics 11 , that I know of, as of yet.
I cannot reinstall ScanSnap software
I have had a Fujitsu S1500 ScanSnap scanner on my computer since I got it. Something happened lately (probably a refresh of Win10) and the program, ScanSnap Manager, stopped opening automatically when I turned on the scanner (connected by USB). After trying every remedy I could think of, I uninstalled the ScanSnap software, and cleaned the registry, figuring that I would reinstall the software from the original disk.
But even though I've done everything I know how to do to wipe the computer free of any traces of the original program, as you can see from the attached screen shot, the installer is not letting me install the program as it thinks there's a version already on the computer. There's nothing in installed programs, nor the registry, related to this program. And I force uninstalled it too. At this point I'm unable to use my scanner. Help!
Note that the subcategory of this question is not "Get Help" but your UI won't let me submit a question without choosing something, and the program in question is not in the dropdown list becuase it's already been uninstalled.
MSFS
Chaque fois que je fais un nettoyage en profondeur, je dois réinstaller MSFS.
Comment parametrer Bootspeed 11 pour éviter cela?
Bien à vous
Driver power state failure
Driver power state failure , this is not getting ressolved even after updating all drivers of the system. Tried various methods listed on the internet, changed settings many times. Even Auslogic couldn't solve it.
I could not update the Drvers
I have problems on Diver Updater: I could not update my old drivers with the update drivers from you, When I do the mouse pad is not working any more. I have to restore the system. I need your help to update the Drivers.
Drivers
Your driver updater for Wifi 6 AX200 from the driver updater program, cause HUGE throughput issues....
Tests went from 40mbit to 900+mbit (maxing out my connection) when connected to wifi AX.
Thanks
GENERAL QUESTION
what is the difference between Auslogics Disk Defrag Ultimate AND Auslogics Disk Defrag Pro???”