1897 questions
Not able to install an upgrade for Boostspeed 12.2.0.0
I am unable to install the upgrade for Boostspeed 12..2.0.0 to 12.2.0.1
After completion of the upgrade software, the Help box remains showing my Version as 12.2.0.0
After completion of the upgrade software, the Help box remains showing my Version as 12.2.0.0
проблема с регистрацией
Купил лицензию на ABSpeed 26-го июля 2021 года. Действительна ещё 181 день.
До недавнего времени проблем не возникало. Последние несколько дней слетает активация, каждый раз при открытии программы предлагает активировать ПРО версию, после ввода ключа выскакивает окно, говорящее, что программа активировани, версия ПРО, но в самой программе никаких изменений нет, кнопка "Активировать ПРО" не исчезает, и в "помощи" ропять то же самое. Что делать, как решить проблему?
До недавнего времени проблем не возникало. Последние несколько дней слетает активация, каждый раз при открытии программы предлагает активировать ПРО версию, после ввода ключа выскакивает окно, говорящее, что программа активировани, версия ПРО, но в самой программе никаких изменений нет, кнопка "Активировать ПРО" не исчезает, и в "помощи" ропять то же самое. Что делать, как решить проблему?
Drive C: - Reports Disk has errors
The subject report appears in the attached PDF file. APPARENTLY YOUR SYSTEM DOESN'T ACCEPT PDF FILES SO THE FOLLOWING INFORMATION WILL HAVE TO DO.
Despite the statement that the report provides details on disk error check AND REPAIR RESULTS, the report simply states that my C:Drive has errors.
There is no indication as to what the errors are or that they have been repaired; on the contrary the errors have not been identified nor have they apparently been repaired.
How do I find out what the errors are and how do I repair them?
Regards, Harry McBride
Despite the statement that the report provides details on disk error check AND REPAIR RESULTS, the report simply states that my C:Drive has errors.
There is no indication as to what the errors are or that they have been repaired; on the contrary the errors have not been identified nor have they apparently been repaired.
How do I find out what the errors are and how do I repair them?
Regards, Harry McBride
System Information Report
The System Information report for my external backup hard drive above shows the following;
ID: 05
Name: Reallocated sector count
Value: 134
Worst: 134
Threshold: 140
Raw Data: 522
Status: Prefail
What does this mean and how do I fix it?
ID: 05
Name: Reallocated sector count
Value: 134
Worst: 134
Threshold: 140
Raw Data: 522
Status: Prefail
What does this mean and how do I fix it?
Delete wrong user
After boot. Windows ask for user. To choise of two with same name en than pin code.
Want to delete wrong choise
Want to delete wrong choise
Unable to activate Auslogics Bootspeed 12 PRO Version
I have been having issues now for more than a week I keep getting the message the my PRO Version is not atctivated despite me doing it countless times. Please can you advise what to do.
Windows refusing access as administrator
Why has Windows started to refuse access to my newer version of Defrag? I have had to take it off my laptop and reinstall an older version to attain use of my perfectly safe and legitimate copy
Could not activated my license
I have bought the pro license at July 2021 and used this software until mid of january. Suddenly the software ask me again for license code, and after I input my code, the software still on free version mode and not changed to PRO version. Please assist me regarding this problem
Program not registered
As you can see in the attached show is registred, but the program says need to rgister for pro version. Please advise as I have renewed the license in december.
Thank you
Thank you
Activating Software Problem
I have now come to the end of my tether with this piece of software. I have been sent a Registration Code because the software I purchased on the 14 Dec 2021 keeps on asking me to Activate Pro Version. I removed the programme from my computer and started afresh. The programme dowloaded and the after putting in my Licence Key it advised me that the programme was registered. However, there is white writing on a green backgroumd in the bottom right hand corner stating: Activate Pro Version (when pressed advises what you get with the Pro version - which I have already purchased!) I have added this as an attachement on an MS Word doc.
Carl Bruce
Content hidden to protect privacy
BOOT SPEED PRO
I HAVE RENEWED MY BOOT SPEED SUBSCRIPTION BUT I CAN'T PERFORM CERTAIN FUNCTIONS I AM ASKED TO TAKE PRO VERSION WHILE I HAVE ALREADY PAID THE BASIC VERSION HOW TO UPGRADE TO THE PRO VERSION WITHOUTPAYING THE 50 EUROS MORE ?
LICENCE N°:
Content hidden to protect privacy
THANK YOU
Aktivation not Possibel
Hi
I did try to activate the pro version.
Reslult: The product has been activated
But in realatiy is the green botten still here and its not working as should when activated.
Regards
Kurt
I did try to activate the pro version.
Reslult: The product has been activated
But in realatiy is the green botten still here and its not working as should when activated.
Regards
Kurt
Auslogics 12 is blocked by Windows 10
Hi!
My Auslogics 12 is blocked by Windows 10. What can I do to fix this problem? And I cannot to set my Auslogics license key. I have just a basic version of programm now.
My Auslogics 12 is blocked by Windows 10. What can I do to fix this problem? And I cannot to set my Auslogics license key. I have just a basic version of programm now.
Программа была заблокирована администратором
Вероятно возникла проблема с цифровой подписью файла integrator.exe. Программа не может быть активирована лицензионным ключом.
About Auslogics BoostSpeed 12
Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします
Content hidden to protect privacy
Hirosuke Kajiyama
Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします
License key ライセンスキー：
Auslogics BoostSpeed 12
Content hidden to protect privacy
Pro version ?
Noticed my Boostspeed progaram has the activate pro version on the bottom of the screen when i have already registered it.
Plus the last time i used driver updater it updated my pc then restarted it and it would not boot up no matter what i tried, I then had to reinstall windows with a backup. not used driver updater since.
Thank You.
Plus the last time i used driver updater it updated my pc then restarted it and it would not boot up no matter what i tried, I then had to reinstall windows with a backup. not used driver updater since.
Thank You.
Admin. Blocked
When trying to open Boostspeed, I am getting a popup stating Admin Blocked, go to an Administrator Integrator.exe. How can I clear this. If I re-download the basic program will open, when I type in my registration code, I'm sent to the store pager in AOL. Any help with this problem would be appreaciated.
Thank You
James Elder
Thank You
James Elder
register Problem of the Auslogic boot speed pro12
Hello, I hope you are well.
I had aready register the code the i got the email after paid for it.
and when i check programe registertion its show this programe is registed. but I can not use it as the pro version.
it is still have the Activate pro Version button on the down right side.
Please help.....
I had aready register the code the i got the email after paid for it.
and when i check programe registertion its show this programe is registed. but I can not use it as the pro version.
it is still have the Activate pro Version button on the down right side.
Please help.....
Производительность ПК
Ваша программа периодически выдает сообщение о перегруженности процессора моего ПК и отсылает к "подробностям". А подробности - это сканер всех работающих и неработающих программ в компьюторе. Ваш сканер при этом никоим образом не оценивает важность запущенного процесса для работы компьютера. По сопровождающим характеристикам определить возможность отключения того или иного процесса очень трудно. Тогда какой смысл ваших обещаний "оптимизировать работу компьютера", если инструментов, реально выполняющих эту фунцкцию в части отключения второстепенных процессов, вы не предлагаете?
Laptop slow on startup
Hi there,
I have a new laptop with a high spec. However, for the first hour each day, it runs as slowly as an old 486 machine, then suddenly it catches up with itself and runs superbly all day.
I've checked everything:
Programs in the Start menu
ESET and OneDrive behaviour
Updates behaviour
BIOS settings
Everything I can think of and a hundred things I've learned about...
I've uninstalled some of the programs, but now I'm thinking I should uninstall everything and reinstall Windows 10.
Any ideas before I try the Windows 10 reinstall?
NOTES (1) I did try the upgrade to Windows 11 when I first got the machine, however, I didn't like it and went back to Windows 10; it was slow in the short time that I ran Windows 11 too, so I don't konw if that means something, like maybe it's a hardware issue? (2) It was a demo machine in the store where I bought it.
I have a new laptop with a high spec. However, for the first hour each day, it runs as slowly as an old 486 machine, then suddenly it catches up with itself and runs superbly all day.
I've checked everything:
Programs in the Start menu
ESET and OneDrive behaviour
Updates behaviour
BIOS settings
Everything I can think of and a hundred things I've learned about...
I've uninstalled some of the programs, but now I'm thinking I should uninstall everything and reinstall Windows 10.
Any ideas before I try the Windows 10 reinstall?
NOTES (1) I did try the upgrade to Windows 11 when I first got the machine, however, I didn't like it and went back to Windows 10; it was slow in the short time that I ran Windows 11 too, so I don't konw if that means something, like maybe it's a hardware issue? (2) It was a demo machine in the store where I bought it.
pop up for ugrade when I already subscribe to boost 12
I upgraded to Boost12 quicte some time ago and yet I keep getting an annoying popup on my screen to upgrade. I need this to stop and this should not count as one of my questions because it is purely an issue on your end.
No Windows Update KB5008212
From a couple of months now, I am unable to install Windows Update "Windows 10 Version 21H1 for x64 Systems (KB5008212)". Windows Update is urging me to do so, but all I get is error (0x800f0831). I've tested all kind of solutions from Microsoft and other sources, and tried al least a dozen times, with no success. Some sources insists in the fact you need previous updates installed before this oner, and Bootspeed 12 clears update files as a part of Windows Slimmer tool. Is the first time I experience a problem like this and, even not critical, is worrying me because I can get a solution. Best regards.
Restricted volume on a new hard drive
I installed a 3 TB hard dive on my desktop. I can only use 2TB with Wndows 10. How can use all of the new hard drive?
Notifacations
Can we stop the nag notifacations?
I do not need constant reminders that I have 3 questions, now 2. Stop it.
I do not need constant reminders that I have 3 questions, now 2. Stop it.
How to prevent the software from deleting cookies of Bank and Credit cards
I have Banks and Credit Cards that I use regularly. I don't want to have problems of logon to them every time I use the Bootspeed to scan the system. The Bank that I hvae problems after the Bootspeed scan system Is Bank of American.com, Chase Bank logon. Visa logon, American Express .com Credit Card logon. Please help me to resolve these problem. Thank you,
Content hidden to protect privacy
no responcive pc
after a couple of min from when i boot the pc up and it loads into window 10 the system. become un responsive and take for ever to open anything. there is no virus or malware that i can see or detected.
new computer
I have a new computer that is online now, the old slimline is gone. How do I move my current contract to cover my new computer.The order number is 3740428-4830463. Thank you
Outlook not closing correctly
I have MS 365.
Brand new machine hi end
When I close Outlook it does close OK
But when I reopen in morning I always get message it did not close correctly "Something stopped it form closing" Do I want to restore to previuos". I click yes and it opens
Any ideas. It was reinstalled
Thanx
Brand new machine hi end
When I close Outlook it does close OK
But when I reopen in morning I always get message it did not close correctly "Something stopped it form closing" Do I want to restore to previuos". I click yes and it opens
Any ideas. It was reinstalled
Thanx
SSD optimization for a whole day
Hello
I am using SSD optimization with Auslogic Bootspeed 12 to optimize my C drive (114 GB free 54 gb) it took a whole day to finish. Is it normal for a ssd optimization running? (while it only took 5 mins to optimize my D drive 98GB free 54GB). How frequently should I run SSD optimization
I am using SSD optimization with Auslogic Bootspeed 12 to optimize my C drive (114 GB free 54 gb) it took a whole day to finish. Is it normal for a ssd optimization running? (while it only took 5 mins to optimize my D drive 98GB free 54GB). How frequently should I run SSD optimization
ファンクションが間違っています
Auslogics BoostSpeed 11 でクリーンアップ後（使っていないファイル／ホルダーを削除？）、PC立ち上げ時に以下のメッセージが出ます。
無視して進めれば、通常の動作をしているように見えます（今のところトラブルは起こりません）が、何が起こっているのでしょうか？
どうすれば、このメッセージを消すことが出来るのでしょうか？
C:\Program Files\WindowsApps\Microsoft.549981C3F5F10_3.2202.10603.0_x64_...\Win32Bridge.Server.exe
ファンクションが間違っています。
ちなみに、C:\Program Files\WindowsApps を開こうとすると、
「このフォルダーへアクセスするアクセス許可が拒否されています。」というメッセージが出ます。
無視して進めれば、通常の動作をしているように見えます（今のところトラブルは起こりません）が、何が起こっているのでしょうか？
どうすれば、このメッセージを消すことが出来るのでしょうか？
C:\Program Files\WindowsApps\Microsoft.549981C3F5F10_3.2202.10603.0_x64_...\Win32Bridge.Server.exe
ファンクションが間違っています。
ちなみに、C:\Program Files\WindowsApps を開こうとすると、
「このフォルダーへアクセスするアクセス許可が拒否されています。」というメッセージが出ます。
Uninstall
How do I uninstall your program(s) from my Windows 10 PC?
It's not in/on my programs list to uninstall.
Thank you
Ronald Cloud
It's not in/on my programs list to uninstall.
Thank you
Ronald Cloud
High CPU Usage
My CPU usage shows almost 100% for sometime when I start my system or even sometime while working too. It remains at 100% for almost 15 - 20 min or more even when application is open. I tried all options in Auslogics to resolve it out but nothing is working.
Please suggest for any further option which can help out.
Please suggest for any further option which can help out.
boot speed
Dear Sir,
I had purchased your software to solve issues like slow booting , taking more time in opening software etc
Till today after running all programs from your software , I find no improvement in boot speed etc.
Please let know how to solve the problems
regards
t k venkatesh
I had purchased your software to solve issues like slow booting , taking more time in opening software etc
Till today after running all programs from your software , I find no improvement in boot speed etc.
Please let know how to solve the problems
regards
t k venkatesh
Not able to install an upgrade for Boostspeed 12.2.0.0
I am unable to install the upgrade for Boostspeed 12..2.0.0 to 12.2.0.1
After completion of the upgrade software, the Help box remains showing my Version as 12.2.0.0
After completion of the upgrade software, the Help box remains showing my Version as 12.2.0.0
I registered my account to windows insider but when I click get started in my computer's settings, it tell me that "we can't talk to our service at this moment please try again later", I tried this again and again but it does the same.
I registered my account to windows insider but when I click get started in my computer's settings, it tell me that "we can't talk to our service at this moment please try again later", I tried this again and again but it does the same. I tried a lot of fixese but they all don't work.
New in blog
See allRecommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7