1859 questions
Intel (R) management
Avast pro detecte que Intel (R) management n'est pas a jour nouvelle version 2428.6.2.0 du 10 juillet disponible. Auslogics ne voit pas cette mise a jour. pourquoi ?
Bluetooth option gone after Win10Pro install
I updtaed from Win8.1 to Win10 now I have noe bluetooth option. Help
Low FPS in large group settings.
I have a pretty decent computer that I had built 5 years ago for online gaming. Whenever I am in a large group setting with 15+ people I get significant FPS loss down to 10-15 FPS. It makes it impossible to play competently and affects my performance drastically in such settings so much so to the point that groups don't want me joining them because it is such a hindrance. My gaming laptop that was significantly cheaper by about $4,000 runs the same game more smoothly in these settings with 15+ people. I would really like to get to the bottom of what is causing this to happen so I can play competently and progress with my team.
Auslogics BoostSpeed extrem langsam
Nach dem scan mit BoostSpeed 13 starte ich die Auflösung.
Das läuft anfangs noch ganz gut bis es zu den Browserspuren kommt.
Dann werden die etwa 300000 gefundenen Spuren im Sekundentakt heruntergezählt. Nach mehreren Stunden Laufzeit wird das zunehmend langsamer.
Ich muss dann abbrechen sonst wird das nie fertig.
Mache ich da etwas falsch oder ist das ein Software Problem?
Grüße
Dieter Krause
Das läuft anfangs noch ganz gut bis es zu den Browserspuren kommt.
Dann werden die etwa 300000 gefundenen Spuren im Sekundentakt heruntergezählt. Nach mehreren Stunden Laufzeit wird das zunehmend langsamer.
Ich muss dann abbrechen sonst wird das nie fertig.
Mache ich da etwas falsch oder ist das ein Software Problem?
Grüße
Dieter Krause
Eliminate Popups
What software is recommended to eliminate popups on my PC. The popups are not from programs on my PC.
Wi-Fi Connection Issue with 802.11N Adapter
Dear Auslogics Support,
I am facing a significant problem with my computer's Wi-Fi connection, and I would appreciate your assistance.
Problem Details:
My computer's Wi-Fi adapter is 802.11N.
My computer connects to my phone's Wi-Fi hotspot without any issues, but it cannot connect to my home Wi-Fi network (Airtel broadband).
The error message I receive is "Can’t connect to this network" when attempting to connect to my home Wi-Fi.
Three days ago, it connected to the home Wi-Fi for a short time, but I received a warning stating that my Wi-Fi network uses an older security standard that’s being phased out. After following some troubleshooting steps from YouTube, I am no longer able to connect at all to my home Wi-Fi.
My other devices (phones, etc.) connect to the home Wi-Fi without any issues, and my Wi-Fi dongle works fine when connecting to my phone’s hotspot.
Steps I’ve Already Taken:
Resetting my network settings.
Flushing the DNS and resetting Winsock.
Attempted various fixes from online tutorials but none have worked so far.
Could you please help me diagnose and resolve this issue so I can connect to my home Wi-Fi?
Thank you for your support.
I am facing a significant problem with my computer's Wi-Fi connection, and I would appreciate your assistance.
Problem Details:
My computer's Wi-Fi adapter is 802.11N.
My computer connects to my phone's Wi-Fi hotspot without any issues, but it cannot connect to my home Wi-Fi network (Airtel broadband).
The error message I receive is "Can’t connect to this network" when attempting to connect to my home Wi-Fi.
Three days ago, it connected to the home Wi-Fi for a short time, but I received a warning stating that my Wi-Fi network uses an older security standard that’s being phased out. After following some troubleshooting steps from YouTube, I am no longer able to connect at all to my home Wi-Fi.
My other devices (phones, etc.) connect to the home Wi-Fi without any issues, and my Wi-Fi dongle works fine when connecting to my phone’s hotspot.
Steps I’ve Already Taken:
Resetting my network settings.
Flushing the DNS and resetting Winsock.
Attempted various fixes from online tutorials but none have worked so far.
Could you please help me diagnose and resolve this issue so I can connect to my home Wi-Fi?
Thank you for your support.
Windows 11
Bonjour!
Mon PC est sous Windows 10 version 22H2.
Comment faire pour le passer sous Windows 11 ?
Merci de votre réponse.
Philippe
Mon PC est sous Windows 10 version 22H2.
Comment faire pour le passer sous Windows 11 ?
Merci de votre réponse.
Philippe
duplicates and empty files, pictures, programs, etc
how do i go about cleaning up my pc's empty, non existant and duplicate files, programs, videos, etc
default #344 in the library DLL COMCTL32.dll Yandex browser
How can I restore #344 in the library DLL COMCTL32.dll - Yandex browser? Thanks!
Screen blackout
While watching a video for a long time, I suddenly experience a system blackout and it's been going for a month now, what can I do about this?
startet nicht
Blaue fenster mit Fehler code =OXC000000f
Auslogics BootSpeed 13 gibt es als Iso Datei ????
Auslogics BootSpeed 13 gibt es als Iso Datei ????
Microsoft programs not responding
How do I fix Microsoft not responding error? this applies to any MS program I open eg Excel, Word, Edge etc. I have tried many different suggestions from the web. What I really need is a definitive answer.
Why have I never received my paid for PRO edition
I paid for the PRO Edition some time ago it would NEVER LOAD so I have been using the FREE Version
WHERE IS MY PRO ONE THAT I PAID FOR AND NEVER RECEIVED?
i HAVE EMAILD BEFORE WITH NO ANSWER
So I just gave up!!!!!!!!!!!!!!!!!!!!!
The activation file sent never worked
Product Name: Duplicate File Finder - 6.3.0.0
Reference Id: ASH150723-5799-45167
Machine Name: DESKTOP-P617G0M
Machine Id: E30CFD250369631872E7B03DD54A099F
Google Activation Code HWSJAZO7WWUK2WDPFCMW6HOU2MBRXBVK
WHERE IS MY PRO ONE THAT I PAID FOR AND NEVER RECEIVED?
i HAVE EMAILD BEFORE WITH NO ANSWER
So I just gave up!!!!!!!!!!!!!!!!!!!!!
The activation file sent never worked
Product Name: Duplicate File Finder - 6.3.0.0
Reference Id: ASH150723-5799-45167
Machine Name: DESKTOP-P617G0M
Machine Id: E30CFD250369631872E7B03DD54A099F
Google Activation Code HWSJAZO7WWUK2WDPFCMW6HOU2MBRXBVK
Disabling a deleted App
Hello,
How do I disable and uninstall an already deleted app from my laptop? I made the mistake of deleting the app when I should have uninstalled it. I've followed every instruction from Youtube. I downloaded BoostSpeed and cleaned up some registry files with the app's name. The App's name is FineShare FineCam. It still appears on Chrome as a virtual camera option. The app does not appear under ''Uninstall Manager''.
How do I disable and uninstall an already deleted app from my laptop? I made the mistake of deleting the app when I should have uninstalled it. I've followed every instruction from Youtube. I downloaded BoostSpeed and cleaned up some registry files with the app's name. The App's name is FineShare FineCam. It still appears on Chrome as a virtual camera option. The app does not appear under ''Uninstall Manager''.
Security Center in Vista
I am having issues with the nonfunctioning security center in Windows Vista 32 bit / desktop I KNOW , I am unsupported !!! Maybe you can help ?
Постоянная загруженность диска на 100%
Добрый день!
Диск постоянно работает на 100% в диспетчере задач, что замедляет работу системы
В чем может быть проблема?
Auslogics 12 Downloading
I hate being such a software web idiot. Its a shame with this being a 21st century of Knowledges and we still have such a night mare internet system.After emailing you all and Mcafee and numerous deletions of safety's and various uploads and downloads and turn this off and reboots , finally I got Auslogics 12 Boostspeed fully downloaded with no errors or failiers to download. I guess , I see how grand , I am sure it works.
deleted activation informations of windows10 pc
I installed Auslogics bootSpeed 12 Pro, and after first scan, reboot windows 10 pc(Dell XPS 13 9505).
I was obtained next messages. Maybe other sofware's Activation informations were destroyed.
（1）C:\ProgramData\Stardock\Fences3\License.sig was deleted.
The first massage is that reactivate fences 3. (Activation code is neaded)
（2）In the case of Auslogics driver updater, my activation code exceeded the limited number of activation.
And the costomer service replied me by mail that they cannot refresh my activation code.
（3）Next massge window opened that I rejister again Sound Blaster of Creative Teclonogy co.
(4)From now on, what do I do to prevent missing activation informations of my Windows10 pc.
I was obtained next messages. Maybe other sofware's Activation informations were destroyed.
（1）C:\ProgramData\Stardock\Fences3\License.sig was deleted.
The first massage is that reactivate fences 3. (Activation code is neaded)
（2）In the case of Auslogics driver updater, my activation code exceeded the limited number of activation.
And the costomer service replied me by mail that they cannot refresh my activation code.
（3）Next massge window opened that I rejister again Sound Blaster of Creative Teclonogy co.
(4)From now on, what do I do to prevent missing activation informations of my Windows10 pc.
Internet explorer
I don't use IE can I uninstall it as there are many items that will attach to it example is Roboform (password manager) and I wonder if IE contributes to ecess bagage.
Error mesage
I recently installed Microsoft Office 2019 on my Win 10 computer. Each time I use your Bootspeed 11 software, and when I access my Office 2019 software, I get an error message "Operatng system is not presently configured to run this application". What can I do to correct this? I am reluctant to use Auslogics software if it continues to prevent me from accessing my MS office software. Please advise. Thank you.
Unable to make screen lighter or darker
I don't remember what I did when I used the Auslogics BoostSpeed 11 free version. I can't recover the previous windows versions, because they were deleted. I went to the recovery center and it didn't help me with retrieving my lost files. Prior to trying this software, I was able to control the brightness of my screen. I have tried to load the HP graphics, and it says that my computer doesn't meet the requirements.
Проблеммы при использовании виндовс 10
Добрый вечер!
У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.
Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.
Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.
Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.
У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.
Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.
Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.
Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.
C922 Pro stream webcam
After initial total scan of my system the webcam is not working anymore.
Any idea ??
Any idea ??
No Disk DeFrag menu option in Auslogics 10
I installed this today, paid $30.00 dollars for it (after using a free verison for years), and after one attemot at optimizing my SSD on my Acer Laptop, the prgram restarted after completion and when it did it no longer has the menu option to actually defrag anything. the only menus i have are "reports" "Portable version" "ask a question" and "auslogics store".
what's going on?
thanks,
Brian
My Computer is Running Very Slow and I cannot get this one Windows Update to Install- HELP
I work from home of course and my Lenovo is running extremely slow and making noise like it is trying to complete an update. I do have one update 2021-05 Cumulative Update for Windows 10 Version 20H2 for x86-based Systems (KB5003173) that everytime I try to install it is errors out. I have received two different error codes (0x8007007e), I ran the windows trouble shooter, and now I am receiving error code (0x8000ffff). I downloaded your Auslogics and did a full scan for all the free options you offer and still am receiving this error message and my PC is super slow
Недопустимое значение реестра при попытке открыть JPG файлы
Здравствуйте!
Не могли бы помочь со следующей проблемой.
После сканирования и устранения ошибок программой BootSPeed при попытке открыть файлы JPG кликом мышки появляется сообщение "Недопустимое для реестра значение".
Спсибо,
Валерий.
Logitech C920s
I have a Logitech C920s webcam. Everything was working perfectly fine until Wednesday evening. At that time I started doing a bunch of maintenance within BoostSpeed. Something in my system was changed, and now I get a BSOD whenever I boot my computer when the webcam is plugged in. If I remove the webcam from the USB port, then the computer boots fine.
I've run two different anti-virus programs (including your Anti-Malware) and I also have your driver updater. Plus I made sure that I have the latest version of Logitech's LogiCapture software. And it does not appear that there were any Windows updates (other than Defender) since last week.
So...at this point I cannot use my webcam and I'm fairly certain it was due to some change made within BoostSpeed.
Please help me fix this. Is there an audit log in BoostSpeed that shows what settings were changed?
I've run two different anti-virus programs (including your Anti-Malware) and I also have your driver updater. Plus I made sure that I have the latest version of Logitech's LogiCapture software. And it does not appear that there were any Windows updates (other than Defender) since last week.
So...at this point I cannot use my webcam and I'm fairly certain it was due to some change made within BoostSpeed.
Please help me fix this. Is there an audit log in BoostSpeed that shows what settings were changed?
Location in Privacy setting
I cannot switch Location on in privacy settings i have scoured the web and tried numerous "fixes" under Services and Registry to no avail i think it maybe something to do with the Administration profile login, I have tried creating another admin login "Test" but the problem persists, I have even upgraded to windows 10 Pro but still the issue is thier would appreciate a fix. I have attached a screen shot to assist with identification
Thank You
Thank You
Ipv4 and Ipv6 not connected
my Ipv4 and Ipv6 is showing it is not connected. ive tried a number of fixes including going to command prompts, ive tried going back to a restore point, however i keep getting an error message saying that files are corrupted and cannot be restored to a previous point. ive run windows trouble shooter, i get this error message 0x800f081f. even when i hard wire my computer using an ethernet cord, my internet does not remain on constantly, it will log me off the internet and back on multiple times. do you have a program that can clean up these window based errors, to be able to restore my computer? i believe the last update i got was 12-13-2020, the day prior to that, my wireless was working. anything you can suggest?
Recommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7