Spinner GIF Keeps Spinning on Some Websites
I keep seeing the spinnning GIF wheel as I wait for the web page to load, which it does not and then times out..
So far, it happens with Edge, Google, and Firefox. I have restarted several times and have cleared the cache, flushed DNS, reset the browsers, completed a deep clean, registry clean, and optimized internet settings with SpeedBoost, run two anti-virus malware programs (Windows Secuity and Malware Bytes), and have run memory diagnostics. All with the same result - no change.
Windows and the browsers are all up-to-date.
When I inspect the Javascript (>by right-clicking on the Spinner), I see that the Spinner is there and seems to be waiting.
Any suggestions?
printer malfuntion after running Boostspeed 13
Driver Issues
We have a AMD Radeon HD 6950 Graphics Card,
I looked all over the Internet for the right driver.. But I cannot find the one that works on our pc..
We use Windows 11 Pro X64
I have tried the most of drivers I could find, but none of them work as they should...
We have a HDR Display now, And with some drivers it is disabled.. Others it works with no problem.
As soon as we want to start a game for example Hitman 3..
It Does not start.. And with other games it prompts me to look for the new drivers for our graphics card...
That it is outdated... So please please help us fix this problem?
It would mean the world to us!!
I have added a pic, of the properties of the card with it, using the program speccy
Thanks for the help!
Best Regards!
Файлы родителей
wrong core amount
Your program ver 13 reports that my I7 13700k have 12 cores but its supposed to be 16 with 24 treads. Why is that ?
BoostSpeed always errors off
Error EDrive not found Exception. Drive could not be found.
What can I do?
external hard drive recovery
P.S. under device at the top of this inquery what I choose does'nt apply to my question i just had to put something there so it would send. this is in regards to an external drive i have.
Annoying Windows Pop Up Notification
my question is: how can I get rid of this annoying pop up Windows notification?
Memory Insufficient
Version 11.0.0.2
Full Version (PRO)
I have two drives I am trying to defrag. It used to work but now I am getting "Memory insufficient to perform this operation"
The drives are large:
R drive 83 TB - 19 TB free
S drive 40 TB - 18 TB free
It has 128 GB of memory
Page file is set set to automatic
I have a similar server and it does not have any issues.
Any settings or suggestions I could try.
I have been running Auslogic for about a year with no problem but since the last update I started having this problem on this one server.
Drive local do Windows C:
Manuel Araújo
RAM is getting full most of the time
I have an 8GB RAM and getting full most of the time.
Is there a way or app that can auto optimize my RAM?
Looking forward to your reply.
Many thanks!
Regards,
Mark
auslogics boostspeed
fichiers très très longs (240-250 caractères)
Memory problems & Upgrade question
I also have a problem with the fact that I have to use 2 memory hog apps. Do you have an app (similar to Iobit's) that will allow me o release unnessecary memory?
Moving the $HOME$ Folder to amother drive
2. I have an application that is looking to install a directory on the $HOME$ directory - currently this is on my C Drive and I need to move it to the D Drive.
I am looking for a script that will change the $HOME$ folder to the D Drive.
Please an you help I currently use windows 10 but will eventually be upgrading to windows 11
Fences Requires Reentry of Product Code Everytime BoostSpeed Runs
I have had Fences for many years. When BoostSpeed runs its weekly maintenance, I must re-enter the Fences Product Key to re-register the product. I do this and Fences works fine again.
This problem occurred several years ago and you provided a fix where BoostSpeed does not delete/address a file required for Fences related to the product key.
Would you please re-send those instructions if that would resolve the issue or advise other solutions to resolve?
Thank you,
Rich Sullivan
Hirosuke Kajiyama
Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします
License key ライセンスキー：
Auslogics BoostSpeed 12
I want to remove the arrows on the deskyop icons
Tony Bell
Напортачил...
При попытке вернуть всё по умолчанию или перенести в другое место, пишет: "Не удалось сформировать список обычных подкаталогов в "D:\System Volume Information".
Отказано в доступе.
Как вернуть положение по умолчанию???
Updating to the newer software
Everytime I try to update the software, it goes through all the steps, but does not do the update. It continues to show the original version and reminds me to update again. I have tried this about 10 times with no success.
One Click Scanner
The former version of BootSpeed -one click Scanner was running much faster that the new one (version 11).
Is that logical ?
(forget the hereabove Subcategory)
Defragmenter related question
There was no option for auslogics defragment so i chose a wrong category.My question is about defragment.Does defragmenting the hard disk HDD daily damage the hard disk or corrupt it ?
Windows Bitdefender
The Window Securitu System detects a Trojan in the Auslogics Speedbooster TaskManager.
Do I have a problem?
See attached file.
Sorry it is in French
CPU Usage
I'm new to the softward. Running v12.
Auslogic is running in the background, I guess. (I didn't start any actions since my recent reboot.)
It's using between 25 and 40% of my CPU capacity. I DO NOT want that to happen. If something's running on its own, how do i schedule it to run during the night.
Why is it doing that? What's running? How can I keep it from starting a process on it's own.
(I know i can hit "End task" in Task Mgr, but I wanted to know how to prevent this in the future.)
Thank you,
SjK
MSFS e Windows10 PRO
Boost Speed 12 running very hot
Not really settings. See below!
When running, Boost Speed 12 R 12.0.0.2 and Bit Replicator run very hot with littlel or no explanation! I realize that at start up they will kick in. Later it should not be active.
After a scan, the system is showing 51% on BoostSpeed?????
What is going on?
Buddy Seigel
Must re-enter product code in Fences after weekly scheduled maintenance
Hello,
Boostspeed runs every Sunday morning as part of scheduled maintenance I set-up. After it runs, I am prompted to re-enter my product key for Fences. I do this and Fences works fine. This is a nuicance though as I should not need to do this - the Fences registration is valid. Given the timing is consistent, I am assuming Boostpeed is causing this issue.
Several weeks ago, I did exempt my Anti-Virus software from scanning the Fences folder which contains the registration certificate. However, the prompts continue.
If Boostspeed is indeed causing this issue, is there a way to have it avoid removing/maninpulating the registration of this software so I don't have to re-enter the product code weekly?
Attached is the dialogue box that appears requesting to re-enter the product key.
Thanks,
Rich Sullivan
Running a scan
When I run a scan to clear disk space it always gets stuck at the same point for 30 - 45 minutes.
Unused application files
C\windows\software distribution\datastore\logs\edbtmp.log
Could you help me resolve pleaase.
адаптер блютуз
Deep disk cleaner
Bonjour
Un message m'indique que Deep Disk Cleaner ne peut pas étre lancé lors du démarrage de Boostspeed. Comment puis je le réinstaller ?
Merci de votre réponse.
Cordialement
Laurent MESNIER
If the internet is cut off around the world
how offline activation future / BOOSTSPEED 12 PRO / key /
New in blog
See allRecommended
DOWNLOAD NOW
Download size: 12,8 Mb