Not able to install an upgrade for Boostspeed 12.2.0.0
After completion of the upgrade software, the Help box remains showing my Version as 12.2.0.0
проблема с регистрацией
До недавнего времени проблем не возникало. Последние несколько дней слетает активация, каждый раз при открытии программы предлагает активировать ПРО версию, после ввода ключа выскакивает окно, говорящее, что программа активировани, версия ПРО, но в самой программе никаких изменений нет, кнопка "Активировать ПРО" не исчезает, и в "помощи" ропять то же самое. Что делать, как решить проблему?
Drive C: - Reports Disk has errors
Despite the statement that the report provides details on disk error check AND REPAIR RESULTS, the report simply states that my C:Drive has errors.
There is no indication as to what the errors are or that they have been repaired; on the contrary the errors have not been identified nor have they apparently been repaired.
How do I find out what the errors are and how do I repair them?
Regards, Harry McBride
System Information Report
ID: 05
Name: Reallocated sector count
Value: 134
Worst: 134
Threshold: 140
Raw Data: 522
Status: Prefail
What does this mean and how do I fix it?
Lizenz
Delete wrong user
Want to delete wrong choise
Unable to activate Auslogics Bootspeed 12 PRO Version
Windows refusing access as administrator
ユーザー制御
デスクトップのショートカットから、ブーストスピード開きません。タスクバーからなら開くのに。ユーザー制御ウィンドが出てダメです。ドライバーアップデーターのショートカットも同じです。また、時々ですが、ブーストスピードが開いた時に、すべての画面が白紙画面になります。
アカウントとかセキュリティーの調整をしてみたのですが変わりません。インストールしなおしても変わりません。セキュリティソフトが干渉でもしているのでしょうか?何か良い方法はないでしょうか、お願いします。
Could not activated my license
Program not registered
Thank you
Activating Software Problem
I have now come to the end of my tether with this piece of software. I have been sent a Registration Code because the software I purchased on the 14 Dec 2021 keeps on asking me to Activate Pro Version. I removed the programme from my computer and started afresh. The programme dowloaded and the after putting in my Licence Key it advised me that the programme was registered. However, there is white writing on a green backgroumd in the bottom right hand corner stating: Activate Pro Version (when pressed advises what you get with the Pro version - which I have already purchased!) I have added this as an attachement on an MS Word doc.
Carl Bruce
BOOT SPEED PRO
I HAVE RENEWED MY BOOT SPEED SUBSCRIPTION BUT I CAN'T PERFORM CERTAIN FUNCTIONS I AM ASKED TO TAKE PRO VERSION WHILE I HAVE ALREADY PAID THE BASIC VERSION HOW TO UPGRADE TO THE PRO VERSION WITHOUTPAYING THE 50 EUROS MORE ?
LICENCE N°:
THANK YOU
Aktivation not Possibel
I did try to activate the pro version.
Reslult: The product has been activated
But in realatiy is the green botten still here and its not working as should when activated.
Regards
Kurt
Auslogics 12 is blocked by Windows 10
My Auslogics 12 is blocked by Windows 10. What can I do to fix this problem? And I cannot to set my Auslogics license key. I have just a basic version of programm now.
Программа была заблокирована администратором
About Auslogics BoostSpeed 12
Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします
Hirosuke Kajiyama
Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします
License key ライセンスキー:
Auslogics BoostSpeed 12
Pro version ?
Plus the last time i used driver updater it updated my pc then restarted it and it would not boot up no matter what i tried, I then had to reinstall windows with a backup. not used driver updater since.
Thank You.
Admin. Blocked
Thank You
James Elder
проблема с регистрацией
До недавнего времени проблем не возникало. Последние несколько дней слетает активация, каждый раз при открытии программы предлагает активировать ПРО версию, после ввода ключа выскакивает окно, говорящее, что программа активировани, версия ПРО, но в самой программе никаких изменений нет, кнопка "Активировать ПРО" не исчезает, и в "помощи" ропять то же самое. Что делать, как решить проблему?
Right click loads too long on files and apps
And I have tried every possible method and still can’t solve it.
Program opening
My subcategory would have been the Boostspeed program but wasn't listed so I chose any in order to get the question submitted.
I am using Version 12 of Boostspeed on a Windows 7 platform. My question is: Why does it take so lone for the program to open when double clicking the icon from the Desktop?
que software utilizar para convertir word a Pdf y viceversa
como se abren archivos word de una carpeta sin que se conviertan a Pdf y viceversa
Could not activated my license
USB Flash Drive is corrupted and not readable
I have a corrupted USB drive and now I can't access anything on it. I don't care about the files on it now. I would like to know is there a way to UN-corrupt it in your tools. I would just like to be able to use it. It's a pretty new flash drive - only used a few times. I think I killed it when I pulled it out after it gave me a warning. I wasn't able to get the warning to go away.
Thanks.
Paul
Partition management
If it exists, please point me to it.
Thanks
Ed
504 Auslogics files designated as Malware
How can that be? Does Auslogics provide unsafe software?
Please remedy now!
File attached for your review
Remove write protection your software put on my new external drive
How do I remove write protection from my new segate almost empty drive so I can transfer stuff to it?
Auslogics Boostspeed 13 TRIMMING SSD Hang at 3% unable to complete SSD Optimization
D:\~DDSSDTRIMTEMP^0_1073741824{6BD97305-57AB-484E-A651-BC496157FFB7} (creates an associating Windows Media Player file) and is unable to complete the Optimization. At one time it moved 1% after 2 hours. This did not happen when running Boostspeed 12 Pro. When running Boostpeed 12 Pro the external SSD would complete Optimization.
Should Auslogics Boostspeed 13 Pro TRIMM command be Disabled when Optimizing SSDs?
Computer randomly turns off but i can turn it back on
While i am playing games my computer seems to suddenly turn off i can turn it back on with no problem but it randomly happens every 2 hours ish.
Activate Pro Version
Disable textinputhost.exe on Windows 10
This file is obviously spyware, and logs every key stroke one makes. I use to be able to disable it and did delete it using BoostSpeed13, but now it has locked itself, so i can no longer disable or delete it.
When i disable it, it shows in the task manager and the Services tab that it is still running even with it being disabled. If i close it using task manager, as soon as i hit a key on the keyboard, it reopens. There is one other program that is very similar to this and also opens and runs, clipmanager i think it is called. I can disable this, but it also comes back, not immediately but normally within the day.
How can i deleted these files or disable them perminently - they were never part of Windows 10 until very recently, so hence i beleiev e they are key logers and spyware.
Thanks in advance
Gav
ソフトを起動しようとすると保護がかかってしまいます。
「ユーザーアカウント制御
このアプリは保護のためブロックされました」
対処方法をご教示ください。
Bootspeed 13
kind regards chris moore
Second PC Monitor Not Recognized and Screen Resolution Fuzzy on Both
question about WIN10 servises
HDD
Откат не помог.
Что делать?