1859 questions

After Auslogics did some repairs, alot doesnt work

I really cant type out the problems im having all because there are so many... I just got a Performace Scan message from Auglogics as I am typing this message stating "its been 6 days since your last scan" but im afraid to run anything on auglogics. I need a Tech that knows computers very well to remote connect to my laptop and see if they can fix some if not all of these problems that came about. I will list some of the problems I am encountering but first I want to say that everthing did work before. I used to be a windows insider but now my diagnostic data is set to basic and i cant chage it to full.. In yellow, at the top of the windows settings page it now says that I do not have authorization or this setting is being controlled by your organizer. I dont have an Organizer. Ive never seen that Yellow Font orginazation control lock or what ever it is, ever before until about a week ago when i ran the last scan with auglogics. Its not just on that Diagnostic sending part, I find that I get that controlled by my orginazation lock out on all kinds of settings and controls. I work as a heavy equipment machinery driver and work doesnt even have comptures, im not in school or connected to any school account.. I bought my own brand new laptop about 3 months ago, its connected on my home network Optimum Internet and my outlook account isnt attached to anything but my Xbox One X and like i said it was never there before... I cant type in any Windows app or the task bar without having to hit the windows key + R and enter C:\Windows\System32\ctfmon.exe and then it works, but needs to be done everytime i turn my laptop on... I used to always have my Samsung Fit 64 gig tiny flat USB and my SDXC 64 gig 170Mbps read/write card set to enable read and write and catch. Not Readyboost.. but now i cant do that. both USB and SDXC are all over the place.. I have gigabyte speed from optimum and yet my whole computer runs slow... I cant type in the search bar and get my apps show up, or update, or power plan. nothing... AND for some reason, Ive NEVER had 4 accounts. when i turn my laptop on i can only log into my account like normal. but then when you look at the account users, theres administrator, then there is like 3 accounts of my name.. i dont know what to do

1434 views
May 06, 2020 at 04:31 PM

defrag ssd

you product wants to defrag and tweak my ssd is this safe?

1225 views
May 06, 2020 at 09:29 AM

Запуск Виндовс

Доброго времени суток. После пользования вашим продуктом у меня стало чтото не то с загрузкой виндовс. Сначала все идет нормально. Загрузка биоса. Потом заставка загрузки виндовс. Потом у меня экран отключается и в таком состоянии минут 15. Экран от ПК не получает никаких сигналов. Как мне это отключить? Что бы была нормальная загрузка рабочего стола после заставки загрузки виндовс? Это началось сразу же после использование Ауслоджик Буст Спида. Откат системы я сделать не могу.

1433 views
May 06, 2020 at 05:50 AM

Démarrage anormal

Bonjour,
J'utilise une unité ASUS N73SV sous Windows10 qui me donne entière satisfaction.
Logiciel de sécurité Kaspersky, Firewall Windows, Analyses périodiques par Auslogics Anti-Malware.
Aucune attaque virale jusqu'à aujourd'hui.
Depuis un an environ la touche habituelle de demarrage - au dessus du clavier à droite - ne fonctionne plus; le pc ne demarre pas.
Pour demarrer le pc, il faut appuyer sur la touchei se trouve tout au dessus du clavier à gauche, donc la symetrique de l'autre.
Mais au lieu d'activer directement Windows, cela active le Bios (son de boot tres fort) puis Windows (son de boot normal).
J'ai entrepris plusieurs fois de comprendre et réparer mais sans succès.
Je souhaite revenir à un fonctionnement normal.
Merci de votre aide.
Kind regards,
Jean Farny
1178 views
May 03, 2020 at 04:35 PM

Auslogics registry cleaner

Can certain categories be excluded when using registry cleaner?
REASON: after using registry cleaner I get an error message when I open MSMoney. I can correct this using Money setup, but registry cleaner does something to reverse my setup correction.

System: Windows 7 Home Premium

1385 views
Apr 29, 2020 at 10:41 PM

Отвалился BlueTooth

Добрый день
на обоих моих ноутбука пропал блутус. Возможно что то позволил исправить программе не проконтролировав. Как включить блютус снова? В скрытых девайсай его вижу. Система предлагаетпереустановить драйвер, но дело явно не в этом.

1460 views
Apr 29, 2020 at 06:00 AM

Здравствуйте, программа Auslogics не запускается вместе с включением компьютера, как исправить?

Здравствуйте, программа Auslogics не запускается вместе с включением компьютера, как исправить?

1265 views
Apr 29, 2020 at 01:50 AM

Disco duro se encuentra al 100%

Hola, ultimamente he notado que mi disco duro se encuentra al 100% y las aplicaciones se abren lento, cuando tenia windows 7 no me pasaba esto supongo que es por el sistema operativo tengo windows 10 pro, ¿habra una solucion para bajar el uso del disco ?

1268 views
Apr 28, 2020 at 02:59 AM

POST interruption

What could be the problem when most of the time during Boot on Message "Warning System Boot fail or post interruption".

Press continue or press del to load bios setup.

1209 views
Apr 27, 2020 at 08:51 AM

Why auslogics boostspeed can't solve this ?

Hello. I'm a regular gamer, but when I play a game, no matter which one, my computer always crashes. Everyday, for months. I have used boostspeed 11 many times to fix this, but despite what Auslogics promised, my computer is no more stable than before. Nothing has changed. So I’m wondering what it pays to pay for software that promises to take care of our computer’s system, if it’s just basic operations that don’t solve anything. If nothing changes, I will not renew my subscription. If you need information about my hardware, don't hesitate to ask me. Thank you. Sincerely, Arnaud

1289 views
Apr 27, 2020 at 08:32 AM

Malware

How can I minimize the picking up of malware by using your toolkit?

1711 views
Apr 25, 2020 at 10:50 PM

Temperature

I am using Windows 8.1. Is there a provision in BoostSpeed 11, for setting the Disk/Processor Temperature at which the PC will switch off?

1409 views
Apr 22, 2020 at 04:00 PM

ms-resource: ProductName を取り除きたい

Windows10 バージョン 2004 (OSビルド 19041.207)
スタートメニューのその他グループに

"ms-resource: ProductName"  を取り除きたい


このアプリは開かず、アンインストールもできない

2877 views
Apr 22, 2020 at 01:56 PM

sudden shutdown

why is my pc suddenly shuts down without warning every 10 to 20 minutes

1332 views
Apr 20, 2020 at 08:19 AM

OpenAL32.dll.

Пожалуйста посоветуйте файл OpenAL32.dll. последствия

1664 views
Apr 19, 2020 at 06:26 AM

Windows 10 logon password via Auslogics

Hello!
I am not new to Aulogics - great product! However, I am a new Aulogics 11 user. In Aulogics, in trying to bypass Windows 10 Logon on my Lenovo, I believe the password that was pre-autofilled may have been incorrect? I chose by-pass Windows logon, however when my laptop restarts the first User screen tells me my Password is incorrect. How do I fix this in Aulogics? Any help would be appreciated! ~Catherine Trager

Content hidden to protect privacy

1514 views
Apr 18, 2020 at 05:41 PM

Повышенное потребление ресурсов

Периодически всплывает уведомление о повышенном потреблении ресурсов. По клику открывается Task Manager, из информации в котором я понимаю только, что процессор загружен на 100%, оперативная память тоже. Я и сам замечаю, что компьютер часто тормозит и процессор нагревается до 50 градусов.
Компьютер новый (моноблок Lenovo, W10), программ в автозагрузке не более десяти. Прежний моноблок, которому более пяти лет с W 8.1, на котором установлено гораздо больше программ, ведёт себя гораздо резвее.
И что со всем этим делать? В Task Manager не вижу каких-либо инструментов. Уж не сама ли ваша программа Auslogics Boost Speed 11 тормозит систему?

1011 views
Apr 18, 2020 at 05:17 PM

Кэш второго уровня

Здравствуйте, в прошлых версиях была возможность через Tweak Manager включить исплользование кэша втрого уровня. В 11 версии неполучается найти данную функцию. Подскажите как это сделать.

1423 views
Apr 18, 2020 at 10:31 AM

System Restore

Desktop just started on off when sitting in sleep mode, A tried to update Microsoft Windows 10, took update, Still on off multi. times daily B, tried System restore tells me could not preform System Restore Still on ,off mode , C What setting in resuce center would fix this System Restore problem.s all from same date around System 3 or 4 from same date close to restore point date. Is Boostspeed 11 causing this problem

1412 views
Apr 16, 2020 at 06:59 PM

help needed

Hi, I don't think it's about you, but if you can help me I'll be very grateful.
i have two devices
1.micro sd 16GB apacer
2.flash memory 16GB apacer
these two device now is WRITE PROTECTED and i have download every tools and tricks exist in world for flash these but no one responding.
now pls pls pls pls pls pls help me in my country there is no official represent from apacer or others pls help me tnx a lot and i very respect u and ur works and apps

respectful.TOOFAN

1351 views
Apr 16, 2020 at 08:42 AM

табло на раб стол

как поставить табло с cpu ит.д- на рабочем столе мини экран
915 views
Mar 02, 2022 at 07:40 AM

no default app

hello,my laptop has had an issue where the settings app does not open because it does not have an app associated with it. How can i fix this issue? It does not open at all.

913 views
May 08, 2021 at 03:09 PM

Windows 11

Will BoostSpeed 12 Pro work using Windows 11?
Any known problems using wndows 11?
913 views
Dec 30, 2021 at 03:20 PM

Device stops and freezes reqularly

My device is a very old one but still works properly, But these Days it starts To freeze reqularly and sometimes crashes, This only happened when i upgraded my laptop to windows 10, What should i do to prevent it

913 views
Aug 07, 2020 at 05:20 AM

Как корректно обновить программу Auslogics?

Здравствуйте. Сегоодня вышла новая версия программы и возникает резонный вопрос - как установить обновление? Придется полностью удалять старую версию (с помощью спецпрограмм типа Revo) и устанавливать новую? Или есть еще другой вариант?

912 views
Oct 07, 2020 at 08:12 AM

совметимость

Здравствуйте.
Я не однократно обращался с вопросом блокировки вашей программы антивирусной программы DrWeb. Скажите что то решешается и есть ли решение? Спасибо за помощь. Владимир.

912 views
Jan 03, 2021 at 08:53 AM

Не отображаются элементы сайтов

Здравствуйте.
После оптимизации Auslogic BoostSpeed 11 перестали отображаться в браузере на сайтах: подложки карт местности, он-лайн графики.

912 views
May 12, 2020 at 03:14 PM

Right Click Menu

Hello, My question is this: From time to time when I right mouse button click on a file on the desktop or in a folder the computer just freezes with the little blue circle turning for like 20-30 seconds before the right click menu will pop up, it does not do it all the time and seems random and there does not seem to be a reason for this, I have followed all the tutorials online that I could find and that is even why I purchased your software but nothing seems to solve this annoying issue, hopefully you can help. I am also attaching a screen shot to my computer spec details
911 views
Feb 24, 2021 at 07:21 PM

display settings/function

My 'brightness control' slider dissapeared in Windows 10 and I can't figure out a way to get it back. Now the screen just stays fairly bright all the time. There also isn't one in the notifications tab that I could us instead of the missing one on the desktop.
911 views
Nov 23, 2020 at 02:01 PM

file recovery

I used the file recovery service - your program found about 46000 deleted files (be somebody or a virus). How can I tell the program to recover all the files, w/o marking the 46000 foles one by one?

910 views
Jul 15, 2021 at 01:12 AM

File Shredder

I have added file shredder to recycle bin. However, when I try to delete file with file shredder, boost speed opens it large box with deletion options. Is there any possible way to delete file from recycle by using file shredder without opening the entire software ?

910 views
May 23, 2020 at 12:40 PM

High Resource Usage Detection

I keep getting a High Resource Usage Detection message even when I haven't got a lot of programmes open, and my laptop gets very hot. I have looked through Auslogics Boost Speed 11 Menu but can't seem to find a tool that may help with this.
Could you please advise which tool I should be looking to use in order to put this problem right.

909 views
Sep 21, 2019 at 04:17 PM

Office 2016

Whenever I use the tools (scanner, cleanup), afterwards I always have to do a repair (reinstall) of my Office 2016 products. How to clean my computer without messing up Office 2016?

909 views
Oct 16, 2019 at 05:07 AM

I cannot hear anything on videos etc

I used malwarebytes to eliminate issues regarding popups and since then I cannot hear any videos. I have tried everything from chrome settings (BTW no sound on Explorer or Edge either) up to and including this software to correct. However to no avail.

There must be something I am missing...please help.
Bob
909 views
Aug 14, 2020 at 02:57 PM

Cpu Usage

Something is not working correctly. There is a high cpu usage and I am unable to figure out why. There seems to be an invisible ammount of cpu I cannot see? There is only 1 user on the machine and the cpu usage is more than the users cpu usage how does that make sense and how can I fix and optimize the cpu usage?
908 views
Nov 21, 2019 at 08:36 AM

Auslogics Boostspeed 12

My computer is a 64 bit machine which can run 32 bit programs. My computer is running Boostspeed 12 using 32 bit versions of all its programs instead of the 64 bit version. Is this the reason why my computer is taking over an hour to startup in the morning with the disk using 93% to the usual 100% all the time? Or, is the problem due to too much disk thrashing since it appears that all the startup programs start up immediately instead of being staggered per the scheduler? This problem started when I had to uninstall Boostspeed 12 and reinstall it per the Auslogics support person.
907 views
Dec 14, 2021 at 05:32 PM

Interesting drive

MSR, MMIO, Microcode and FSB? Clock.
907 views
Nov 29, 2021 at 02:37 AM

Cat Mode

Dear sir/madam

I am in Cat mode now, how do I disable Cat Mode?

Thank you
Arjuna

907 views
Dec 02, 2020 at 05:34 AM

windows 10 freezes

after using the cpu for a few minutes the windows 10 freezes all of a sudden and has to be restarted again.What is the best solution to resolve this problem.

906 views
Nov 29, 2020 at 09:32 AM

Браузер Opera

После сканирования удаляет все пароли как отключить

905 views
Apr 19, 2021 at 05:41 AM