Not able to install an upgrade for Boostspeed 12.2.0.0
After completion of the upgrade software, the Help box remains showing my Version as 12.2.0.0
проблема с регистрацией
До недавнего времени проблем не возникало. Последние несколько дней слетает активация, каждый раз при открытии программы предлагает активировать ПРО версию, после ввода ключа выскакивает окно, говорящее, что программа активировани, версия ПРО, но в самой программе никаких изменений нет, кнопка "Активировать ПРО" не исчезает, и в "помощи" ропять то же самое. Что делать, как решить проблему?
Drive C: - Reports Disk has errors
Despite the statement that the report provides details on disk error check AND REPAIR RESULTS, the report simply states that my C:Drive has errors.
There is no indication as to what the errors are or that they have been repaired; on the contrary the errors have not been identified nor have they apparently been repaired.
How do I find out what the errors are and how do I repair them?
Regards, Harry McBride
System Information Report
ID: 05
Name: Reallocated sector count
Value: 134
Worst: 134
Threshold: 140
Raw Data: 522
Status: Prefail
What does this mean and how do I fix it?
Delete wrong user
Want to delete wrong choise
Unable to activate Auslogics Bootspeed 12 PRO Version
Windows refusing access as administrator
Could not activated my license
Program not registered
Thank you
Activating Software Problem
I have now come to the end of my tether with this piece of software. I have been sent a Registration Code because the software I purchased on the 14 Dec 2021 keeps on asking me to Activate Pro Version. I removed the programme from my computer and started afresh. The programme dowloaded and the after putting in my Licence Key it advised me that the programme was registered. However, there is white writing on a green backgroumd in the bottom right hand corner stating: Activate Pro Version (when pressed advises what you get with the Pro version - which I have already purchased!) I have added this as an attachement on an MS Word doc.
Carl Bruce
BOOT SPEED PRO
I HAVE RENEWED MY BOOT SPEED SUBSCRIPTION BUT I CAN'T PERFORM CERTAIN FUNCTIONS I AM ASKED TO TAKE PRO VERSION WHILE I HAVE ALREADY PAID THE BASIC VERSION HOW TO UPGRADE TO THE PRO VERSION WITHOUTPAYING THE 50 EUROS MORE ?
LICENCE N°:
THANK YOU
Aktivation not Possibel
I did try to activate the pro version.
Reslult: The product has been activated
But in realatiy is the green botten still here and its not working as should when activated.
Regards
Kurt
Auslogics 12 is blocked by Windows 10
My Auslogics 12 is blocked by Windows 10. What can I do to fix this problem? And I cannot to set my Auslogics license key. I have just a basic version of programm now.
Программа была заблокирована администратором
About Auslogics BoostSpeed 12
Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします
Hirosuke Kajiyama
Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします
License key ライセンスキー：
Auslogics BoostSpeed 12
Pro version ?
Plus the last time i used driver updater it updated my pc then restarted it and it would not boot up no matter what i tried, I then had to reinstall windows with a backup. not used driver updater since.
Thank You.
Admin. Blocked
Thank You
James Elder
WDF_Violation every time I shut down W10-pro
every time I shut down W10-pro, the system after ~7 seconds I click on the shutdown button and W10 starts the procedure it shows the blue screen with WDF_Violation error message. I have updated all the drivers, but the issue remains.
I have this problem since a certain W10 update (in fact when I reverted that update the problem desappeared).
Thanks a million, in advance for your reply!
Cheers,
Alex
как с помощью программы удалить все следы работы и папки adobe flash player
как с помощью программы удалить все следы работы и папки adobe flash player
The Select full screen/ minimise button is no longer showing at the top right of the screen.
When I first in stalled boost speed 12 it worked fine but now the minimise button is no longer showing. I did implement some of your window 10 tweaks, so could any of these be the reason.
Also I have tried the reinstall the version version 12.0.02 and installed version 12.0.0 but although the button is there at the start, it soon disappears and I can not get it back.
Boostspeed 11?? version 10 exists already
My version of 10 expires in December 2019. Do I have take out new contract and forget about balance on version 100>>
Otherwise I have to keep version 10 until december and then switch???
regards
Eddie
Auslogics BoostSpeed 10
XXXXX-25AX7-GEWGG-9J4AA-XXXXX - expires december 2019
ERROR 80073712
IMPOSIBLE FOR ME REPAIR
PROBLEM DOWLOAD WINDOWS UPDATES.
THANK YOU.
Auslogics 12 is blocked by Windows 10
My Auslogics 12 is blocked by Windows 10. What can I do to fix this problem? And I cannot to set my Auslogics license key. I have just a basic version of programm now.
температура
installing on more than one device
Admin. Blocked
Thank You
James Elder
Where can I go to initiate cache clearing?
Occasionally it pops up. But if I wish to initiate when it has not popped up? Where do I go.
Thank you.
Access to program affeced by scan
It then requires me to re-register that I am entitled to use the program using exactly the same password every time.
Surely it is possible for the scan to bypass making any changes like this....
EL SISTEMA EN GENERAL TARDA MUCHO EN RESPONDER
que es lo que se deve hacer.
AusLogic # BoostSpeed users
Where does display state the maximum number of user available with the product key assigned; and where does it show how many have been assigned; and where do they give the user name of the assigned
Auto Restore to earlier date
Is there a way AL BS can be used to create a system restore point (like in windows) to an earllier date?
Corel Paintshop Pro 2020
It seems each time Boostspeed runs, I have to reload Corel Shop 2020 because it will not statr. I thought this might be a corel problem because the same thing was happening with the previous version.
However, the issue is happing with the 2020 version.
There miust be some issue with the files that BoostSpeed is negating.
BoostSpeed
Hi,
1 . There was NO Sucategory that matched my Question so I picked 3D Builder <-- ignore please.
This morning was the second time that my laptop was taken over by a “disk repair” function that I think is linked with BoostSpeed. I start up my laptop and something begins churning away telling me that it will take 8 hours to complete. Actually it could not tell time correctly because it took 3 ½ hours before I could use the laptop.
Q: How to prevent this happening again? At least giving me the option to say OK do it now or wait?
Thanks,
Michel
New in blog
See allRecommended
DOWNLOAD NOW
Download size: 12,8 Mb