Cannot activate
WHEN I TRY TO USE THIS VERSION, IT STATES I HAVE ONLY THE FREE VERSION, AND WHEN I TRY TO USE THE PRO VERSION THE WEBSITE WANTS ME TO PAY FOR IT AGAIN,BUT SAYS IT IS REGISTERED ALL OK
FOR EXAMPLE WHEN I TRY TO DEFRAG, IT ONLY DEFRAGS, I CAN NO LONGER DEFRAG AND OPTIMSE MY DISCS AS BEFORE
THIS IS REALLY FRUSTRATING AS I HAVE BEEN A LONG TIME SUBSCRIBER
PLEASE HELP.
Not able to install an upgrade for Boostspeed 12.2.0.0
After completion of the upgrade software, the Help box remains showing my Version as 12.2.0.0
проблема с регистрацией
До недавнего времени проблем не возникало. Последние несколько дней слетает активация, каждый раз при открытии программы предлагает активировать ПРО версию, после ввода ключа выскакивает окно, говорящее, что программа активировани, версия ПРО, но в самой программе никаких изменений нет, кнопка "Активировать ПРО" не исчезает, и в "помощи" ропять то же самое. Что делать, как решить проблему?
Drive C: - Reports Disk has errors
Despite the statement that the report provides details on disk error check AND REPAIR RESULTS, the report simply states that my C:Drive has errors.
There is no indication as to what the errors are or that they have been repaired; on the contrary the errors have not been identified nor have they apparently been repaired.
How do I find out what the errors are and how do I repair them?
Regards, Harry McBride
System Information Report
ID: 05
Name: Reallocated sector count
Value: 134
Worst: 134
Threshold: 140
Raw Data: 522
Status: Prefail
What does this mean and how do I fix it?
Lizenz
Delete wrong user
Want to delete wrong choise
Unable to activate Auslogics Bootspeed 12 PRO Version
Windows refusing access as administrator
ユーザー制御
デスクトップのショートカットから、ブーストスピード開きません。タスクバーからなら開くのに。ユーザー制御ウィンドが出てダメです。ドライバーアップデーターのショートカットも同じです。また、時々ですが、ブーストスピードが開いた時に、すべての画面が白紙画面になります。
アカウントとかセキュリティーの調整をしてみたのですが変わりません。インストールしなおしても変わりません。セキュリティソフトが干渉でもしているのでしょうか?何か良い方法はないでしょうか、お願いします。
Could not activated my license
Program not registered
Thank you
Activating Software Problem
I have now come to the end of my tether with this piece of software. I have been sent a Registration Code because the software I purchased on the 14 Dec 2021 keeps on asking me to Activate Pro Version. I removed the programme from my computer and started afresh. The programme dowloaded and the after putting in my Licence Key it advised me that the programme was registered. However, there is white writing on a green backgroumd in the bottom right hand corner stating: Activate Pro Version (when pressed advises what you get with the Pro version - which I have already purchased!) I have added this as an attachement on an MS Word doc.
Carl Bruce
BOOT SPEED PRO
I HAVE RENEWED MY BOOT SPEED SUBSCRIPTION BUT I CAN'T PERFORM CERTAIN FUNCTIONS I AM ASKED TO TAKE PRO VERSION WHILE I HAVE ALREADY PAID THE BASIC VERSION HOW TO UPGRADE TO THE PRO VERSION WITHOUTPAYING THE 50 EUROS MORE ?
LICENCE N°:
THANK YOU
Aktivation not Possibel
I did try to activate the pro version.
Reslult: The product has been activated
But in realatiy is the green botten still here and its not working as should when activated.
Regards
Kurt
Auslogics 12 is blocked by Windows 10
My Auslogics 12 is blocked by Windows 10. What can I do to fix this problem? And I cannot to set my Auslogics license key. I have just a basic version of programm now.
Программа была заблокирована администратором
About Auslogics BoostSpeed 12
Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします
Hirosuke Kajiyama
Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします
License key ライセンスキー:
Auslogics BoostSpeed 12
Pro version ?
Plus the last time i used driver updater it updated my pc then restarted it and it would not boot up no matter what i tried, I then had to reinstall windows with a backup. not used driver updater since.
Thank You.
SSD
I signed up and paid my money, got my License Key. Downloaded version 10 and now it acts like I can't use it for SSD's and wants me to buy the "exact same thing again". WTH is going on???
Order #
Система
issue while booting
When I turn on my pc,
after windows logo a blank screen comes for about 3-4 min.
then a "please wait" loop comes which lasts for about 1 min.
My PC: It's a prebuilt "ACER Veriton series."
Microsoft Teredo Tunneling adapter not working
Unwanted sound
Update
Can't install update
On two occasions, I attempted to install the updated version of Boost Speed 11. Each time I got the Blue Screen of Death. That's unacceptable for the $50 I paid for the full registered version. Please advise a fix.
windows update slows startups
AusLogics BoostSpeed
When using AusLogics BoostSpeed of any version (from version 5 to the latest) in the Microsoft Windows 10 Enterprise 2016 LTSB operating system, the reflection of available networks in the system tray disappears when you click on the network icon (both Wi-Fi and local). As well as a keyboard input indicator. Moreover, when uninstalling AusLogics BoostSpeed, this problem is not resolved. Which eliminates the use of AusLogics BoostSpeed on laptops with this system. How can this be fixed?
BoostSpeed wird permanent von Avira gelöscht
Sehr geehrte Damen und Herren,
mein Antivirusprogramm "Avira Antivirus Pro" stuft BoostSpeed permanent als Bedrohung ein und löscht es.
Gestern wurde BoostSpeed 3x gelöscht!
Hierfür hätte ich gerne eine Lösung von Ihnen erfahren.
Mit freundlichen Grüßen
Prösch
My system repair data
I bought your Boostspeed 11 and let it have its way. But now all my system repair data are gone.
???
Regards,
J.P. (Jan) Clifford
Want the operating system files checked and to be fully operational.
Check to see that all critical and necessary files are completely intact and functional like SFC /Scannow, and any other method you know of, so that when I go to re-install Windows 10 it will go smoothly and without a hitch! An example is that I can no longer use the pin I assigned to windows it just stopped working one day. And I've always had problems with the startup files from all versions of windows. Like my 1st install of windows 10 went bad because of the User.dat files getting corrupted, I couldn't repair windows, and I doubt that I could run restore and it would work. And I don't want to install windows 10 until I know it's going to run correctly.
I do nothing to corrupt files but they always seem to get screwed up by the operating system.
Thanks, L8R
werid big files on my D drive
see file.
Idk what is it?
Should I deleat it or keep it?
Auslogics BootSpeed 11の設定をdefaultに戻す方法を教えて下さい
Auslogics BootSpeed 11を使い始めてまだ1週間程度ですが、あまり知識がないのにいろいろな設定を自己流で行ったので、これが最適な設定か分からなくなりました。
そこで、いちど設定をデフォルトの出荷時状態に戻すほうほうを教えて下さい。設定は再度考えて必要最小限に戻すつもりです。
toggle "attempt to change DNS" notification.
This appears to be a notification issue. I frequently switch my network usage to wireless, from ethernet, and back again. How can I configure Speedboost 11 NOT to notify me each time this occurs? Thank you!
Windows 10 Update Error Code 0x80070bc9
Do you have a tool to address this and repair Windows Update software or whatever is wrong?
Xтобы Auslogics BoostSpeed 12 не отключал службу «Служба сенсорной клавиатуры и панели рукописного ввода».
Здравствуйте. у меня Auslogics BoostSpeed 12, программа шикарная. Но есть одни минус, когда она производит сканирование то отключается «Служба сенсорной клавиатуры и панели рукописного ввода». Эта служба нужна не только для компьютеров с сенсорными экраном, она отвечает за то, чтобы выводить слава по мере ввода букв, как в Android и IOS. Я печатаю ногой, и мне эта функция очень сильно облегчает печатать тексты в Windows 10. Чтобы Auslogics BoostSpeed 12 не отключала Службу сенсорной клавиатуры и панели рукописного ввода, в настройках программы я вынужден отключать пункт «Продуктивность», а эта сильно урезать функционал. Поэтому прошу в дальнейших версиях исправить эту проблему, чтобы Auslogics BoostSpeed 12 не отключал службу «Служба сенсорной клавиатуры и панели рукописного ввода».
Александр
Something happen to this device after i ran internet optimization
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached
Please Help. I am beyond frustrated at this poing.
Mike
I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.