1888 questions

blocked

I now get a this app has been blocked for your protection

using my shortcut for disk defragmenter pro
890 views
Jan 21, 2022 at 05:40 AM

Product will not activate

I've entered the product key now 3 times. each time it is accepted. when I go to run the 1st scan I see on the bottem right corner of the screen that boostspeed stills needs to be registered and then I reseive unexpected error. I just updated to 12 for my client - Produce key -

Content hidden to protect privacy

849 views
Jan 20, 2022 at 10:39 PM

administrator blocked auslogics

I have been using auslogics for multiple years now... I recently bought another key today. Today the software wont open because it pops up with a message indicating this software has been blocked by the administrator. However, I am the administrator.... So I am confused because now I can not run the auslogics software. Can you help.



Kind Regards,

Michael Figueroa
1443 views
Jan 19, 2022 at 10:17 PM

Integrator.Exe wird von Windows geblockt

Hallo,

"auf einmal" ist BoostSpeed nicht mehr registriert (keine Pro-Version mehr).
Wenn ich den Registrieren-Dialog ausfülle mit meinem Linzenzschlüssel, erscheint zwar die Meldung das BoostSpeed registriert wäre, der Button unten rechts verschwindet nicht.

Daraufhin dachte ich, ein Neustart von BS würde das schon beheben, allerdings erscheint dann die Meldung, dass die App aus Sicherheitsgründen blockiert wurde (siehe Anhang).

Wie bekomme ich mein Boostspeed wieder voll registriert?

MfG,
P. Kaatz
997 views
Jan 19, 2022 at 11:58 AM

Windows Update, something went wrong

My sytem is no longer doing its windows updates, it always displays an error saying " something went wrong Try to reopen settings later"
820 views
Jan 18, 2022 at 11:44 PM

ホルダーが「空」になる

boostSpeed12を自動起動していますが、本日データを参照しようと、windows(C)とData(D)のデスクの中で、(D)に保存してあるホルダーをクリックすると、「このホルダーは空です」となってどのホルダーもデータが読み取れません。ホルダー名はきちんと表示されています。なぜこんな風になるのでしょうか。復元する方法をご教授してください。
901 views
Jan 16, 2022 at 04:19 AM

Analyse pour ajustements Windows

Bonjour,
lorsque je fais l'analyse pour l'ajustement Windows , l'analyse ne va pas plus loin que 29% et puis j'attends des heures et c'est toujours à 26%.

Pourriez vous m'aider,

Cordialement
Hendrik Zutterman
780 views
Jan 15, 2022 at 02:21 PM

right mouse click

i have big problem when i click with right mouse button it loads forever. i cleaned registry already few times but it didnt help. and i am helples dont want to reinstal whole system ...
828 views
Jan 14, 2022 at 09:47 PM

Windows 11

I've upgraded to Windows 11. Are there any issues using BoostSpeed with Win11 that I should be aware of?

Also, I have Norton Anti-virus. Are the two programs compatible or working against each other?
922 views
Jan 14, 2022 at 08:13 PM

Browswer history

Before I installed Boostspeed, I used to be able to start typing a website into my browser and it would recognize what I was doing and fill in the rest for me. Super convenient for sites that I use all the time like banks. Now that doesn't work anymore and I really miss it. How do I get it back? Thanks!
758 views
Jan 13, 2022 at 10:20 PM

pop up for ugrade when I already subscribe to boost 12

I upgraded to Boost12 quicte some time ago and yet I keep getting an annoying popup on my screen to upgrade. I need this to stop and this should not count as one of my questions because it is purely an issue on your end.
913 views
Jan 13, 2022 at 03:15 PM

Old Windows Versions

When I do a Scan and Resolve, the scan always turns up the Windows "Tweak" of removing "Old Windows Versions." However, this appears to never get done, becaause I get the same option every time I run a Scan.

Why isn't it removing "Old Windows Versions?"
1338 views
Jan 13, 2022 at 12:04 AM

Updates to file finder and boost speed

Almost on a daily basis I am getting notification of duplicate file finder and BoostSpeed 12 has a new update. I click onto download, I see where it is downloading, but when I go to install the update it does nothing. It doesnt tell me it has completed installation or given me a notce that it failed. This has be going on since I puchased Logistics. I guess it is not my fault for not following up on this, since I'm not getting my monies worth.
If you could help to get the problem solved or tell me what I've been doing wrong, sure would appreciate it.
Thanks and have a Happy New Year!

Mary Jane West

Content hidden to protect privacy

1120 views
Jan 12, 2022 at 07:22 PM

driver power state failure

Здравствуйте!

Мой ноутбук иногда являет синий экран с сообщением driver power state failure. Ноутбук Hewlett Packard, ОС Виндовс 10.

Антивирус Касперский, ещё стоит Auslogics BoostSpeed 12.

Ноутбук куплен прошлой весной.

Скажите, пожалуйста, существуют ли способы решения этой проблемы?

С уважением, Иван.
894 views
Jan 12, 2022 at 05:41 PM

Gpu

I just downloaded the Auslogics and opened it, then i hit scan after the scan i applied all tweaks and reboot my computer after the reboot my computer works fine but the screen does not come its just pitch black how do i fix ? [İ am using hdmi to connect my gpu to monitor]
1029 views
Jan 11, 2022 at 08:05 PM

Неверная функция

Система WINDOWS 10. пишет неверная функция на C/Program фото 1641922315365 прилагаю. ПОМОГИТЕ исправить или удалить неверную функцию. Что лучше сделать ?
1167 views
Jan 11, 2022 at 05:36 PM

Відсутнє налаштування

Зникло налаштування "Яскравість" в Центрі підтримки портативних ПК...
731 views
Jan 11, 2022 at 11:43 AM

Making best use of the high system resource usage detected warning

Boostspeed regularly gives me a warning message, "high system resource usage detected." What should I do to most usefully take advantage of this warning?
897 views
Jan 10, 2022 at 03:20 PM

No Windows Update KB5008212

From a couple of months now, I am unable to install Windows Update "Windows 10 Version 21H1 for x64 Systems (KB5008212)". Windows Update is urging me to do so, but all I get is error (0x800f0831). I've tested all kind of solutions from Microsoft and other sources, and tried al least a dozen times, with no success. Some sources insists in the fact you need previous updates installed before this oner, and Bootspeed 12 clears update files as a part of Windows Slimmer tool. Is the first time I experience a problem like this and, even not critical, is worrying me because I can get a solution. Best regards.
912 views
Jan 10, 2022 at 07:59 AM

Crackling sound after few hours

Hi, thank you for your time,

After a few hours of my computer being on, all sounds from the PC will have crackling sounds. There is nothing in particular that triggers it. No specific amount of time before I start to hear it. It has been happening for quite some time now

Thank you
1403 views
Jan 09, 2022 at 06:06 PM

ask

i have licence for home version
and i install pro version
how can i back to home v
1116 views
Oct 23, 2020 at 04:28 PM

Intermittent PC Crashes/Freezes

To Whom It May Concern,

I intiated my original correspondence on the 5th November as indicated below:

I, now, upload the Event View Log, in the hope this will assist you in resolving this issue. Many thanks. As an aside, I think there should, also, be an option to 'Add File' from my account page. Instead, I am obligated to intiate another question to include this file and this should not be the case, when it is part of the same, initial, question.

This is a bit ridiculous. I am asked to create a log from the Event Viewer which is 'saved as' a .evtx file and now I cannot add it! Neither can I add it in a format that is recognised by Auslogics! Wow! Really, really helpful - Not!

I await an update at your earliest available opportunity.

Kind regards,

Ian

Ian R. W

Dear Ian,

Thank you for posting your question on our forum.

The easiest way to solve the issue is to uninstall the program that creates this error or contact their support.

Often, such errors are created by hacked software or bugs in software that can only be solved by their developers.

Running the command "sfc / scannow" in CMD under the admin might help with the issue.

You can also send to our support logs with system information and event viewer so that we can better understand the issue.

To get the system information report press Start -> Run, type in MSINFO32 and press the Enter button. Save the report using the File -> Save menu option.

To get logs from event viewer, please do the following:

1. Press the key combination "Windows" + "X"

2. Select "Event Viewer"

3. Expand the "Custom Viewer" subsection

4. Select "Administrative Events"

5. Expand the "Action" menu

6. Click on "Save all events in custom view as ..."

7. Save log to PC

If you need any further assistance or have any other questions, please do not hesitate to contact us.

Upvote (0)

Ian W
Edited 7 days ago
Waiting for moderation
Dear Suzanna,

Your prompt response to my request for technical support is very much appreciated.

Further to your recommendations I have now run the commend "sfc /SCANNOW in CMD under the Administrator privileges.In the event, corrupted files were found and successfully repaired.

At this stage, I think I will see if this provides system stability, before sending the associated report with the Windows Event Viewer.

I remain grateful for your attention, time, effort and co-operation in this assisting me to resolve this issue.

Kind regards

Ian

Ian R. W

[/private]
Dear Suzanna,

Further to my correspondence sent to you on the 5th November, I have continued to receive intermittent crashes/freezing on my PC, so as recommended, I attach the associated Event View Log, in the hope this data will be able to assist you in resolving my issue.

Kind regards,

Ian

Ian R. W

1116 views
Nov 12, 2020 at 01:09 PM

Upgrade to BoostSpeed 11

I paid for this software before it went to version 11. Now that it updated to 11 I have to purchase it again?

1115 views
Sep 09, 2019 at 06:44 PM

Cross mark on wifi symbol

This happens sometimes . When i on the laptop there is a red cross mark on wifi button and when i on the wifi it doesnot detect any network . But after I off and on the aeroplane mode and the system a lot of times it goes off . It is not related to the function key which disables it as i tried it .
1115 views
Mar 20, 2021 at 06:00 AM

Very long time to load the computer! HElp!

can you help me please, I have a laptop that takes a long time to load please help me

1114 views
May 17, 2020 at 07:40 AM

Sound Fades In and Out

With hte update of Windows t0 the sound on my computer fades in and out. I have used the troubleshooter; however, it is of no help at all.

I have a HP Pavilion 15t-n200 CTO Notebook PC and HP is of no use any longer as my warranty has run out and as my computer is almost seven years old it probably cannot be renewed. My laptop has a Conexant Audio driver HD,

I am considering buying a new computer but before spending $1000, I want to be sure there isns't something I can do with the one I have.
1114 views
Dec 03, 2021 at 03:06 AM

Ma webcam ne fonctionne plus

Bonjour,
Suite à des modifications de BootSpeed, la webcam de mon ASUS VivoBook Pro 17 N705FD ne fonctionne plus.
Elle a commencé à se mettre en 4/6, puis elle est maintenant déconnectée !
J'ai désinstallé le programme et coché l'option "restaurer les changements éffectués", mais cela n'a pas résolu le problème.
Best regards,
loupherv
1113 views
Jul 16, 2021 at 08:38 AM

Tastatur nicht Erkant

Windows 10 Bennent meiner Tastaturtreiber nicht richtig,dann Arbeitet Tastatur nicht mehr.
1112 views
Jan 26, 2021 at 10:30 PM

BoostSpeed ​​11

Приветствую уважаемые! Во-первых:после оптимизации жёсткого диска"С" SSD c ОС , диск перестал открываться в предварительной программе запуска(BIOC) Windows 10 pro версии 1903, прекидывал диски местами результатов нет " Мёртвый" подскажите как его реанимироваь??? Пришлось записывать ОС на обычный жесткий диск. В цело мне ваша программа нонравилась - поддержка обяного жесткого диска значительно лучше чем другие...

1111 views
Oct 26, 2019 at 04:09 PM

pendrive got corrupted when i applied free up space to it by auslogics boostspeed

two days ago i have performed an action named "free space wiper" to my pendrive because i wanted to format my pendrive but befor i proceed to this action i proceed to free space wiper and i have applied to my pendrive , i don't no why but the operation stoped automatically on 33% , then i have tried to restart that operation but my pendrive was not listed on removable devices, then i have eject and remounted but still my pendrive was not listed on removable devices , then i mounted my pendrive to another system luckily that system identified my pendrive but when i tried to perform format operation to my pendrive , that shows me an error that" this disk is write protected" and after that "windows can't format removable drive:H" .....

and that's how my pendrive got corrupted by performing an operation "free space wiper"

1111 views
Aug 23, 2020 at 01:20 PM

Skipped traces

Lanovo with windows 10

Just upgraded to latest BoostSpeed 11 and have a problem I NEVER had with the precious version ~ 245 traces in the broswer SKIPPED! Made repeated attempts, alwys 245 skipped! Not good!-

PS, forcing a "Subcatagory" selrection makes ZERO sense. the categoriars are inane!

1110 views
Oct 12, 2020 at 10:59 PM

Uninstall

I used Windows to uninstall this software. Is there anyway to find out if there was any junk left behind?
Or on any software that has been uninstalled with the Windows Programs.
1110 views
Jun 23, 2021 at 12:51 PM

Outlook 2013

I cannot no longer open a browser in Outlook 2013 after using your registry cleaner. Let's not play games like we have been doing since July 2020. Support is a JOKE!!!

1109 views
Nov 02, 2020 at 11:28 PM

h78

Уважаемые господа!
Я получил извещение об доступном обновлении программы. Япопытался кликнуть обновление, но ссылка не кликается.... эта же проблема с отчетами, когда я пытаюсь кликнуть подробный отчет, он не кликается.
Что мне предпринять для устранения этой ошибки?

1108 views
Jun 30, 2020 at 04:15 AM

Eliminar una partición creada por Windows

Mi laptop HP tiene una memoria de 120GB. De los cuales hay una partición llamada HP_RECOVERY (G) que ocupa 21GB.
Cuando adquirí la laptop traía el Windows 7, ahora tiene el Windows 10.
Todo el disco duro lo uso para instalar software, no hay archivos de ningún tipo almacenados excepto los del sistema y de las aplicaciones que tengo instaladas.
Todos los datos de otro tipo (básicamente imagenes),los manejo a través de discos duros externos.
Deseo eliminar la partición (G) con el fin de abrir más espacio en el disco duro de la laptop, ¿Es posible?
1108 views
Feb 24, 2021 at 10:40 PM

The networks are not displayed

The networks are not displayed after the last winoes 10 update 21H1
1108 views
Oct 15, 2021 at 07:19 PM

DNS server

Hi! Thanks for the help! I would like to change my local DNS server to a faster one! I have used Namebench to scan for one but the Auslogics app blocks my upgrade. Can I tempoarily disable Auslogics to change the server or must I uninstall the app then reinstall it after I get a new DNS server? I always do a network scan to set the perameters which does help but it help to get a better DNS! What can I do? Thank You, Craig Stone Jackson Ca.
1107 views
Nov 06, 2021 at 06:47 PM

Installing Auslogics boost speed

Can Auslogics BoostSteed be installed on a second computer?

1107 views
Apr 08, 2021 at 01:17 AM

Error 15

How to fix "Access Denied Error 15 This request was blocked by the security rules" in Windows 10 Pro with Edge browser?

The date and time information for this PC is correct.
I am not using any Proxy or VPN for my internet connections.
I am NOT able to access this website with Windows 10 Pro PC using the Google Chrome browser
I am able to access this website with another Windows 10 Pro PC using the Google Chrome or the Edge browser
1106 views
Jun 08, 2021 at 05:50 PM

Internet Optimization

Hello. i get free version of boostspeed and i see there is internet optimization that needs pro version and before i try to upgrade i want to ask what it is about, how dose this optimazies my internet? i have problems playing online games and i hear that windows 10 needs optimization for better gaming experience, dose this will help?

1106 views
Jan 23, 2021 at 01:58 PM