No me funciona bien el Brillo, y tampoco me detecta los auriculares
mise a jour
programa ya instalado
Cada vez que inicio sesion aparece un mensaje dandome opcion de descargar nuevamente el programa que ya tengo actualizado.
Ruego me indiquen que ocurre.
Muchas gracias.
Can not delete most recent Restore Point or any other point
I've tried many methods to delete most recent Restore Point or any other point even via the cmd prompt *deleting shadow copies) and it doesn't work. I installed some software my IOBIT Uninstaller cannot find to uninstall and it is not in the list of Add/Remove programs but they are 368MB in size and installed in my pc and cannot llocate them. Only going back to my previous restore point would work and I try to do it but it does not work. PC boots up saying system restore failed most likely dur to active anti-virus software but I have my Bitdefender dissabled permanently when I did the restore point procedure.
Any ideas? Could Bootspeed interfere with restoring the pc at an earlier restore point?
Thanks,
Dimitris
Latest update
Auslogic 13 update problem
software Auslogics
profile
New Problem Notifiction
何回cleanningをおこなってもデフラグや調整項目がある
PCのどこかに、基本的な問題点があるのか心配しています。
Bluetooth não conecta após usar softwares Auslogics
Accessing Permission to view photos
play game without lag
how to keep yuor pc faster,play game at 60fps
note:pc processsor:pentinum g3250
ram 4gb
Location
Any ideas? Not sure how much info you need from me or how much you already know. I need to resolve this issue. I do not want to do a clean install of Windows 10 as I will lose all my Apps etc. I am not a computer expert by any means, so please keep any suggestions simple for me to understand. Thanks.
software updates
in the last few weeks I have purchased several of Auslogics software programs. Since I began using the software, 3 of the programs have been updated with an additional cost. When I originally subscribed to the software I did not expect to have to pay for updates
only after a yearly subscription and the a possible update of the price.Although I have found the software to be good, the prices are somewhat higher than other products on the market such as CCleaner, Malwarebytes and F Secure which I also use with fixed prices for a yearly subscripton withou additional costs for updates. I WILL NOT BE RENEWING THE SOFTWARE AFTER THE ALLOCATED PERIOD BECAUSE MY FEELING IS THAT THE TOTAL PACKAGE YOU PROVIDE IS NOT VALUE FOR THE COST INVOLVED.
PLEASE RESPOND TO MY COMMENTS AS ABOVE. I ALSO APPRECIATE THAT AUSLOGICS SOFTWARE ALLOWS INCREASED MANAGEMENT OF MY WINDOWS 10 PC , HOWEVER I AM NOT CONVINCED THE EXTRA COST IS WARRANTED.
REGARDS, D BOHEMIA
windowsupdateの更新履歴が消えた
Windows11 22h2 osビルド 22621.819
Boostspeed 13.0.0.1
Temperature raises very high when using Boostspeed 12
I used Boostspeed 11 for some time and never had temperature issues, after de Boostpeed 12 upgrade I noticed that the fan started to make annoying noises and checked the temperature of my Laptop with the Core Temp 1.16 program which says the temp goes above 90 degrees Celsius.
Tried to install 12 again with no result.
Now back to 11 again and the temperature is normal again.
My question is this a normal behaviour of the 12 version of boostspeed?
bootspeed 5
I have bootswpeed 5 on windows 7. I recently purchases 11 for other windows 10 computer.. I downloaded 11 on windows 7 and now have access to bootspeed 5 and 11 on this 7 computer. Revo uninstaller does not show 5. best way to uninstall bootspeed 5? thanks, jimz
IMEがスキャン後停止する。
Windows10のinsider Programに参加しています。 Boostspeed10を1年半ほど使っており、Win10 build188xxごろまでは問題がありませんでした。ところがそれ以降のビルドから、IMEが無効になるようになり、Windows のバグかと思っていました。
ところが、ふと思いついてBoostSpeedのスキャンで削除したファイルを戻すと、IMEが復活しました。 Windowsのアップデートの際にBoostspeedとバッティングするような変更があったのかもしれないと思っています。
今、Boostspeed11を使っており、システムにかかわる項目を大幅に外して使っています。
いつも使うのは クリーンアップと保護です。
トラブルはIMEだけですので、IMEにかかわる項目だけ外してスキャンしたいとおもいます。
クリーアップ・保護の項目で外すべきものをお教えください。
Unable to make screen lighter or darker
Latest BoostSpeed Version
This is becomming annoying. I keep getting alerted that a new version of BoostSpeed is available. I've downloaded 12.0.0.2 and ran the installation which prompts that it is removing with re-start and then I have to manually install the latest download. After three successful runs with this I still end up with version 12.0.0.1 What gives?
Cannot activate
WHEN I TRY TO USE THIS VERSION, IT STATES I HAVE ONLY THE FREE VERSION, AND WHEN I TRY TO USE THE PRO VERSION THE WEBSITE WANTS ME TO PAY FOR IT AGAIN,BUT SAYS IT IS REGISTERED ALL OK
FOR EXAMPLE WHEN I TRY TO DEFRAG, IT ONLY DEFRAGS, I CAN NO LONGER DEFRAG AND OPTIMSE MY DISCS AS BEFORE
THIS IS REALLY FRUSTRATING AS I HAVE BEEN A LONG TIME SUBSCRIBER
PLEASE HELP.
acsses denied in changing windows services
i want to install an app update from windows store but i recieve an 0*80070422 and as i searched it heads to a disibled windows update service in windows services panel and i wanted to turn it on and change its status from desibled to automatic but it keeps accsess deniding what should i do plese step by step and im sure about my administrator acssess
Проблеммы при использовании виндовс 10
У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.
Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.
Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.
Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.
Ошибка драйвера
Ошибка драйвера устройства "Intel(R) Management Engine Interface" (вложение файл 1). Запуск этого устройства невозможен (код 10). Аналогичный статус этого устройства показывает Auslogics BoostSpeed 12.
Переустановка драйвера средствами Windows ситуацию не изменила.
Программа Auslogics Driver Updater определила, что все драйверы актуальны (вложение файл 2).
system windows 8?
How do I change what system it shows? I have always had windows 10 on this computer.
Location in Privacy setting
Thank You
boostpeed 11
I've uninstalled and reinstalled boostpeed 11 four times now. Is there a bug on the task scheduler. it's kee[s crashing the program. and I have to manually start the maintenanace daily now.
How can I keep my pc secure
When updates for win 7 stop, how can I keep my computer safe please. I don't want to upgrade. Thanks.
Wana know how to change additional calendar
hello there , how to change additional calendar for windows 10 ? i need to change this chinese additional to persian (iran) ,, thxxxx
Pop-Up Product Sales Window
Hi-
I just recently purchased your Bootspeed system--which is great and full of great features that I typically have to buy many programs to do. I keep getting an ad pop-up to buy your other products and when I check off DON'T SHOW AGAIN, it just does that. It's annoying and a turn off..
Thanks,
Steven