Not able to install an upgrade for Boostspeed 12.2.0.0
After completion of the upgrade software, the Help box remains showing my Version as 12.2.0.0
проблема с регистрацией
До недавнего времени проблем не возникало. Последние несколько дней слетает активация, каждый раз при открытии программы предлагает активировать ПРО версию, после ввода ключа выскакивает окно, говорящее, что программа активировани, версия ПРО, но в самой программе никаких изменений нет, кнопка "Активировать ПРО" не исчезает, и в "помощи" ропять то же самое. Что делать, как решить проблему?
Drive C: - Reports Disk has errors
Despite the statement that the report provides details on disk error check AND REPAIR RESULTS, the report simply states that my C:Drive has errors.
There is no indication as to what the errors are or that they have been repaired; on the contrary the errors have not been identified nor have they apparently been repaired.
How do I find out what the errors are and how do I repair them?
Regards, Harry McBride
System Information Report
ID: 05
Name: Reallocated sector count
Value: 134
Worst: 134
Threshold: 140
Raw Data: 522
Status: Prefail
What does this mean and how do I fix it?
Lizenz
Delete wrong user
Want to delete wrong choise
Unable to activate Auslogics Bootspeed 12 PRO Version
Windows refusing access as administrator
ユーザー制御
デスクトップのショートカットから、ブーストスピード開きません。タスクバーからなら開くのに。ユーザー制御ウィンドが出てダメです。ドライバーアップデーターのショートカットも同じです。また、時々ですが、ブーストスピードが開いた時に、すべての画面が白紙画面になります。
アカウントとかセキュリティーの調整をしてみたのですが変わりません。インストールしなおしても変わりません。セキュリティソフトが干渉でもしているのでしょうか?何か良い方法はないでしょうか、お願いします。
Could not activated my license
Program not registered
Thank you
Activating Software Problem
I have now come to the end of my tether with this piece of software. I have been sent a Registration Code because the software I purchased on the 14 Dec 2021 keeps on asking me to Activate Pro Version. I removed the programme from my computer and started afresh. The programme dowloaded and the after putting in my Licence Key it advised me that the programme was registered. However, there is white writing on a green backgroumd in the bottom right hand corner stating: Activate Pro Version (when pressed advises what you get with the Pro version - which I have already purchased!) I have added this as an attachement on an MS Word doc.
Carl Bruce
BOOT SPEED PRO
I HAVE RENEWED MY BOOT SPEED SUBSCRIPTION BUT I CAN'T PERFORM CERTAIN FUNCTIONS I AM ASKED TO TAKE PRO VERSION WHILE I HAVE ALREADY PAID THE BASIC VERSION HOW TO UPGRADE TO THE PRO VERSION WITHOUTPAYING THE 50 EUROS MORE ?
LICENCE N°:
THANK YOU
Aktivation not Possibel
I did try to activate the pro version.
Reslult: The product has been activated
But in realatiy is the green botten still here and its not working as should when activated.
Regards
Kurt
Auslogics 12 is blocked by Windows 10
My Auslogics 12 is blocked by Windows 10. What can I do to fix this problem? And I cannot to set my Auslogics license key. I have just a basic version of programm now.
Программа была заблокирована администратором
About Auslogics BoostSpeed 12
Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします
Hirosuke Kajiyama
Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします
License key ライセンスキー:
Auslogics BoostSpeed 12
Pro version ?
Plus the last time i used driver updater it updated my pc then restarted it and it would not boot up no matter what i tried, I then had to reinstall windows with a backup. not used driver updater since.
Thank You.
Admin. Blocked
Thank You
James Elder
Internet Optimization
Hello. i get free version of boostspeed and i see there is internet optimization that needs pro version and before i try to upgrade i want to ask what it is about, how dose this optimazies my internet? i have problems playing online games and i hear that windows 10 needs optimization for better gaming experience, dose this will help?
WIFI droping
h78
Уважаемые господа!
Я получил извещение об доступном обновлении программы. Япопытался кликнуть обновление, но ссылка не кликается.... эта же проблема с отчетами, когда я пытаюсь кликнуть подробный отчет, он не кликается.
Что мне предпринять для устранения этой ошибки?
WINDOWS BEHAVING IRRATICALLY
ive tried all your fixes pertaining to my issues but it doesnt seem to have helped all that much
please help
Трещит в простое
HDD WD Purple 6 TB, во время работы видет себя тихо, даже если на него что-то скидываю или с него воспроивожу (ну или вообще, хоть что-то делается на компе, абсолютно все что угодно = треска нет)
Если комп стоит несколько минут без дела, то HDD начинает трещать
Стоит мне хотя бы мышку сдвинуть, треск исчезает
Как это устронить?
Software Problems with Printer
Hi! Everytime that I run Auslogics, that scans my computer for errors, cleans websites, etc.), my printer stops connecting properly with my computer. It appears that it affects the drivers. I have to clean out the printer, reinstall, etc., that takes a great deal of time. Your program speeds up my computer, which is great. But this repeated problem with my printer is a serious issue. Is there anything that I can do to stop this problem. You might need more information to solve the issue. I am happy to provide it.
Support?
Hi! Is there a plan to support the Opera GX browser? I have been using this broswer for my web serching needs. It's pretty good. However, Auslogis BoostSpeed is not recognizing the browser as a supported browser. Thank you for taking the time to read this question.
Автозагрузка Auslogics File Recovery 10.1.0.1
Здравствуйте, у меня вопрос по программе "Auslogics File Recovery 10.1.0.1". Она постоянно загружается при запуске Windows 7 Pro. (в трее). Хотя я и убирал запуск этой программы из автозагрузки, всеми способами. Помогите пожалуйста решить вопрос с отключением автозапуска "Auslogics File Recovery 10.1.0.1".
Спасибо
Problem Solution
Indexing keep turning off
I noticed that my Auslogics BoostSpeed 11 keeps turning of my windows search indexing. How can i prevent that from happening.
regards
Latest BoostSpeed Version
This is becomming annoying. I keep getting alerted that a new version of BoostSpeed is available. I've downloaded 12.0.0.2 and ran the installation which prompts that it is removing with re-start and then I have to manually install the latest download. After three successful runs with this I still end up with version 12.0.0.1 What gives?
printer problem
Missing subcategory
What is the correct subcategory for a software question for Auslogic products such as Boostspeed, Disk Defgrag, etc.? The "Ask a Question- New Question" screen will not allow a Subcategoty that is not on the drop down list.
Settings
The last two times now that I Have used the "Protect" feature. All of my saved log ins have been deleted. I've had to go to the rescue center, and restore the stuff that was done. I need to know how to properly configure the settins so this does not happen again.
update
so my windows 7 ultimate needs upadate to windows 10 so tryed to update it but it randomly shut off. i tryed again but it huppened again. so i though it was the update thats not working. i was playing a game but it huppend again. it made a lot of noise and shuts off without warning so i did i everthing i cold to fix bt cant seem to fix it at all. what should i do. i need to update it but to update it i need it to stop randomly shuting off
Интернет-соединение
Добрый вечер, подскажите пожалуйста как оптимизировать и повысить скорость интернет-соединения через Wi-Fi?
Спасибо