1859 questions
computer freezing a lot
I was having a lot of problems with programs and browsers closing, after I installed auslogic, it improved, but I was afraid of it being some deep virus, how can I know, I have the antivirus, but I still have my doubts, because the PC gave a improved, but you will know
Default browser issues
I set Chrome as Windows 11 default browser and Google as search engine Microsoft keeps changing broweser to Edge & Bing.
Can Auslogic Registry Cleaner detect and fix such unauthorised changes?
Can Auslogic Registry Cleaner detect and fix such unauthorised changes?
start up automatic repair comes up which keeps coming up forever
I have a problem with every time I start up automatic repair comes up which keeps coming up forever if I don't click F8 and click Disable forced Driver Signature! After I click F8 windows starts up and runs normally. what do i do this problem? Can you help me? Hope you have a solution for me.
With best regards
Peter Hansen
Content hidden to protect privacy
New download won't run
I downloaded the suggested new Auslogics Disk Defrag 11. Now it won't run. It says "The execution cannot proceed because AxComponetsVCL.bpl was not found. Reinstalling the program may fix this problem".
Not very happy about this.
Since I just completed "downloading and installing" the updated version, how the heck am I supposed to accomplish this?
How do I get back to the Defrag that worked?
Not very happy about this.
Since I just completed "downloading and installing" the updated version, how the heck am I supposed to accomplish this?
How do I get back to the Defrag that worked?
Lost files in Downloads folder ????
I've just done a action in bootspeed 13 after I downloaded update and it has wiped out ALL my files in my windows downloads folder so I am not very happy with this !!!! Is there anyway that I can recover these files ???? I'll leave my laptop switched on in the hope that I can get an answer from you to assist me in this recovery of the many files I have lost/
Thank you John Blair 10.31 UK time on 04July24.
Thank you John Blair 10.31 UK time on 04July24.
Dateiwiederherstelung
Ich finde die mit Auslogics BoostSpeed 13 wiederhergestellten Dateien auf meinem Computer nicht.
Perte souris et pavé tactile sur ASUS R702U
Bonjour,
A l'occasion d'une mise à jour des drivers, (Windows 10) la procédure s'est bloquée.
j'ai dû arrêter mon portable (CTRL ALT DEL).
Au redémarrage plus de possibilité de valider une action.
Plus de pavé tactile, plus de souris !
Comment pouvoir ré-utiliser mon portable ?
Je vous envoie cette question de mon poste fixe
Comment choisir une langue de contact par défaut; mon anglais est scolaire et ancien.
Merci de votre réponse.
Cordialement.
R CHAUVET
A l'occasion d'une mise à jour des drivers, (Windows 10) la procédure s'est bloquée.
j'ai dû arrêter mon portable (CTRL ALT DEL).
Au redémarrage plus de possibilité de valider une action.
Plus de pavé tactile, plus de souris !
Comment pouvoir ré-utiliser mon portable ?
Je vous envoie cette question de mon poste fixe
Comment choisir une langue de contact par défaut; mon anglais est scolaire et ancien.
Merci de votre réponse.
Cordialement.
R CHAUVET
Recherche de logiciel
Quels logiciel gratuit me conseillez-vous pour rendre mon PC plus performant rapide et un bureau attrayant
Autodesk Software
i had installed Autodesk Software on my computer and it didnt install well due to licence patching. I unistalled the software and tried to reinstall but the software wouldnt install.
i then purchased Auslogics Boostspeed 13 with the hope thta it will help me with removing all possible traces of the software but its not helping
i then purchased Auslogics Boostspeed 13 with the hope thta it will help me with removing all possible traces of the software but its not helping
PC shuts off
Why does my pc randomly shut off its not over heating because the temp says its fine and when turned on cpu and vga red light turn on and off
There is no Chinese in the language options
Chinese is not currently available in the language options. I kindly request your team to consider adding Chinese to the language library.
Use of optimizing tool
Greetings
I have a aquestion the Optimization tool I notice that when you click on it a bunch of sine wave patterns show up. Well what is the meaning of all this and how do I use it?
I have a aquestion the Optimization tool I notice that when you click on it a bunch of sine wave patterns show up. Well what is the meaning of all this and how do I use it?
Internet speed settings
Its really hard to believe that the internet speed settings for 5Mb/s are the same as for 900+Mb/s. And what about using AI inthis application?????
Remove from PC
I downloaded this program (360 Total Security) by mistake and now I can't remove it. It is hidden and Boostspeed can't find the file location.
defrag
why does it take up to 10 maybe 12 minutes before it shos what file it is scanning in defrag and even after scanning then recanning again it takes soo long
how do i disable background apps windows 11
is there a way to disable background process with auslogics boostspeed 13
Security Center in Vista
I am having issues with the nonfunctioning security center in Windows Vista 32 bit / desktop I KNOW , I am unsupported !!! Maybe you can help ?
Постоянная загруженность диска на 100%
Добрый день!
Диск постоянно работает на 100% в диспетчере задач, что замедляет работу системы
В чем может быть проблема?
Auslogics 12 Downloading
I hate being such a software web idiot. Its a shame with this being a 21st century of Knowledges and we still have such a night mare internet system.After emailing you all and Mcafee and numerous deletions of safety's and various uploads and downloads and turn this off and reboots , finally I got Auslogics 12 Boostspeed fully downloaded with no errors or failiers to download. I guess , I see how grand , I am sure it works.
deleted activation informations of windows10 pc
I installed Auslogics bootSpeed 12 Pro, and after first scan, reboot windows 10 pc(Dell XPS 13 9505).
I was obtained next messages. Maybe other sofware's Activation informations were destroyed.
（1）C:\ProgramData\Stardock\Fences3\License.sig was deleted.
The first massage is that reactivate fences 3. (Activation code is neaded)
（2）In the case of Auslogics driver updater, my activation code exceeded the limited number of activation.
And the costomer service replied me by mail that they cannot refresh my activation code.
（3）Next massge window opened that I rejister again Sound Blaster of Creative Teclonogy co.
(4)From now on, what do I do to prevent missing activation informations of my Windows10 pc.
I was obtained next messages. Maybe other sofware's Activation informations were destroyed.
（1）C:\ProgramData\Stardock\Fences3\License.sig was deleted.
The first massage is that reactivate fences 3. (Activation code is neaded)
（2）In the case of Auslogics driver updater, my activation code exceeded the limited number of activation.
And the costomer service replied me by mail that they cannot refresh my activation code.
（3）Next massge window opened that I rejister again Sound Blaster of Creative Teclonogy co.
(4)From now on, what do I do to prevent missing activation informations of my Windows10 pc.
Internet explorer
I don't use IE can I uninstall it as there are many items that will attach to it example is Roboform (password manager) and I wonder if IE contributes to ecess bagage.
Unable to make screen lighter or darker
I don't remember what I did when I used the Auslogics BoostSpeed 11 free version. I can't recover the previous windows versions, because they were deleted. I went to the recovery center and it didn't help me with retrieving my lost files. Prior to trying this software, I was able to control the brightness of my screen. I have tried to load the HP graphics, and it says that my computer doesn't meet the requirements.
Error mesage
I recently installed Microsoft Office 2019 on my Win 10 computer. Each time I use your Bootspeed 11 software, and when I access my Office 2019 software, I get an error message "Operatng system is not presently configured to run this application". What can I do to correct this? I am reluctant to use Auslogics software if it continues to prevent me from accessing my MS office software. Please advise. Thank you.
Проблеммы при использовании виндовс 10
Добрый вечер!
У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.
Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.
Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.
Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.
У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.
Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.
Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.
Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.
C922 Pro stream webcam
After initial total scan of my system the webcam is not working anymore.
Any idea ??
Any idea ??
My Computer is Running Very Slow and I cannot get this one Windows Update to Install- HELP
I work from home of course and my Lenovo is running extremely slow and making noise like it is trying to complete an update. I do have one update 2021-05 Cumulative Update for Windows 10 Version 20H2 for x86-based Systems (KB5003173) that everytime I try to install it is errors out. I have received two different error codes (0x8007007e), I ran the windows trouble shooter, and now I am receiving error code (0x8000ffff). I downloaded your Auslogics and did a full scan for all the free options you offer and still am receiving this error message and my PC is super slow
No Disk DeFrag menu option in Auslogics 10
I installed this today, paid $30.00 dollars for it (after using a free verison for years), and after one attemot at optimizing my SSD on my Acer Laptop, the prgram restarted after completion and when it did it no longer has the menu option to actually defrag anything. the only menus i have are "reports" "Portable version" "ask a question" and "auslogics store".
what's going on?
thanks,
Brian
Недопустимое значение реестра при попытке открыть JPG файлы
Здравствуйте!
Не могли бы помочь со следующей проблемой.
После сканирования и устранения ошибок программой BootSPeed при попытке открыть файлы JPG кликом мышки появляется сообщение "Недопустимое для реестра значение".
Спсибо,
Валерий.
Logitech C920s
I have a Logitech C920s webcam. Everything was working perfectly fine until Wednesday evening. At that time I started doing a bunch of maintenance within BoostSpeed. Something in my system was changed, and now I get a BSOD whenever I boot my computer when the webcam is plugged in. If I remove the webcam from the USB port, then the computer boots fine.
I've run two different anti-virus programs (including your Anti-Malware) and I also have your driver updater. Plus I made sure that I have the latest version of Logitech's LogiCapture software. And it does not appear that there were any Windows updates (other than Defender) since last week.
So...at this point I cannot use my webcam and I'm fairly certain it was due to some change made within BoostSpeed.
Please help me fix this. Is there an audit log in BoostSpeed that shows what settings were changed?
I've run two different anti-virus programs (including your Anti-Malware) and I also have your driver updater. Plus I made sure that I have the latest version of Logitech's LogiCapture software. And it does not appear that there were any Windows updates (other than Defender) since last week.
So...at this point I cannot use my webcam and I'm fairly certain it was due to some change made within BoostSpeed.
Please help me fix this. Is there an audit log in BoostSpeed that shows what settings were changed?
Location in Privacy setting
I cannot switch Location on in privacy settings i have scoured the web and tried numerous "fixes" under Services and Registry to no avail i think it maybe something to do with the Administration profile login, I have tried creating another admin login "Test" but the problem persists, I have even upgraded to windows 10 Pro but still the issue is thier would appreciate a fix. I have attached a screen shot to assist with identification
Thank You
Thank You
Ipv4 and Ipv6 not connected
my Ipv4 and Ipv6 is showing it is not connected. ive tried a number of fixes including going to command prompts, ive tried going back to a restore point, however i keep getting an error message saying that files are corrupted and cannot be restored to a previous point. ive run windows trouble shooter, i get this error message 0x800f081f. even when i hard wire my computer using an ethernet cord, my internet does not remain on constantly, it will log me off the internet and back on multiple times. do you have a program that can clean up these window based errors, to be able to restore my computer? i believe the last update i got was 12-13-2020, the day prior to that, my wireless was working. anything you can suggest?
Recommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7