Диск содержит ошибки
reparer windows 10
mot de passe bios perdu
j'ai un pc hp compaq 6730s sous N°=CNU9020NKN
mon mot de passe par defaut (e9lo1719s9) n'a pas d'effet
j'ai change la pile bios rien
j'ai utilise hiren's bootcd rien
Aider mois s.v.p et merci d'avance................
How do I stop starting up when I start the computer
When I start up my computer, PCTuneUp starts up. How do I prevent this from happening.
Problema con Auslogics Driver Updater
Buenos dias, tengo un problema con la aplicacion Auslogics Driver Update, ya solicite anteriormente me solucionen este problema, inclusive me solicitaron que reinstale el aplicativo, pero no se soluiciona este proble, por favor tengo que actualizar algunos drivers, pero se queda la PC congelada cuando va hacr la actualizacion de dichos driver, para constancia les envio fotos del problema.
once power button pressed to start up...
Any help gratefully received
Thank you
Tom
location
TaskManager.exe
Interfearing with VPN
Whenever my VPN connects to the internet, the Auslogics Bootspeed notifies, an attempt to change the DNS was diplayed. Well if I connect via VPN it will change the DNS. My question is does your softwere blocks the attempted change of DNS or it's only a notification. If it blocks then how do I dissable it as I want my VPN more than your software.
Thank you,
Winston
I have windows installed on my SSD and HDD so how do I transfer data from one installation to the other without cloning
So I got and installation of windows on my SSD and HDD, but now I want to shift my files from HDD to SSD installation and then delete windows from HDD, but I don't want to clone(unless it doesn't clone windows installation and other files that I already installed on the SSD) my current installation(HDD) as it was pirated while the other one is legal, and by data I mean everything from text files to programs I installed, so I just want the user data and programs I installed to be shifted to my SSD without deleting windows from SSD and cloning the HDD one. Pls Help as quickly as possible,
Windows Defender Disable Remove
THANK YOU
SAKLIS DIMITRIS
Boot Speed, or Restart Speed
rsop.msc
I also ge the same error when I try using "GPResult /r
Thank You
Вирус
Disk Defrag pro not showing new drive
I have just installed a new external hard drive (G) and the drive is not displayed in the list of disks in Auslogics Disk defrag 10. Could you please advise me how to correct the issue.
Sorry but I did not know which sub category was appropriate
ошибка
AusLogic # BoostSpeed users
Where does display state the maximum number of user available with the product key assigned; and where does it show how many have been assigned; and where do they give the user name of the assigned
Host Services for Windows Processes
Protect Doesn't Recognise MS Edge
It was working for a while on Bostspeed 10, but then it stopped working. I upgraded to Boostspeed 11 because there was no support for BS10 after BS11 came out.
BoostSpeed 11 still doesn't appear to recognise Microsoft Edge
Error Message
Как устранить неисправность
Операционная система не загружается. После включения компьютера загрузка операционной системы прекращается, колёсико всё время крутится и крутится. Такое положение может продолжаться и 1 час, и 2 часа и 4 часа. Больше не пробовал. Иногра, но очень редко, после неоднократного включения-выключения компьютера он вдруг после включения через 11-13 секунд, загружает операционную сисчтему, как это происходило после его покупки в магазине,
Вопрос:. В чём заключается неисправность и как эту неисправность устранить?
Error system
Windows Blue Screens
Hey,
Im getting a lot of windows blue screens, Kernel issues and Server exceptions and memory as well, i did a lot of testings like memory testings, when i do windows file check, when i run CHKDSK check in cmd i get files are NTFS error, Any help?
Bootspeed 12 hung at 13% complete
Started a scan and it is in Stability with a message that says 12047, scanning please wait. Detail screen says 13% complete. Its been like this for 24 hours. What do I do now?
New update fails to open
I have auslogics BoostSpeed 12 Version 12.0.0.4 I get a message that their is a new version available to download and install.
I download the install program auslogics-boost-speed-setup.exe
When I click on the install program I get the error message that the filename, directory name or volume label syntax is incorrect and then the program dissappears. I have enclosed two screen shots. I am unable to install the upgrades. Please help.
No me deja instalar programas pues este me devuelve una referencia
Видеокарта
Проблеми с пуском из за того что ставлю найвисший приоритет в елекропитание видеокарти.Незнаю как решить ету проблему,также после обновления видеокарты .HD5000 виндовс делает перезагрузку системи и появляеца синий екран смерти.До обновлений драйверов видеокарти и обновлений виндовс таких проблем ненаблудалось.
defrag 10 running sooo slow
Used to run fast, I have changed the advanced settings, now running slow,
I guess you cannot know which advanced settings I have enabled, (most of them)
what do you think? and what is your best guess as to my problem?
BoostSpeed Pro Version
Hello Sir,
My question is whether the software Auslogics Registry Cleaner 9 is not already included in the software BoostSpeed in its Pro Version. I will have to purchase and register both softwares? The BoostSpeed Pro Version will not be enough to bring my PC the best performance?
Thanks
Перестали работать порты
Necesito una solucion
puede que halla activado algo por accidente de este programa y ahora ya no puedo cambiar el brillo de la pantalla no encuentro ninguna configuracion, tampoco es un problema de controlador grafico ya lo actualize.
Ayudenme a solucionarlo
Windows search indexer
Windows search indexer seems to be taking forever to finish.
I have restarted the process, limited the number of files to index and even disable the AV to allow indexer to index faster.
But after a while it comes back and keeps eating away between 60% to 24% of CPU
Any fix for that? runing on (win11 64 bits.
Can't open my Chinese typing software
I am a new user of your company's product - Auslogics BoostSpeed. After I use the boostSpeed, I can't open and use my Chinese typing software (倉頡 and 速成) in window 10.
I went to the Setup > Time and language > language, and still can't find a way to open it.
In BoostSpeed, I don't know how to undo it, so I can use my Chinese typing again.
Please help me solve this problem. Thanks.
Best regards.
Soni
Temperature raises very high when using Boostspeed 12
I used Boostspeed 11 for some time and never had temperature issues, after de Boostpeed 12 upgrade I noticed that the fan started to make annoying noises and checked the temperature of my Laptop with the Core Temp 1.16 program which says the temp goes above 90 degrees Celsius.
Tried to install 12 again with no result.
Now back to 11 again and the temperature is normal again.
My question is this a normal behaviour of the 12 version of boostspeed?