1897 questions
Auslogic Defrag Issue
Defrag hung up on file C:\$Extend\$UsnJml:$J
Went from 3.8% to 13.30% completed and took over 22 hours as you can see in the screenshot attachment.
How can I get defrag around this issue so it can complete the optimization?
Thank you
Dennis Miller
Content hidden to protect privacy
P.S. Why isn't Auslogics a subcategory option?
Laptop slow on startup
Hi there,
I have a new laptop with a high spec. However, for the first hour each day, it runs as slowly as an old 486 machine, then suddenly it catches up with itself and runs superbly all day.
I've checked everything:
Programs in the Start menu
ESET and OneDrive behaviour
Updates behaviour
BIOS settings
Everything I can think of and a hundred things I've learned about...
I've uninstalled some of the programs, but now I'm thinking I should uninstall everything and reinstall Windows 10.
Any ideas before I try the Windows 10 reinstall?
NOTES (1) I did try the upgrade to Windows 11 when I first got the machine, however, I didn't like it and went back to Windows 10; it was slow in the short time that I ran Windows 11 too, so I don't konw if that means something, like maybe it's a hardware issue? (2) It was a demo machine in the store where I bought it.
I have a new laptop with a high spec. However, for the first hour each day, it runs as slowly as an old 486 machine, then suddenly it catches up with itself and runs superbly all day.
I've checked everything:
Programs in the Start menu
ESET and OneDrive behaviour
Updates behaviour
BIOS settings
Everything I can think of and a hundred things I've learned about...
I've uninstalled some of the programs, but now I'm thinking I should uninstall everything and reinstall Windows 10.
Any ideas before I try the Windows 10 reinstall?
NOTES (1) I did try the upgrade to Windows 11 when I first got the machine, however, I didn't like it and went back to Windows 10; it was slow in the short time that I ran Windows 11 too, so I don't konw if that means something, like maybe it's a hardware issue? (2) It was a demo machine in the store where I bought it.
Auslogics BoostSpeed 12について
「Auslogics BoostSpeed Pro12」「Auslogics Driver Updater」と「Disk Defrag Ultimate」のボタンがありますが、インストールすると別途、料金が発生するのでしょうか？
ignoring cache and thumbnails
Hi guys,
I want BS 12 to ignore clearing/deleting image thumbnails and chrome cahe.
How do I do that?
Please let me know
Regards
Luis
I want BS 12 to ignore clearing/deleting image thumbnails and chrome cahe.
How do I do that?
Please let me know
Regards
Luis
freeing Memory usage
Hi Guys,
I have noticed some apps reserves too much memory for itselfs like Google Chrome,
is it possible to get Auslogic Bootspeed 12 to free some of the memory on a regular basis, for example when it reaches 85% of usage?
also it would be nice to improve memory and CPU by disabbling things that are not required when we want to get out more performance from our PC,
The BS12 RAM and CPU optimization seems to be going into that direction, but require a little bit of more control over processes?
I have noticed some apps reserves too much memory for itselfs like Google Chrome,
is it possible to get Auslogic Bootspeed 12 to free some of the memory on a regular basis, for example when it reaches 85% of usage?
also it would be nice to improve memory and CPU by disabbling things that are not required when we want to get out more performance from our PC,
The BS12 RAM and CPU optimization seems to be going into that direction, but require a little bit of more control over processes?
Windows search indexer
Hi there,
Windows search indexer seems to be taking forever to finish.
I have restarted the process, limited the number of files to index and even disable the AV to allow indexer to index faster.
But after a while it comes back and keeps eating away between 60% to 24% of CPU
Any fix for that? runing on (win11 64 bits.
Windows search indexer seems to be taking forever to finish.
I have restarted the process, limited the number of files to index and even disable the AV to allow indexer to index faster.
But after a while it comes back and keeps eating away between 60% to 24% of CPU
Any fix for that? runing on (win11 64 bits.
Right Click opens very slowly
Right click on file explorer options (such as copy) takes forever to load. Right click on any file takes forwver to load options.
Tried to purchase Boostspeed Pro but website would not advance to chaeckout?
Tried to purchase Boostspeed Pro but website would not advance to chaeckout?
I am unable to switch to keyboard Chinese Input Method after using Auslogics BootstSpeed
After using the Auslogics BootstSpeed and the function of cleaning the Registry files, I found that I am not able to switch back to Chinese input method anymore and I can only type in English. I tried to type the hotkey "Left Ctrl +Shift", nothing happened. I tried "Ctrl + Space" or "Win + Space", also nothing happended. The small icon at shows "EN" at the bottom right corner was disappeared (see attached).
I tried to find the file "ctfmon.exe" and excute, but it doesn't work. I tried to add this command at the startup, it also doesn't work.
I tried to delete the language pack and reinstall, it also doesn't work.
The only moment that I can see the langauge menu comes out again is that when I was in the situation of "User Account Control" when the computer requires administrator status to run some program (see attached).
I am pretty desperate and really need your help. Thank you!
I tried to find the file "ctfmon.exe" and excute, but it doesn't work. I tried to add this command at the startup, it also doesn't work.
I tried to delete the language pack and reinstall, it also doesn't work.
The only moment that I can see the langauge menu comes out again is that when I was in the situation of "User Account Control" when the computer requires administrator status to run some program (see attached).
I am pretty desperate and really need your help. Thank you!
internet hızlandırma yaptıgımda hızım düşüyor
internet hızlandırma yaptıgımda hızım düşüyor 50 mbits fiber internetim var manuel ayarları bilmiyorum yardımcı olurmusunuz acaba?
boite mail
Bonjour j aurais besoin que vous m aidiez , je peux ouvrir ma boite mail depusi plusieurs jours la page était a a s'ouvrir donc je me deconnectais je remettais mon identifiants et mot de passe mais ce matin pu rien l ordi ne me donne pu la page poiur mettre ces infos martine_viellet@sfr.fr
Auslogics Boostspeed 12
My computer is a 64 bit machine which can run 32 bit programs. My computer is running Boostspeed 12 using 32 bit versions of all its programs instead of the 64 bit version. Is this the reason why my computer is taking over an hour to startup in the morning with the disk using 93% to the usual 100% all the time? Or, is the problem due to too much disk thrashing since it appears that all the startup programs start up immediately instead of being staggered per the scheduler? This problem started when I had to uninstall Boostspeed 12 and reinstall it per the Auslogics support person.
Gah. Cannot access Report
I have not been able to view any of the reports in the Auslogics software. I just get a blank window in Foxfire.
Auslogics BoostSpeed software itself
I have BoostSpeed perform Dashboard, Disk Defrag, Protect. Internet Optimizer and other checks by schedule. All is good.
However, directory "c:\ProgramData\Auslogics\BoostSpeed\12.x\Reports" becomes cluttered with .html, .xml and other reports produced by these various check tools.
How can I set BoostSpeed to automatically clean up after itself by deleting ancient reports over some arbitrary age? There's about a Gig of files in this directory on this machine and some 3Gb on another.
However, directory "c:\ProgramData\Auslogics\BoostSpeed\12.x\Reports" becomes cluttered with .html, .xml and other reports produced by these various check tools.
How can I set BoostSpeed to automatically clean up after itself by deleting ancient reports over some arbitrary age? There's about a Gig of files in this directory on this machine and some 3Gb on another.
random shut down of my laptop
recently my sony vaio laptop strted shutting of randomly. can you help.
Sound Fades In and Out
With hte update of Windows t0 the sound on my computer fades in and out. I have used the troubleshooter; however, it is of no help at all.
I have a HP Pavilion 15t-n200 CTO Notebook PC and HP is of no use any longer as my warranty has run out and as my computer is almost seven years old it probably cannot be renewed. My laptop has a Conexant Audio driver HD,
I am considering buying a new computer but before spending $1000, I want to be sure there isns't something I can do with the one I have.
I have a HP Pavilion 15t-n200 CTO Notebook PC and HP is of no use any longer as my warranty has run out and as my computer is almost seven years old it probably cannot be renewed. My laptop has a Conexant Audio driver HD,
I am considering buying a new computer but before spending $1000, I want to be sure there isns't something I can do with the one I have.
Windows 11
I have a Lenova Yoga 510 14ISK i7-6500
Apparently my machine is not compatible for the Windows 11 upgrade.
What do I need to do to make it compatible?
Apparently my machine is not compatible for the Windows 11 upgrade.
What do I need to do to make it compatible?
WiFi keeps disconnecting
For about 9 months now often when I click to go from one webpage or website to another my Wi-Fi disconnects. I either must reconnect via the Internet icon or when I run the Windows Network Diagnostics it always tells me that "The default gateway is not available" and it fixes it. I have run all sorts of 'FIXES' found on the internet but still not fixed.
Up to date Windows 10, Firefox & Norton 360. Was doing the same thing when I used AVAST.
Up to date Windows 10, Firefox & Norton 360. Was doing the same thing when I used AVAST.
My system repair data
Dear Auslogics,
I bought your Boostspeed 11 and let it have its way. But now all my system repair data are gone.
???
Regards,
J.P. (Jan) Clifford
I bought your Boostspeed 11 and let it have its way. But now all my system repair data are gone.
???
Regards,
J.P. (Jan) Clifford
problem after running resolve all issues early this morning
All devices listed under sound video and game controllers have yellow error triangles and when you open properties for each it shows "Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)" I have rebooted, uninstalled all and rebooted and nothing changes usb audio has red x and no audio output device is installed and usb camera says camera in use by another app. I have disconnected both after uninstalling in device manager, rebooted then plugged them back in all still come up with error triangles and audio / camera are not functioning.
Eliminate Devices to be scanned by the software.
When I do a maitenance scan I keep having to have problems with my Camera and microphone issues.
I have to avoid doing this be cause it creates problems and have to reinsatll my device.
I think others could have the same problem, it could be best, to have your software avoid touching devices alltogether.
Auslogics BootSpeed 11の設定をdefaultに戻す方法を教えて下さい
Auslogics BootSpeed 11を使い始めてまだ1週間程度ですが、あまり知識がないのにいろいろな設定を自己流で行ったので、これが最適な設定か分からなくなりました。
そこで、いちど設定をデフォルトの出荷時状態に戻すほうほうを教えて下さい。設定は再度考えて必要最小限に戻すつもりです。
Проблеммы при использовании виндовс 10
Добрый вечер!
У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.
Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.
Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.
Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.
У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.
Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.
Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.
Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.
pc unplugged ac adapter pc shuts down with battery charged at high percentage
my laptop has new battery, but when i unplug the AC adapter my laptop shuts down when it has a high charged percentage battery. how in settings to fix please.. oh, and my battery cannot be taken out in my asus pc
Démarrage anormal
Bonjour,
J'utilise une unité ASUS N73SV sous Windows10 qui me donne entière satisfaction.
Logiciel de sécurité Kaspersky, Firewall Windows, Analyses périodiques par Auslogics Anti-Malware.
Aucune attaque virale jusqu'à aujourd'hui.
Depuis un an environ la touche habituelle de demarrage - au dessus du clavier à droite - ne fonctionne plus; le pc ne demarre pas.
Pour demarrer le pc, il faut appuyer sur la touchei se trouve tout au dessus du clavier à gauche, donc la symetrique de l'autre.
Mais au lieu d'activer directement Windows, cela active le Bios (son de boot tres fort) puis Windows (son de boot normal).
J'ai entrepris plusieurs fois de comprendre et réparer mais sans succès.
Je souhaite revenir à un fonctionnement normal.
Merci de votre aide.
Kind regards,
Jean Farny
J'utilise une unité ASUS N73SV sous Windows10 qui me donne entière satisfaction.
Logiciel de sécurité Kaspersky, Firewall Windows, Analyses périodiques par Auslogics Anti-Malware.
Aucune attaque virale jusqu'à aujourd'hui.
Depuis un an environ la touche habituelle de demarrage - au dessus du clavier à droite - ne fonctionne plus; le pc ne demarre pas.
Pour demarrer le pc, il faut appuyer sur la touchei se trouve tout au dessus du clavier à gauche, donc la symetrique de l'autre.
Mais au lieu d'activer directement Windows, cela active le Bios (son de boot tres fort) puis Windows (son de boot normal).
J'ai entrepris plusieurs fois de comprendre et réparer mais sans succès.
Je souhaite revenir à un fonctionnement normal.
Merci de votre aide.
Kind regards,
Jean Farny
Can't install update
On two occasions, I attempted to install the updated version of Boost Speed 11. Each time I got the Blue Screen of Death. That's unacceptable for the $50 I paid for the full registered version. Please advise a fix.
Delete"pagefile.sys"
Please edit a BAT file to clean up the C disk for me.
My Email"
Content hidden to protect privacy
"Thank You Very Much. I wanna delete"pagefile.sys"
toggle "attempt to change DNS" notification.
This appears to be a notification issue. I frequently switch my network usage to wireless, from ethernet, and back again. How can I configure Speedboost 11 NOT to notify me each time this occurs? Thank you!
Xтобы Auslogics BoostSpeed 12 не отключал службу «Служба сенсорной клавиатуры и панели рукописного ввода».
Здравствуйте. у меня Auslogics BoostSpeed 12, программа шикарная. Но есть одни минус, когда она производит сканирование то отключается «Служба сенсорной клавиатуры и панели рукописного ввода». Эта служба нужна не только для компьютеров с сенсорными экраном, она отвечает за то, чтобы выводить слава по мере ввода букв, как в Android и IOS. Я печатаю ногой, и мне эта функция очень сильно облегчает печатать тексты в Windows 10. Чтобы Auslogics BoostSpeed 12 не отключала Службу сенсорной клавиатуры и панели рукописного ввода, в настройках программы я вынужден отключать пункт «Продуктивность», а эта сильно урезать функционал. Поэтому прошу в дальнейших версиях исправить эту проблему, чтобы Auslogics BoostSpeed 12 не отключал службу «Служба сенсорной клавиатуры и панели рукописного ввода».
Александр
cannot open links in OUTLOOK
I cannot open hyperlinks in Outlook. My system is always saying that opening isn't allowed.
Looking to solve that problem with all kind proposals I found on internet doesn't give satisfaction.
(also copying registerkeys from a anotrher computer succeeding to open that kind of links doesn't give the solution)
( all options of the Outlook-program are set as they are on the good-working PC. Also that wasn't giving a solution)
Both PC have Bitdefender Total Protectionb als Virusprotection, so this cannot be the origin of the problem.
Please can you help me : I'm searching to find a solution for more than a full year...
File in attachment : extension .reg was changer in .txt to permit the file to be sended.
Thanks on beforehand !
Jaak Valembois
Looking to solve that problem with all kind proposals I found on internet doesn't give satisfaction.
(also copying registerkeys from a anotrher computer succeeding to open that kind of links doesn't give the solution)
( all options of the Outlook-program are set as they are on the good-working PC. Also that wasn't giving a solution)
Both PC have Bitdefender Total Protectionb als Virusprotection, so this cannot be the origin of the problem.
Please can you help me : I'm searching to find a solution for more than a full year...
File in attachment : extension .reg was changer in .txt to permit the file to be sended.
Thanks on beforehand !
Jaak Valembois
key product W10PRO missed
Hi, I have AuslogicsBoostSpeed 11 licensed on 3 computers. 2 computers, the oldest, have windows 8.1 PRO. Newer computers have Windows 10 PRO. In the SOFTWARE-SYSTEM INFORMATION-OPERATING SYSTEM section the product key normally appears while on the PC with W10PRO the alphanumeric character string of the product key is covered with the capital B letters. I wanted to know why the code is hidden before it appeared. Thanks for the reply. Alex
Malwarebytes Shuts Down Auslogics BoastSpeed11 and Quaranteens it
Malwarebytes Shuts Down Auslogics BoastSpeed11 and Quaranteens it. I have to shut down Malwarebytes and then reinstall Auslogics BoastSpeed11. Then during reinstallation I get a number of errors but the Auslogics BoastSpeed11 does reinstall but this can not be good for the stability of the system. What to do ?
My Windows 10 Pro version asks for activation
Hello,
I wonder why my Windows 10 Pro version, upgraded from Windows 8.1, asks for activation(---> go to settings ) since 2 weeks.
The notice pops up everytime I strart the laptop.
I have read that the OS might become unstable if not"activated"..
When checking, Windows is activated, and the key seems to be valid, but with a digital license "provided by "Your Organization""
Is there a way around it, without wiping the drive and install "new "Windows 10 Pro ? I did make a back up copy with Auslogics Bitreplica on a WD drive though..
Thank you for any answer that may show a solution.
Many regards,
Robert Soer
<robertsoer@gmail.com>
I wonder why my Windows 10 Pro version, upgraded from Windows 8.1, asks for activation(---> go to settings ) since 2 weeks.
The notice pops up everytime I strart the laptop.
I have read that the OS might become unstable if not"activated"..
When checking, Windows is activated, and the key seems to be valid, but with a digital license "provided by "Your Organization""
Is there a way around it, without wiping the drive and install "new "Windows 10 Pro ? I did make a back up copy with Auslogics Bitreplica on a WD drive though..
Thank you for any answer that may show a solution.
Many regards,
Robert Soer
<robertsoer@gmail.com>
New in blog
See allRecommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7