1897 questions

Not able to install an upgrade for Boostspeed 12.2.0.0

I am unable to install the upgrade for Boostspeed 12..2.0.0 to 12.2.0.1
After completion of the upgrade software, the Help box remains showing my Version as 12.2.0.0

921 views
Jan 27, 2022 at 03:38 PM

проблема с регистрацией

Купил лицензию на ABSpeed 26-го июля 2021 года. Действительна ещё 181 день.
До недавнего времени проблем не возникало. Последние несколько дней слетает активация, каждый раз при открытии программы предлагает активировать ПРО версию, после ввода ключа выскакивает окно, говорящее, что программа активировани, версия ПРО, но в самой программе никаких изменений нет, кнопка "Активировать ПРО" не исчезает, и в "помощи" ропять то же самое. Что делать, как решить проблему?
970 views
Jan 26, 2022 at 10:24 PM

Drive C: - Reports Disk has errors

The subject report appears in the attached PDF file. APPARENTLY YOUR SYSTEM DOESN'T ACCEPT PDF FILES SO THE FOLLOWING INFORMATION WILL HAVE TO DO.

Despite the statement that the report provides details on disk error check AND REPAIR RESULTS, the report simply states that my C:Drive has errors.
There is no indication as to what the errors are or that they have been repaired; on the contrary the errors have not been identified nor have they apparently been repaired.

How do I find out what the errors are and how do I repair them?

Regards, Harry McBride
618 views
Jan 26, 2022 at 08:59 PM

System Information Report

The System Information report for my external backup hard drive above shows the following;

ID: 05
Name: Reallocated sector count
Value: 134
Worst: 134
Threshold: 140
Raw Data: 522
Status: Prefail

What does this mean and how do I fix it?
988 views
Jan 26, 2022 at 08:33 PM

Lizenz

Warum wurde meine Lizenz gesperrt ich kann das Programm nicht mehr öffnen ich habe im Dezember 2021 verlängert und gekauft. Bitte um Freischaltung. Danke
829 views
Jan 26, 2022 at 07:56 PM

Delete wrong user

After boot. Windows ask for user. To choise of two with same name en than pin code.
Want to delete wrong choise
864 views
Jan 26, 2022 at 04:58 PM

Unable to activate Auslogics Bootspeed 12 PRO Version

I have been having issues now for more than a week I keep getting the message the my PRO Version is not atctivated despite me doing it countless times. Please can you advise what to do.
830 views
Jan 26, 2022 at 12:46 PM

Windows refusing access as administrator

Why has Windows started to refuse access to my newer version of Defrag? I have had to take it off my laptop and reinstall an older version to attain use of my perfectly safe and legitimate copy
808 views
Jan 26, 2022 at 09:34 AM

ユーザー制御

デスクトップのショートカットから、ブーストスピード開きません。タスクバーからなら開くのに。ユーザー制御ウィンドが出てダメです。ドライバーアップデーターのショートカットも同じです。また、時々ですが、ブーストスピードが開いた時に、すべての画面が白紙画面になります。
アカウントとかセキュリティーの調整をしてみたのですが変わりません。インストールしなおしても変わりません。セキュリティソフトが干渉でもしているのでしょうか?何か良い方法はないでしょうか、お願いします。

1295 views
Jan 26, 2022 at 09:10 AM

Could not activated my license

I have bought the pro license at July 2021 and used this software until mid of january. Suddenly the software ask me again for license code, and after I input my code, the software still on free version mode and not changed to PRO version. Please assist me regarding this problem
966 views
Jan 26, 2022 at 02:49 AM

Program not registered

As you can see in the attached show is registred, but the program says need to rgister for pro version. Please advise as I have renewed the license in december.

Thank you
693 views
Jan 25, 2022 at 08:58 PM

Activating Software Problem

I have now come to the end of my tether with this piece of software. I have been sent a Registration Code because the software I purchased on the 14 Dec 2021 keeps on asking me to Activate Pro Version. I removed the programme from my computer and started afresh. The programme dowloaded and the after putting in my Licence Key it advised me that the programme was registered. However, there is white writing on a green backgroumd in the bottom right hand corner stating: Activate Pro Version (when pressed advises what you get with the Pro version - which I have already purchased!) I have added this as an attachement on an MS Word doc.
Carl Bruce

Content hidden to protect privacy

1019 views
Jan 25, 2022 at 05:18 PM

BOOT SPEED PRO

I HAVE RENEWED MY BOOT SPEED SUBSCRIPTION BUT I CAN'T PERFORM CERTAIN FUNCTIONS I AM ASKED TO TAKE PRO VERSION WHILE I HAVE ALREADY PAID THE BASIC VERSION HOW TO UPGRADE TO THE PRO VERSION WITHOUTPAYING THE 50 EUROS MORE ?

LICENCE N°:

Content hidden to protect privacy


THANK YOU

850 views
Jan 25, 2022 at 02:26 PM

Aktivation not Possibel

Hi

I did try to activate the pro version.
Reslult: The product has been activated

But in realatiy is the green botten still here and its not working as should when activated.

Regards
Kurt
1215 views
Jan 25, 2022 at 11:00 AM

Auslogics 12 is blocked by Windows 10

Hi!
My Auslogics 12 is blocked by Windows 10. What can I do to fix this problem? And I cannot to set my Auslogics license key. I have just a basic version of programm now.
1061 views
Jan 25, 2022 at 08:52 AM

Программа была заблокирована администратором

Вероятно возникла проблема с цифровой подписью файла integrator.exe. Программа не может быть активирована лицензионным ключом.
521 views
Jan 25, 2022 at 08:36 AM

About Auslogics BoostSpeed 12

Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします 

Content hidden to protect privacy

978 views
Jan 25, 2022 at 06:59 AM

Hirosuke Kajiyama

Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします 

License key ライセンスキー:
Auslogics BoostSpeed 12

Content hidden to protect privacy

1077 views
Jan 25, 2022 at 06:46 AM

Pro version ?

Noticed my Boostspeed progaram has the activate pro version on the bottom of the screen when i have already registered it.

Plus the last time i used driver updater it updated my pc then restarted it and it would not boot up no matter what i tried, I then had to reinstall windows with a backup. not used driver updater since.
Thank You.
971 views
Jan 25, 2022 at 06:01 AM

Admin. Blocked

When trying to open Boostspeed, I am getting a popup stating Admin Blocked, go to an Administrator Integrator.exe. How can I clear this. If I re-download the basic program will open, when I type in my registration code, I'm sent to the store pager in AOL. Any help with this problem would be appreaciated.
Thank You
James Elder
1059 views
Jan 25, 2022 at 05:56 AM

Disk Drill 4.1.551.0

Estoy intentando desinstalar esta aplicacion, que ralentiza mi PC, y no lo consigo. Agradeceria sus instrucciones y comentarios.
Me estoy iniciando con su BOOSTSPEED y me parecen excelentes todas las soluciones que ofrece.

Gracias anticipadas y un saludo.

Carlos Martinez
1809 views
Feb 07, 2022 at 05:45 PM

Auslogics Blocked by User Account Control

Hi

Please can I ask for your help as I cannot access my Auslogiccs BoostSpeed 12 on my computer? I get a flagged message that User Control Account has blocked access.

Can I take this opportunity to wish you and your colleauges and families a great New Year.

Kind regards
Trevor
1799 views
Jan 21, 2022 at 03:50 PM

Adding WiFi to HP EliteDesk G2 TWR that does not seem to have WiFi built-in

I have HP EliteDesk G2 TWR with motherboard specs per below. I need to have WiFi as a back-up to existing LAN hardwired internet connection. It does not seem to have WiFi as option built-in. I bought Netgear Model A7000 AC1900 WiFi USB adaptor, and i installed software etc,,, but that does not seem to work either. Per motherboard specs below there would appear to be two open slots available.

1. Any suggestions as to getting the external WiFi USB adaptor that I already bought to work?

2. or do I need to get/install some sort of PCI wifi adaptor/card?
Or what... help?

Slot3 / X1PCIEXP2: Available
Slot4 / X4PCIEXP: Available


Name, Value
Motherboard
Manufacturer: HP
Product: 8053
Version: KBC Version 05.39
Serial Number: PESUC0ECY9Y2X0
Ports: 38
Slots: 4

Ports
Port Connector 0: Keyboard Port
Port Connector 1: Mouse Port
Port Connector 2: Serial Port 16550A Compatible
Port Connector 3: Serial Port 16550A Compatible
Port Connector 4: Video Port
Port Connector 5: Video Port
Port Connector 6: Video Port
Port Connector 7: Network Port
Port Connector 8: Audio Port
Port Connector 9: Audio Port
Port Connector 10: Audio Port
Port Connector 11: Audio Port
Port Connector 12: Audio Port
Port Connector 13: USB
Port Connector 14: USB
Port Connector 15: USB
Port Connector 16: USB
Port Connector 17: USB
Port Connector 18: USB
Port Connector 19: USB
Port Connector 20: USB
Port Connector 21: USB
Port Connector 22: USB
Port Connector 23: USB
Port Connector 24: 8251 Compatible
Port Connector 25: 8251 Compatible
Port Connector 26: 8251 Compatible
Port Connector 27: 8251 Compatible
Port Connector 28: 8251 Compatible
Port Connector 29: None
Port Connector 30: None
Port Connector 31: None
Port Connector 32: None
Port Connector 33: None
Port Connector 34: None
Port Connector 35: None
Port Connector 36: None
Port Connector 37: Keyboard Port

System Slots
Slot1 / X16PCIEXP: In Use
Slot2 / X1PCIEXP1: In Use
Slot3 / X1PCIEXP2: Available
Slot4 / X4PCIEXP: Available

BIOS Details
Name: N01 Ver. 02.47
Manufacturer: HP
Version: N01 Ver. 02.47
Copyright: HPQOEM - 0
Date: 4/28/2020
Size: 16,384 KB
1784 views
Sep 16, 2020 at 05:48 PM

Hard Disk usage 100 percent

Why The Hard Disk of windows sometime use at 100 percent and really slow down computer ?

1770 views
May 14, 2020 at 01:51 PM

changing language

Hello

I updatet to boost speed 11 a couple of days bevor .
Is it possible to change the language into german ?
I cannot read englisch as a river is floating, i only use schoolenglish.
In boostspeed 11 there's a many stuff included, that is new for me.
I understand the window of the older version better .

greetings bottlecup

1767 views
Oct 14, 2019 at 10:47 AM

Slow browser and switching applications

I believe I have run all of the BoostSpeed tools. However, my system is now just slow...

There are long delays when switching apps (i.e., I had to close BoostSpeed with Task Manager and reopen it to avoid a interminal hour glass when opening this form)

Opening new broswer tabs can take 10s of seconds to forever. i primarily use firefox and have tried clearing the cache and cookies. The loading indicator on the tab just keeps cycling, sometimes even after the screen refreshes it keeps cycling.

I use Norton, but I do not think it is blocking anything. One thought, I may have unintentially disabled a needed start-up application I checked the interet speed here and its 1MB down and 5MB up... At home I have the same problems with >100MB. I'm using a new Lenovo Yoga , windows 10 PC.

Let me know if I can run/export anything to help you..

Thank you, Jim Winer
1754 views
Nov 24, 2020 at 03:41 PM

OpenAL32.dll.

Пожалуйста посоветуйте файл OpenAL32.dll. последствия

1749 views
Apr 19, 2020 at 06:26 AM

Настройка RDP

Windows Server 2016. Как настроить удаленный доступ к этому серверу через RDP? Все где надо включено, а доступа нет. Выдает ошибку "Произошла внутренняя ошибка". Причем к другому серверу с Windows Server 2016 доступ есть.

1738 views
Feb 11, 2020 at 06:22 PM

Language Hangul cannot be written

Language Hangul cannot be written

1732 views
Jun 05, 2020 at 10:35 AM

Offline Defragmentation

Is it possible to do offline defragmentation of system files using BoostSpeed 11

1719 views
Feb 07, 2020 at 12:13 AM

Unable to reclaim disk space on WD My Cloud Home

Dear sirs,

I've bought a WD My Cloud Home. The device states that from a storage of 7 TB there is only 1.4 TB available, although I have only stored 3.5 TB on the drive apparently it is using hidden folders for a backup process but as I also have a MyBook installed I can't find any of the settings to disable the backup process.

Sicko
1718 views
Dec 07, 2020 at 05:21 PM

Dashboard popup

Hello,

I have asked this question before and the help I got didn't help one bit.

The Dashboard keeps popping up at the most inconveniant times to the point of be annoying.
When the Dashboard pops up everything stops until I acknowledge it or close it.
It always pops up while I'm gaming, while working with photos, reading my e-mail, and even while I'm working with my annimation programs and interfears with anything else to the point I'm beginning to think you created a virus program.
This has got to stop.
The other previous versions never did this and Im not the only one having the same problem.
I have several friends and family members I talked into buying this program who are having the same problem with theirs also.
Thats Seven (7) people besides me who are about to ask for refunds if we can't stop the Dashboard popups.
I have tried everything I could find from unchecking notices to automatic maintinance and the popups still continue.
Even the suggestions you gave me didn't help stop the pops.

Our 60 days is coming up on the 17th of this month for asking for our refunds.
Help us or refund us.

Thanks again, I think,
Stephen M.

1718 views
Jun 08, 2020 at 08:17 PM

Having to re-enter my Microsoft account info many times.....

Like your program. However it knocks off all Microsoft "connections" making me have to re-enter my PW frequently to stay signed in to my account. Getting annoying.
1711 views
Aug 29, 2019 at 02:39 PM

BLUE SCREEN IN WIN10 PRO IN RESTART AFTER INSTALLING MICROSOFT FLIGHT SIMULATOR ONLY

Hi there , don't know what to do but after installing Microsoft Flight Simulator 2020 windows unstable and when i need to restart PC i got blue screen crash. After uninstalling FS2020 everythink is back in normality. Cant find the answer on google , nor Microsoft support service . Ths if you help me with that , cheers.
1691 views
Jan 31, 2021 at 11:24 AM

Microphone went off

after doing an optimization, my mic won't work anymore .. how can I fix that ?

1689 views
Feb 24, 2020 at 12:30 PM

Bootspeed 13

What about Bootspeed 13? Is it possible to do somethings to have Bootspeed 13 in place of Bootspeed 12 without payement?

1686 views
Feb 25, 2022 at 11:38 PM

スキャンするとリモートデスクトップの履歴が消えてしまう

お世話になります。
リモートデスクトップを使って別のコンピュータと接続しています。
スキャンを実行すると記録されていたIPが初期化されて無くなります。
除外リストに「HKEY_CURRENT_USER\Software\Microsoft\Terminal Server Client\Default\*」を設定しましたが、効果がありません。
他に、Microsoft Print to PDFの保存に使用したフォルダがスキャンするとドキュメントフォルダに初期化されてしまいます。これも除外リストに
「HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders\*」を指定したのですが、効果がありません。
このようにWindowsが保存しているIPやフォルダを残すにはどうすれば良いですか。

1683 views
May 23, 2020 at 03:02 AM

Acronis

Cannot install Acronis S/W. Cannot uninstall Acronis Common Components

1680 views
Jan 09, 2020 at 03:51 PM

How much RAM my computer need

currently my computer pc installed with 8GB ram..can i add another 8GB RAM for my computer..so totally will be 16GB RAM..how does i know my pc support 16GB RAM and can work well with my computer performance..thank you..

1676 views
Nov 25, 2019 at 02:06 AM

Microsoft Visial C++

Hi

I keep getting a message pop up (see attatched)

I have no idea what I have done to cause it to pop up, I also have no idea how to cure it. I have the latest DirectX and as far as I know everything else is up-to-date including Windows.
Most of the time I just hide the message because if I cancel it, it pops back up. However it is now preventing me from launching Unreal Engine so I cannot ignore it any longer I need to sort it out.

Please priovide your answer in simple terms as although I am computer savvy I am no master under the bonnet,programming etc.

1674 views
Feb 09, 2020 at 03:47 PM