1897 questions
установить андройд 13
мой пк не видит нокиа 503- андройд самостоятельно установить не могу.прошу установить андройд 13 на нокиа 503 через ноутбоок самсунг R540 ОН ПОДКЛЮЧЕН ПО КАБЕЛЮ USB.
when i watch a clip on youtube or facebok ...it often restarts the clip and in most cases it starts from the beginning ...,help pls
when i watch a clip on youtube or facebok ...it often restarts the clip and in most cases it starts from the beginning ...,help pls
wakeup problems
I dont turn off laptop at night. I run it with lid closed when in use.
I used to just move the mouse in the morning to wake it up, but not now.
I now have to open lid to wake it up and monitor shows large icons, clicking on Firefox gives a screen too big to use.
I then close lid to get the smaller icons that are usable.
Hitting the WIN key + P and choosing second screen only also fixes the icon size problem.
I went through all the 'wakeup' fixes I could find but to no avail.
There is a small chance this is a cat problem, I have several.
Any suggestions?
subcategory choices makes me think "windows" was wrong category to choose.
I used to just move the mouse in the morning to wake it up, but not now.
I now have to open lid to wake it up and monitor shows large icons, clicking on Firefox gives a screen too big to use.
I then close lid to get the smaller icons that are usable.
Hitting the WIN key + P and choosing second screen only also fixes the icon size problem.
I went through all the 'wakeup' fixes I could find but to no avail.
There is a small chance this is a cat problem, I have several.
Any suggestions?
subcategory choices makes me think "windows" was wrong category to choose.
Server use
Is Auslogics Registry Cleaner suitable for servers?
It seems to run perfectly according our testings on our spare server, but can it be considered as a suitable program?
We have searched internet and we did not find any registry cleaner, especially designed for servers.
Best Regards
Angelos Diakoumakos
It seems to run perfectly according our testings on our spare server, but can it be considered as a suitable program?
We have searched internet and we did not find any registry cleaner, especially designed for servers.
Best Regards
Angelos Diakoumakos
upgraging lost my registered status
Hi,
I upgraded my computer with a different motherboard, a new i7 cpu and new ddr4 memory, but my hard drives, my graphics card and sound card plus power supply are still the same. When I turned on my computer I see that my status went from registered to unregistered. How do I get it to be registered again. It's not a different computer, just upgraded.
Thanks,
Chris K.
I upgraded my computer with a different motherboard, a new i7 cpu and new ddr4 memory, but my hard drives, my graphics card and sound card plus power supply are still the same. When I turned on my computer I see that my status went from registered to unregistered. How do I get it to be registered again. It's not a different computer, just upgraded.
Thanks,
Chris K.
hard drive chattering all the time win 10 pro ?????
my hard drive keeps chattering windows 10 can you help??????
boostspeed tray icon
What is the little red dot that appears on your tray icon? When it appears, what does it mean? How do you get rid of the red dot?
Also, my subscription is expiring sson. I will renew if you can give me a discount/promo code. Thank you in advance. Scott
Also, my subscription is expiring sson. I will renew if you can give me a discount/promo code. Thank you in advance. Scott
Power options gone
I have problems Closing the lid does not work. I set it to sleep or shut down neither of them worked.When I tried to find a solutions
I entered a code to CMD and all my power plans resetted.The ones which auslogics set also gone the preset power plans.And when I set balanced again I have also have no slider on the battery icon to change it to left to battery save or right to better performance.
Now I have left with no power plans of auslogics and ultimate is gone too.Can I get them back or how ?
Can I get back my old battery icon slider when in balanced mode ?
Can I fix the closing the lid action and make laptop sleep when i close it ?
I entered a code to CMD and all my power plans resetted.The ones which auslogics set also gone the preset power plans.And when I set balanced again I have also have no slider on the battery icon to change it to left to battery save or right to better performance.
Now I have left with no power plans of auslogics and ultimate is gone too.Can I get them back or how ?
Can I get back my old battery icon slider when in balanced mode ?
Can I fix the closing the lid action and make laptop sleep when i close it ?
HDD 100% in Task Manager
Здравствуйте.
У меня проблема с работоспособностью компьютера.
Загруженность диска 100% в диспетчере задач.
Обновлял драйвера черед Ваш Driver Updater, после чего компьютер стал дольше выполнять задачи.
Выполнил восстановление.
Запустил BoostSpeed13.
Вроде бы получилось настроить, и когда компьютер простаивает, то значения не поднимаются до 100%.
Но тем не менее, значения принимают, при выполнении задач.
Ищу решение по этому вопросу.
С уважением,
Максим
У меня проблема с работоспособностью компьютера.
Загруженность диска 100% в диспетчере задач.
Обновлял драйвера черед Ваш Driver Updater, после чего компьютер стал дольше выполнять задачи.
Выполнил восстановление.
Запустил BoostSpeed13.
Вроде бы получилось настроить, и когда компьютер простаивает, то значения не поднимаются до 100%.
Но тем не менее, значения принимают, при выполнении задач.
Ищу решение по этому вопросу.
С уважением,
Максим
frequent log offs
Windows 11 prro keeps logging me off. I have tried several fixes from internet, but nothing works. Pleassse help. Thank you, Charles
DSN resolution failing
I have an older PC and thus tought it would be good to get Auslogics Bootspeed 13
I did a scan and followed the recomendations
however I now regularily get the issue that the internet connection to my DNS server is gone
he tells me that the addr. cannot be resolved (see also screen shot in doc)
it seems to go away after a while, without me taking action? - but when it happens it hinders a lot.
could you please tell me that this can ideed be due to cleaning caches, optimizing settings though Bootspeed?
where to fix/repair?
not sure it is the Auslogic cleaning - but it started at the same time
I am using Proximus as provider in Belgium and have the Norton 360 suite installed
running windows 10 (PC seems a bit old to run W11, but it did the trick quite well - till recently :-( )
issue happens on WIFI and Cabled connection
I did a scan and followed the recomendations
however I now regularily get the issue that the internet connection to my DNS server is gone
he tells me that the addr. cannot be resolved (see also screen shot in doc)
it seems to go away after a while, without me taking action? - but when it happens it hinders a lot.
could you please tell me that this can ideed be due to cleaning caches, optimizing settings though Bootspeed?
where to fix/repair?
not sure it is the Auslogic cleaning - but it started at the same time
I am using Proximus as provider in Belgium and have the Norton 360 suite installed
running windows 10 (PC seems a bit old to run W11, but it did the trick quite well - till recently :-( )
issue happens on WIFI and Cabled connection
transfert photos depuis icloud
hi
depuis ce matin quand je telecharge mes photos depuis icloud elles sont dans un format different
extension heic
et je n'arrive plus a les lire
please i want to have a french answer ty
depuis ce matin quand je telecharge mes photos depuis icloud elles sont dans un format different
extension heic
et je n'arrive plus a les lire
please i want to have a french answer ty
Не работает веб-камера
После последней настройки, с помощью вашей программы у меня перестала работать веб-камера и микрофон в программе Zoom. Микрофон удалось включить путем рекомендации от Zoom разрешения доступа приложениям к микрофону. Но решения с включением веб-камеры нету. Как решить проблему?
AUTOMATION ERROR THE OBJECT INVOKED HAS DISCONNECTED FROM ITS CLIENTS RUN-TIME ERROR
PLEASE HELP!!!!!!! I INSTALLED A PROGRAM CALLED "QUANTUM RESONANCE MAGNETIC ANALYZER" ON COMPUTER EVERY THING INSTALLED FINE, IT CREATED A DESK ICON ETC... BUT WHEN I TRY TO OPEN THE PROGRAM UP THE MESSAGE IN THE SUBJECT ABOVE IS WHAT I KEEP GETTING. I TRIED EVERYTHING!!!!!!!!!!!!!!!! I RESTARTED THE COMPUTER, I DID THE SFL /SCANNOW THING, I DISABLED MY VIRUS PROTECTION, I UPDATED DRIVERS BUT NOTHING!!!!!!! IM TRULY AT A LOSS IM VERY FRUSTRATED BECAUSE I PAID OVER 100 DOLLARS FOR THE PROGRAM AND I CANT USE IT! SO CAN YOU PLEASE HELP? OR WILL I HAVE TO TRY TO SEND THE PROGRAM BACK? I HAVE HP COMPUTER WINDOWS 10 MICROSOFT THANK YOU! MY NAME IS KENNETH BINGHAM
Fonction "rechercher dans" en haut à droite des fenêtres windows 10
la fonction de recherche est totalement inactive. On ne peut rien inscrire dans la case prévue.
Критическая
критическая ошибка Web Camsc-13HDL 11939NUSB\ViD_2232&...... Ошибка пользователя Appication Error
Boostspeed Benachrichtigungsanzeigen
Hallo wertes Auslogics-Boostspeed-Team,
ich möchte gerne nach jedem Starten oder Neustarten meines PCs (Win10 Enterprise LTSC) angezeigt bekommen, wie lange das Starten dauerte. Diese Benachrichtigung wird mir bisher nur manchmal angezeigt oder wenn ich Boostspeed nach dem Hochfahren selbst starte; aber auch dann dauert es eine Weile, bis die Benachrifhtigung erscheint und auch hier erscheint sie nur manchmal.
Zudem möchte ich bitte gerne wissen, welche Taskscheduler und Hintergrundaufgaben von Microsoft Corporation ich im Auslogics Boostspeed Startup Manager deaktivieren kann, sodass das Windows dennoch fehlerfrei läuft; habt ihr hierfür eine "Pauschale"?
Vielen Dank vorab für eure Mithilfe.
Freundlichst, Wayseer
ich möchte gerne nach jedem Starten oder Neustarten meines PCs (Win10 Enterprise LTSC) angezeigt bekommen, wie lange das Starten dauerte. Diese Benachrichtigung wird mir bisher nur manchmal angezeigt oder wenn ich Boostspeed nach dem Hochfahren selbst starte; aber auch dann dauert es eine Weile, bis die Benachrifhtigung erscheint und auch hier erscheint sie nur manchmal.
Zudem möchte ich bitte gerne wissen, welche Taskscheduler und Hintergrundaufgaben von Microsoft Corporation ich im Auslogics Boostspeed Startup Manager deaktivieren kann, sodass das Windows dennoch fehlerfrei läuft; habt ihr hierfür eine "Pauschale"?
Vielen Dank vorab für eure Mithilfe.
Freundlichst, Wayseer
Driver Updater
Driver Updater won't scan. Says its blocked by Firewall. McAfee doesn't show that it's quareentined or blocked.
mcafee popouts stupid
how can disable or uninstall mcafee that seems to have been install by ms in windows10?
AusLogics BoostSpeed
When using AusLogics BoostSpeed of any version (from version 5 to the latest) in the Microsoft Windows 10 Enterprise 2016 LTSB operating system, the reflection of available networks in the system tray disappears when you click on the network icon (both Wi-Fi and local). As well as a keyboard input indicator. Moreover, when uninstalling AusLogics BoostSpeed, this problem is not resolved. Which eliminates the use of AusLogics BoostSpeed on laptops with this system. How can this be fixed?
My system repair data
Dear Auslogics,
I bought your Boostspeed 11 and let it have its way. But now all my system repair data are gone.
???
Regards,
J.P. (Jan) Clifford
I bought your Boostspeed 11 and let it have its way. But now all my system repair data are gone.
???
Regards,
J.P. (Jan) Clifford
problem after running resolve all issues early this morning
All devices listed under sound video and game controllers have yellow error triangles and when you open properties for each it shows "Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)" I have rebooted, uninstalled all and rebooted and nothing changes usb audio has red x and no audio output device is installed and usb camera says camera in use by another app. I have disconnected both after uninstalling in device manager, rebooted then plugged them back in all still come up with error triangles and audio / camera are not functioning.
Eliminate Devices to be scanned by the software.
When I do a maitenance scan I keep having to have problems with my Camera and microphone issues.
I have to avoid doing this be cause it creates problems and have to reinsatll my device.
I think others could have the same problem, it could be best, to have your software avoid touching devices alltogether.
Auslogics BootSpeed 11の設定をdefaultに戻す方法を教えて下さい
Auslogics BootSpeed 11を使い始めてまだ1週間程度ですが、あまり知識がないのにいろいろな設定を自己流で行ったので、これが最適な設定か分からなくなりました。
そこで、いちど設定をデフォルトの出荷時状態に戻すほうほうを教えて下さい。設定は再度考えて必要最小限に戻すつもりです。
Проблеммы при использовании виндовс 10
Добрый вечер!
У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.
Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.
Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.
Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.
У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.
Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.
Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.
Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.
pc unplugged ac adapter pc shuts down with battery charged at high percentage
my laptop has new battery, but when i unplug the AC adapter my laptop shuts down when it has a high charged percentage battery. how in settings to fix please.. oh, and my battery cannot be taken out in my asus pc
Can't install update
On two occasions, I attempted to install the updated version of Boost Speed 11. Each time I got the Blue Screen of Death. That's unacceptable for the $50 I paid for the full registered version. Please advise a fix.
Xтобы Auslogics BoostSpeed 12 не отключал службу «Служба сенсорной клавиатуры и панели рукописного ввода».
Здравствуйте. у меня Auslogics BoostSpeed 12, программа шикарная. Но есть одни минус, когда она производит сканирование то отключается «Служба сенсорной клавиатуры и панели рукописного ввода». Эта служба нужна не только для компьютеров с сенсорными экраном, она отвечает за то, чтобы выводить слава по мере ввода букв, как в Android и IOS. Я печатаю ногой, и мне эта функция очень сильно облегчает печатать тексты в Windows 10. Чтобы Auslogics BoostSpeed 12 не отключала Службу сенсорной клавиатуры и панели рукописного ввода, в настройках программы я вынужден отключать пункт «Продуктивность», а эта сильно урезать функционал. Поэтому прошу в дальнейших версиях исправить эту проблему, чтобы Auslogics BoostSpeed 12 не отключал службу «Служба сенсорной клавиатуры и панели рукописного ввода».
Александр
Delete"pagefile.sys"
Please edit a BAT file to clean up the C disk for me.
My Email"
Content hidden to protect privacy
"Thank You Very Much. I wanna delete"pagefile.sys"
Démarrage anormal
Bonjour,
J'utilise une unité ASUS N73SV sous Windows10 qui me donne entière satisfaction.
Logiciel de sécurité Kaspersky, Firewall Windows, Analyses périodiques par Auslogics Anti-Malware.
Aucune attaque virale jusqu'à aujourd'hui.
Depuis un an environ la touche habituelle de demarrage - au dessus du clavier à droite - ne fonctionne plus; le pc ne demarre pas.
Pour demarrer le pc, il faut appuyer sur la touchei se trouve tout au dessus du clavier à gauche, donc la symetrique de l'autre.
Mais au lieu d'activer directement Windows, cela active le Bios (son de boot tres fort) puis Windows (son de boot normal).
J'ai entrepris plusieurs fois de comprendre et réparer mais sans succès.
Je souhaite revenir à un fonctionnement normal.
Merci de votre aide.
Kind regards,
Jean Farny
J'utilise une unité ASUS N73SV sous Windows10 qui me donne entière satisfaction.
Logiciel de sécurité Kaspersky, Firewall Windows, Analyses périodiques par Auslogics Anti-Malware.
Aucune attaque virale jusqu'à aujourd'hui.
Depuis un an environ la touche habituelle de demarrage - au dessus du clavier à droite - ne fonctionne plus; le pc ne demarre pas.
Pour demarrer le pc, il faut appuyer sur la touchei se trouve tout au dessus du clavier à gauche, donc la symetrique de l'autre.
Mais au lieu d'activer directement Windows, cela active le Bios (son de boot tres fort) puis Windows (son de boot normal).
J'ai entrepris plusieurs fois de comprendre et réparer mais sans succès.
Je souhaite revenir à un fonctionnement normal.
Merci de votre aide.
Kind regards,
Jean Farny
toggle "attempt to change DNS" notification.
This appears to be a notification issue. I frequently switch my network usage to wireless, from ethernet, and back again. How can I configure Speedboost 11 NOT to notify me each time this occurs? Thank you!
cannot open links in OUTLOOK
I cannot open hyperlinks in Outlook. My system is always saying that opening isn't allowed.
Looking to solve that problem with all kind proposals I found on internet doesn't give satisfaction.
(also copying registerkeys from a anotrher computer succeeding to open that kind of links doesn't give the solution)
( all options of the Outlook-program are set as they are on the good-working PC. Also that wasn't giving a solution)
Both PC have Bitdefender Total Protectionb als Virusprotection, so this cannot be the origin of the problem.
Please can you help me : I'm searching to find a solution for more than a full year...
File in attachment : extension .reg was changer in .txt to permit the file to be sended.
Thanks on beforehand !
Jaak Valembois
Looking to solve that problem with all kind proposals I found on internet doesn't give satisfaction.
(also copying registerkeys from a anotrher computer succeeding to open that kind of links doesn't give the solution)
( all options of the Outlook-program are set as they are on the good-working PC. Also that wasn't giving a solution)
Both PC have Bitdefender Total Protectionb als Virusprotection, so this cannot be the origin of the problem.
Please can you help me : I'm searching to find a solution for more than a full year...
File in attachment : extension .reg was changer in .txt to permit the file to be sended.
Thanks on beforehand !
Jaak Valembois
key product W10PRO missed
Hi, I have AuslogicsBoostSpeed 11 licensed on 3 computers. 2 computers, the oldest, have windows 8.1 PRO. Newer computers have Windows 10 PRO. In the SOFTWARE-SYSTEM INFORMATION-OPERATING SYSTEM section the product key normally appears while on the PC with W10PRO the alphanumeric character string of the product key is covered with the capital B letters. I wanted to know why the code is hidden before it appeared. Thanks for the reply. Alex
My Windows 10 Pro version asks for activation
Hello,
I wonder why my Windows 10 Pro version, upgraded from Windows 8.1, asks for activation(---> go to settings ) since 2 weeks.
The notice pops up everytime I strart the laptop.
I have read that the OS might become unstable if not"activated"..
When checking, Windows is activated, and the key seems to be valid, but with a digital license "provided by "Your Organization""
Is there a way around it, without wiping the drive and install "new "Windows 10 Pro ? I did make a back up copy with Auslogics Bitreplica on a WD drive though..
Thank you for any answer that may show a solution.
Many regards,
Robert Soer
<robertsoer@gmail.com>
I wonder why my Windows 10 Pro version, upgraded from Windows 8.1, asks for activation(---> go to settings ) since 2 weeks.
The notice pops up everytime I strart the laptop.
I have read that the OS might become unstable if not"activated"..
When checking, Windows is activated, and the key seems to be valid, but with a digital license "provided by "Your Organization""
Is there a way around it, without wiping the drive and install "new "Windows 10 Pro ? I did make a back up copy with Auslogics Bitreplica on a WD drive though..
Thank you for any answer that may show a solution.
Many regards,
Robert Soer
<robertsoer@gmail.com>
Malwarebytes Shuts Down Auslogics BoastSpeed11 and Quaranteens it
Malwarebytes Shuts Down Auslogics BoastSpeed11 and Quaranteens it. I have to shut down Malwarebytes and then reinstall Auslogics BoastSpeed11. Then during reinstallation I get a number of errors but the Auslogics BoastSpeed11 does reinstall but this can not be good for the stability of the system. What to do ?
New in blog
See allRecommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7