Ask a question

Have disabled VSS ok.
Can find no way to erase existing files created by VSS, and they have eaten up neary 50% of my hdd over the last year.

Any help much appreciated!

Best Regards,
Scotty :-)

3 answers

1249 views

whraglyn

May 24, 2020 at 08:18 PM

Issues with Auslogics software / BoostSpeed

I have added file shredder to recycle bin. However, when I try to delete file with file shredder, boost speed opens it large box with deletion options. Is there any possible way to delete file from recycle by using file shredder without opening the entire software ?

1 answer

910 views

Nahid

May 23, 2020 at 12:40 PM

Issues with Auslogics software / BoostSpeed

booster 11 for windows 10

hi,
i downloaded the booster 11 for windows 10.
the booster 11 shows as 32 bit. ideally i need a booster 11 64 bit.
i am using windows 10 on a 64bit system.

do i have to reinstall for booster 11 for 64 bit. if so, can you send me the link as it just auto-downloads the 32bit.

another questions is i have anti-malaware and everytime i shut down the computer and restart the next day, i have to reinstall all over again.
is it because of my anti-virus norton that i use? can you assist me on that as well.
thanks/regards/tony

1 answer

1434 views

tony s

May 23, 2020 at 09:39 AM

スキャンするとリモートデスクトップの履歴が消えてしまう

お世話になります。
リモートデスクトップを使って別のコンピュータと接続しています。
スキャンを実行すると記録されていたIPが初期化されて無くなります。
除外リストに「HKEY_CURRENT_USER\Software\Microsoft\Terminal Server Client\Default\*」を設定しましたが、効果がありません。
他に、Microsoft Print to PDFの保存に使用したフォルダがスキャンするとドキュメントフォルダに初期化されてしまいます。これも除外リストに
「HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders\*」を指定したのですが、効果がありません。
このようにWindowsが保存しているIPやフォルダを残すにはどうすれば良いですか。

1 answer

1581 views

AOKIDS

May 23, 2020 at 03:02 AM

Can't enter settings

Can't enter settings app. Stuck at icon

1 answer

1447 views

STiNG

May 22, 2020 at 06:05 AM

Device-related issues / Sound Issues

built in Dell Inspiron laptop Realtek microphone

My microphone has stopped working and doesn't seem recognised ny Windows 10. Zoom is displaying a picture rather than video.

1 answer

2936 views

PDJ150

May 21, 2020 at 08:41 PM

Windows 10 Disc Optimizer

I have a Samsung Portable SSD T5 (1Terabyte) connected to my Lenovo Ideapad PC Laptop (running Windows 10 64bit) via the USB 3 port.
Windows and Samsung SSD software are both up-to-date. When I run the Windows 10 Disc Optimiser it does not detect the Samsung SSD and only shows my harddrive SSD therefore I cannot optimise it using Windows 10. I have tried connecting it to the other USB ports on my PC (these are both USB 2) but the result is the same.
Do you have any idea what can be causing this and is there a solution ?
(My Samsung SSD is detected by BoostSpeed 11 in the "Optimize" section)
I have included a screenshot of the Windows 10 "Optimise Drives" window on my PC if that helps.
Many thanks for your kind attention.

3 answers

1476 views

Skydiver

May 20, 2020 at 02:09 PM

Issues with Auslogics software / BoostSpeed

toots

that good

1 answer

960 views

siripakboom

May 20, 2020 at 11:24 AM

Flash drives

All of my flash drives are not recognized, irrespective of the USB port, I use. How do I reactivate the USB ports so as to recognized the flash drives?

1 answer

1215 views

BMcQueen

May 20, 2020 at 07:16 AM

Slow

Why is my device running slowly??

3 answers

1549 views

Krishna Harish

May 20, 2020 at 07:12 AM

Updates Inoperative

Windows shows installing but nothing happens.

1 answer

1181 views

Rickmann

May 19, 2020 at 10:33 PM

Error al actualizar windows

Hola soy Jose, tengo un problema al actualizar mi windows me sale siempre el error: Error de descarga: 0xca00a000 tengo una tarjeta grafica AMD

1 answer

1331 views

Joseaf

May 19, 2020 at 04:21 AM

Система пишет , что принтер не подключен

Доброго времение суток! После сканирования компьютера Boos и обновления драйверов с помощью Вашей программы, система стала выдаать ошибку 45 при раюоте принтера HP 1020. Как это исправить?

7 answers

1381 views

Екатерина

May 18, 2020 at 02:51 PM

Security Center in Vista

I am having issues with the nonfunctioning security center in Windows Vista 32 bit / desktop I KNOW , I am unsupported !!! Maybe you can help ?

1 answer

1164 views

Phoenix

Jun 06, 2020 at 09:43 PM

Issues with Auslogics software / BoostSpeed

broken link to update 16 June

The link for your current update is broken

1 answer

1164 views

Clogs

Jun 16, 2020 at 12:36 AM

Постоянная загруженность диска на 100%

Добрый день!

Диск постоянно работает на 100% в диспетчере задач, что замедляет работу системы
В чем может быть проблема?

5 answers

1164 views

Jul 10, 2021 at 05:56 PM

Auslogics 12 Downloading

I hate being such a software web idiot. Its a shame with this being a 21st century of Knowledges and we still have such a night mare internet system.After emailing you all and Mcafee and numerous deletions of safety's and various uploads and downloads and turn this off and reboots , finally I got Auslogics 12 Boostspeed fully downloaded with no errors or failiers to download. I guess , I see how grand , I am sure it works.

1 answer

1163 views

Robert M

Jan 21, 2021 at 12:04 AM

Issues with installed software / Fences

deleted activation informations of windows10 pc

I installed Auslogics bootSpeed 12 Pro, and after first scan, reboot windows 10 pc(Dell XPS 13 9505).
I was obtained next messages. Maybe other sofware's Activation informations were destroyed.

（1）‪C:\ProgramData\Stardock\Fences3\License.sig was deleted.
The first massage is that reactivate fences 3. (Activation code is neaded)

（2）In the case of Auslogics driver updater, my activation code exceeded the limited number of activation.
And the costomer service replied me by mail that they cannot refresh my activation code.

（3）Next massge window opened that I rejister again Sound Blaster of Creative Teclonogy co.

(4)From now on, what do I do to prevent missing activation informations of my Windows10 pc.

1 answer

1161 views

Li Duf

Oct 19, 2021 at 07:05 AM

Internet explorer

I don't use IE can I uninstall it as there are many items that will attach to it example is Roboform (password manager) and I wonder if IE contributes to ecess bagage.

1 answer

1160 views

Eddiemac

Jul 15, 2020 at 07:27 PM

lock screen password

how can i return my window lock screen password

1 answer

1160 views

hezam

Aug 03, 2020 at 10:12 PM

Issues with Auslogics software / BoostSpeed

Error mesage

I recently installed Microsoft Office 2019 on my Win 10 computer. Each time I use your Bootspeed 11 software, and when I access my Office 2019 software, I get an error message "Operatng system is not presently configured to run this application". What can I do to correct this? I am reluctant to use Auslogics software if it continues to prevent me from accessing my MS office software. Please advise. Thank you.

1 answer

1158 views

JAB0101

Oct 04, 2020 at 05:57 PM

Device-related issues / Display Issues

Unable to make screen lighter or darker

I don't remember what I did when I used the Auslogics BoostSpeed 11 free version. I can't recover the previous windows versions, because they were deleted. I went to the recovery center and it didn't help me with retrieving my lost files. Prior to trying this software, I was able to control the brightness of my screen. I have tried to load the HP graphics, and it says that my computer doesn't meet the requirements.

1 answer

1158 views

Paula G

Oct 14, 2020 at 09:09 AM

Проблеммы при использовании виндовс 10

Добрый вечер!
У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.

Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.

Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.

Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.

1 answer

1158 views

Илья

Apr 12, 2021 at 02:40 PM

Device-related issues / Sound Issues

Sound not working

Sound is not playing from built in speakers. It only plays through 3.5mm jack.

1 answer

1157 views

TechHUD

Sep 16, 2019 at 03:22 PM

Device-related issues / WebCams Issues

C922 Pro stream webcam

After initial total scan of my system the webcam is not working anymore.
Any idea ??

1 answer

1156 views

Aug 24, 2021 at 11:31 AM

Issues with Auslogics software / Disk Defrag

No Disk DeFrag menu option in Auslogics 10

I installed this today, paid $30.00 dollars for it (after using a free verison for years), and after one attemot at optimizing my SSD on my Acer Laptop, the prgram restarted after completion and when it did it no longer has the menu option to actually defrag anything. the only menus i have are "reports" "Portable version" "ask a question" and "auslogics store".

what's going on?

thanks,

Brian

1 answer

1156 views

Brian DeFazio

Oct 31, 2021 at 03:18 PM

My Computer is Running Very Slow and I cannot get this one Windows Update to Install- HELP

I work from home of course and my Lenovo is running extremely slow and making noise like it is trying to complete an update. I do have one update 2021-05 Cumulative Update for Windows 10 Version 20H2 for x86-based Systems (KB5003173) that everytime I try to install it is errors out. I have received two different error codes (0x8007007e), I ran the windows trouble shooter, and now I am receiving error code (0x8000ffff). I downloaded your Auslogics and did a full scan for all the free options you offer and still am receiving this error message and my PC is super slow

1 answer

1155 views

Tcram

May 12, 2021 at 08:22 PM

Device-related issues / Sound Issues

sound buged

buged dont fix

4 answers

1155 views

ALDANG

Jun 02, 2020 at 01:41 PM

Issues with Auslogics software / BoostSpeed

Недопустимое значение реестра при попытке открыть JPG файлы

Здравствуйте!
Не могли бы помочь со следующей проблемой.
После сканирования и устранения ошибок программой BootSPeed при попытке открыть файлы JPG кликом мышки появляется сообщение "Недопустимое для реестра значение".
Спсибо,
Валерий.

1 answer

1152 views

Valektburg

Dec 04, 2019 at 06:36 AM

Issues with Auslogics software / BoostSpeed

file backup

posso cambiare la posizione del salvataggio dei backup generati da software?

1 answer

1151 views

davide

Nov 21, 2019 at 06:37 AM

Device-related issues / WebCams Issues

Logitech C920s

I have a Logitech C920s webcam. Everything was working perfectly fine until Wednesday evening. At that time I started doing a bunch of maintenance within BoostSpeed. Something in my system was changed, and now I get a BSOD whenever I boot my computer when the webcam is plugged in. If I remove the webcam from the USB port, then the computer boots fine.

I've run two different anti-virus programs (including your Anti-Malware) and I also have your driver updater. Plus I made sure that I have the latest version of Logitech's LogiCapture software. And it does not appear that there were any Windows updates (other than Defender) since last week.

So...at this point I cannot use my webcam and I'm fairly certain it was due to some change made within BoostSpeed.

Please help me fix this. Is there an audit log in BoostSpeed that shows what settings were changed?

3 answers

1151 views

tacobravo

Oct 23, 2020 at 11:28 AM

Location in Privacy setting

I cannot switch Location on in privacy settings i have scoured the web and tried numerous "fixes" under Services and Registry to no avail i think it maybe something to do with the Administration profile login, I have tried creating another admin login "Test" but the problem persists, I have even upgraded to windows 10 Pro but still the issue is thier would appreciate a fix. I have attached a screen shot to assist with identification
Thank You

3 answers

1150 views

Vaughan Clarke

Dec 27, 2020 at 06:48 AM

Ipv4 and Ipv6 not connected

my Ipv4 and Ipv6 is showing it is not connected. ive tried a number of fixes including going to command prompts, ive tried going back to a restore point, however i keep getting an error message saying that files are corrupted and cannot be restored to a previous point. ive run windows trouble shooter, i get this error message 0x800f081f. even when i hard wire my computer using an ethernet cord, my internet does not remain on constantly, it will log me off the internet and back on multiple times. do you have a program that can clean up these window based errors, to be able to restore my computer? i believe the last update i got was 12-13-2020, the day prior to that, my wireless was working. anything you can suggest?

1 answer

1148 views

bradleycbfour

Dec 17, 2020 at 10:22 PM