1859 questions
msedge.exe
Wenn ich nach einem Systemscan durch Auslogics den Button für die möglichen Reparaturen drücke, erscheint die Aufforderung, bestimmte Apps erst abschalten zu lassen. Dafür wird fünfmal msedge.exe aufgezählt. Drücke ich den Button, der diese Anwendung(en) schließen soll, folgt die Mitteilung, das sei nicht möglich, ich solle es manuell machen. Alternativ kann ich anklicken, die Sache zu ignorieren.
Frage 1: Wenn ich es ignorieren kann (und gleich fünf mal), wofür ist es wichtig?
Frage 2: Wie schaltet man msedge.exe manuell ab?
Frage 1: Wenn ich es ignorieren kann (und gleich fünf mal), wofür ist es wichtig?
Frage 2: Wie schaltet man msedge.exe manuell ab?
Auslogic Defrag Issue
Defrag hung up on file C:\$Extend\$UsnJml:$J
Went from 3.8% to 13.30% completed and took over 22 hours as you can see in the screenshot attachment.
How can I get defrag around this issue so it can complete the optimization?
Thank you
Dennis Miller
Content hidden to protect privacy
P.S. Why isn't Auslogics a subcategory option?
Laptop slow on startup
Hi there,
I have a new laptop with a high spec. However, for the first hour each day, it runs as slowly as an old 486 machine, then suddenly it catches up with itself and runs superbly all day.
I've checked everything:
Programs in the Start menu
ESET and OneDrive behaviour
Updates behaviour
BIOS settings
Everything I can think of and a hundred things I've learned about...
I've uninstalled some of the programs, but now I'm thinking I should uninstall everything and reinstall Windows 10.
Any ideas before I try the Windows 10 reinstall?
NOTES (1) I did try the upgrade to Windows 11 when I first got the machine, however, I didn't like it and went back to Windows 10; it was slow in the short time that I ran Windows 11 too, so I don't konw if that means something, like maybe it's a hardware issue? (2) It was a demo machine in the store where I bought it.
I have a new laptop with a high spec. However, for the first hour each day, it runs as slowly as an old 486 machine, then suddenly it catches up with itself and runs superbly all day.
I've checked everything:
Programs in the Start menu
ESET and OneDrive behaviour
Updates behaviour
BIOS settings
Everything I can think of and a hundred things I've learned about...
I've uninstalled some of the programs, but now I'm thinking I should uninstall everything and reinstall Windows 10.
Any ideas before I try the Windows 10 reinstall?
NOTES (1) I did try the upgrade to Windows 11 when I first got the machine, however, I didn't like it and went back to Windows 10; it was slow in the short time that I ran Windows 11 too, so I don't konw if that means something, like maybe it's a hardware issue? (2) It was a demo machine in the store where I bought it.
Auslogics BoostSpeed 12について
「Auslogics BoostSpeed Pro12」「Auslogics Driver Updater」と「Disk Defrag Ultimate」のボタンがありますが、インストールすると別途、料金が発生するのでしょうか？
ignoring cache and thumbnails
Hi guys,
I want BS 12 to ignore clearing/deleting image thumbnails and chrome cahe.
How do I do that?
Please let me know
Regards
Luis
I want BS 12 to ignore clearing/deleting image thumbnails and chrome cahe.
How do I do that?
Please let me know
Regards
Luis
freeing Memory usage
Hi Guys,
I have noticed some apps reserves too much memory for itselfs like Google Chrome,
is it possible to get Auslogic Bootspeed 12 to free some of the memory on a regular basis, for example when it reaches 85% of usage?
also it would be nice to improve memory and CPU by disabbling things that are not required when we want to get out more performance from our PC,
The BS12 RAM and CPU optimization seems to be going into that direction, but require a little bit of more control over processes?
I have noticed some apps reserves too much memory for itselfs like Google Chrome,
is it possible to get Auslogic Bootspeed 12 to free some of the memory on a regular basis, for example when it reaches 85% of usage?
also it would be nice to improve memory and CPU by disabbling things that are not required when we want to get out more performance from our PC,
The BS12 RAM and CPU optimization seems to be going into that direction, but require a little bit of more control over processes?
Windows search indexer
Hi there,
Windows search indexer seems to be taking forever to finish.
I have restarted the process, limited the number of files to index and even disable the AV to allow indexer to index faster.
But after a while it comes back and keeps eating away between 60% to 24% of CPU
Any fix for that? runing on (win11 64 bits.
Windows search indexer seems to be taking forever to finish.
I have restarted the process, limited the number of files to index and even disable the AV to allow indexer to index faster.
But after a while it comes back and keeps eating away between 60% to 24% of CPU
Any fix for that? runing on (win11 64 bits.
Right Click opens very slowly
Right click on file explorer options (such as copy) takes forever to load. Right click on any file takes forwver to load options.
Tried to purchase Boostspeed Pro but website would not advance to chaeckout?
Tried to purchase Boostspeed Pro but website would not advance to chaeckout?
I am unable to switch to keyboard Chinese Input Method after using Auslogics BootstSpeed
After using the Auslogics BootstSpeed and the function of cleaning the Registry files, I found that I am not able to switch back to Chinese input method anymore and I can only type in English. I tried to type the hotkey "Left Ctrl +Shift", nothing happened. I tried "Ctrl + Space" or "Win + Space", also nothing happended. The small icon at shows "EN" at the bottom right corner was disappeared (see attached).
I tried to find the file "ctfmon.exe" and excute, but it doesn't work. I tried to add this command at the startup, it also doesn't work.
I tried to delete the language pack and reinstall, it also doesn't work.
The only moment that I can see the langauge menu comes out again is that when I was in the situation of "User Account Control" when the computer requires administrator status to run some program (see attached).
I am pretty desperate and really need your help. Thank you!
I tried to find the file "ctfmon.exe" and excute, but it doesn't work. I tried to add this command at the startup, it also doesn't work.
I tried to delete the language pack and reinstall, it also doesn't work.
The only moment that I can see the langauge menu comes out again is that when I was in the situation of "User Account Control" when the computer requires administrator status to run some program (see attached).
I am pretty desperate and really need your help. Thank you!
internet hızlandırma yaptıgımda hızım düşüyor
internet hızlandırma yaptıgımda hızım düşüyor 50 mbits fiber internetim var manuel ayarları bilmiyorum yardımcı olurmusunuz acaba?
boite mail
Bonjour j aurais besoin que vous m aidiez , je peux ouvrir ma boite mail depusi plusieurs jours la page était a a s'ouvrir donc je me deconnectais je remettais mon identifiants et mot de passe mais ce matin pu rien l ordi ne me donne pu la page poiur mettre ces infos martine_viellet@sfr.fr
Auslogics Boostspeed 12
My computer is a 64 bit machine which can run 32 bit programs. My computer is running Boostspeed 12 using 32 bit versions of all its programs instead of the 64 bit version. Is this the reason why my computer is taking over an hour to startup in the morning with the disk using 93% to the usual 100% all the time? Or, is the problem due to too much disk thrashing since it appears that all the startup programs start up immediately instead of being staggered per the scheduler? This problem started when I had to uninstall Boostspeed 12 and reinstall it per the Auslogics support person.
Gah. Cannot access Report
I have not been able to view any of the reports in the Auslogics software. I just get a blank window in Foxfire.
Auslogics BoostSpeed software itself
I have BoostSpeed perform Dashboard, Disk Defrag, Protect. Internet Optimizer and other checks by schedule. All is good.
However, directory "c:\ProgramData\Auslogics\BoostSpeed\12.x\Reports" becomes cluttered with .html, .xml and other reports produced by these various check tools.
How can I set BoostSpeed to automatically clean up after itself by deleting ancient reports over some arbitrary age? There's about a Gig of files in this directory on this machine and some 3Gb on another.
However, directory "c:\ProgramData\Auslogics\BoostSpeed\12.x\Reports" becomes cluttered with .html, .xml and other reports produced by these various check tools.
How can I set BoostSpeed to automatically clean up after itself by deleting ancient reports over some arbitrary age? There's about a Gig of files in this directory on this machine and some 3Gb on another.
random shut down of my laptop
recently my sony vaio laptop strted shutting of randomly. can you help.
Computer freezes for 5 - 6 seconds every 2 - 3 minutes, maybe less.
Hi there,
In a nutshell - my desktop freezes for about 5 - 8 seconds and it seems to occur every 2 - 3 minutes. ....It just locked as I'm writting this.
I run your Auslogics BoostSpeed, am computer literate for the most part and just not sure what to do. My specs are:
Device name DESKTOP-D49TFE8
Processor Intel(R) Core(TM) i3-8100 CPU @ 3.60GHz 3.60 GHz
Installed RAM 8.00 GB (7.88 GB usable)
Device ID 6A682698-5FFB-4679-9302-CD1FB7F46F2A
Product ID 00325-81079-36435-AAOEM
System type 64-bit operating system, x64-based processor
Pen and touch No pen or touch input is available for this display
Edition Windows 10 Home
Version 21H1
Installed on 11/27/2020
OS build 19043.1348
Experience Windows Feature Experience Pack 120.2212.3920.0
Thank you very much,
Lance Losey
In a nutshell - my desktop freezes for about 5 - 8 seconds and it seems to occur every 2 - 3 minutes. ....It just locked as I'm writting this.
I run your Auslogics BoostSpeed, am computer literate for the most part and just not sure what to do. My specs are:
Device name DESKTOP-D49TFE8
Processor Intel(R) Core(TM) i3-8100 CPU @ 3.60GHz 3.60 GHz
Installed RAM 8.00 GB (7.88 GB usable)
Device ID 6A682698-5FFB-4679-9302-CD1FB7F46F2A
Product ID 00325-81079-36435-AAOEM
System type 64-bit operating system, x64-based processor
Pen and touch No pen or touch input is available for this display
Edition Windows 10 Home
Version 21H1
Installed on 11/27/2020
OS build 19043.1348
Experience Windows Feature Experience Pack 120.2212.3920.0
Thank you very much,
Lance Losey
PROバージョンを有効にするについて
常に” PROバージョンを有効にする ”が表示され、 PROバージョンでは無いようです、入るにはどうしますか？
ライセンスコードは購入しています、コードを入力すると、畝に " GING ”のHPに入ります、なにかインプットが入りますか？
Auslogics BootSpeed 12 でアイコンからソフトに入ろうとすれうと、” このアプリは保護のためブロックされました ”と表示され入れません。
ブロックを除去する方法を教えて下さい
ライセンスコードは購入しています、コードを入力すると、畝に " GING ”のHPに入ります、なにかインプットが入りますか？
Auslogics BootSpeed 12 でアイコンからソフトに入ろうとすれうと、” このアプリは保護のためブロックされました ”と表示され入れません。
ブロックを除去する方法を教えて下さい
optimize put topaz studio into reccle bin
recycle bin is getting ful ans auslogics wants to empty it. How to I get topas=z back
Активация PRO
почему при вводе ключа регистрации программа не активируется до версии PRO, хотя на сайте пишет, что ключ верный и программа зарегестрирована и так на всех устройствах
Проблемы с fps в играх
Здравствуйте, недавно начались проблемы с игровым ноутбуком, а именно низкие fps в играх, для сравнения, буквально месяц назад в игре counter strike global offencive было больше 200 fps, на данный момент выше 60 не поднимается ( проблема не в самой игре, в других тоже самое даже на низких настройках ) Ноутбуку год. Пересмотрев множество видео с вариантами решения проблемы, все равно не повышается качество игры. Уже и очистку, и сканирование делала с помощью вашей программы, все равно не выходит. Пытаюсь также драйвера обновить. Подскажите, пожалуйста, что нужно сделать.
Windows Event Viewer and Auslogics BoostSpeed 12
I am having ongoing issues with my MSI GL65 Leopard suddenly "freezing" (GUI becomes totally unresponsive) while I am streaming, using cloud drives (One Drive, SharePoint, etc) or have multiple applications running in Windows (Outlook, Teams, Microsoft Word, etc). I am forced to to hit the power button and reboot -- often losing my work in the progress.
It is not a hardware issue as I have 32G Ram with an Intel i7. I check the Windows Event Viewer and persistently see issues with the "Cloud Files Diagnostic Event Listener", and the application-specific permission settings in COM Server Application.
Is there a way (or a tool in Auslogics) to use the info I find in the WIndows Viewer to address these or any other issues? Is there a Windows Event Viewer diagnostic tool I am unaware of? Am I barking up the wrong tree in using Windows Event Viewer and the real issue is elsewhere and there's a better way to identify the issue?
I am only associating the freezes with these issues because they usually occur right before Critical Error freeze occurs.
Help! And thanks.
It is not a hardware issue as I have 32G Ram with an Intel i7. I check the Windows Event Viewer and persistently see issues with the "Cloud Files Diagnostic Event Listener", and the application-specific permission settings in COM Server Application.
Is there a way (or a tool in Auslogics) to use the info I find in the WIndows Viewer to address these or any other issues? Is there a Windows Event Viewer diagnostic tool I am unaware of? Am I barking up the wrong tree in using Windows Event Viewer and the real issue is elsewhere and there's a better way to identify the issue?
I am only associating the freezes with these issues because they usually occur right before Critical Error freeze occurs.
Help! And thanks.
key not working.
The following two keys of my Dell Inspiron laptop is not workin ;
1) 'Delete' key
2) 'Down arrow' key.
My laptop's system drive is 'C', one of the system folder in drive 'C' is occupying too much of space. I am pretty sure that there are plenty of unnecessary data and file. How can I find which one to keep and which one to delete, pls advice.
1) 'Delete' key
2) 'Down arrow' key.
My laptop's system drive is 'C', one of the system folder in drive 'C' is occupying too much of space. I am pretty sure that there are plenty of unnecessary data and file. How can I find which one to keep and which one to delete, pls advice.
pictures
After installing BOOTSPEED 12 and doinG a full scan THE PICTURES IN MY PICTURE FOLDER VANISHED FROM MYCOMPUTER
any idea were can I find them
Local disk (c)>users>cocon>Pictures (folders are empty)
any idea were can I find them
Local disk (c)>users>cocon>Pictures (folders are empty)
Ads
I have ads turned OFF in General settings, however an ad pops up everytime after a defrag is completed wanting me to purchase Boostspeed 12. An ad also pops up when I open the program. How do I get rid of these ads since I have purchased this pro version?
They are very annoying and they cover up my scan results after defrag is completed.
Note: I have also turned off all tray notifications in General Settings and I am still getting these pop ups. Please fix.
Thank you
They are very annoying and they cover up my scan results after defrag is completed.
Note: I have also turned off all tray notifications in General Settings and I am still getting these pop ups. Please fix.
Thank you
unidentified files following upgrade to Win 10 version 2004 prevent defragmentation
I have recently upgraded my Win10 x64 PC to version 2004 from Windows update. Prior to the upgrade the PC was clean and fast and the system drive was defragmented using Auslogics Defrag Ultimate. Fopllowing the upfgrade and subsequent cleanup, I ran defrag again and the drive now has approximately 20% of its used capacity filled with files that Auslogics Defrag will not identify (light green block icons, mouse click for file info invokes the prompt "This block contains file system service data. Detailed view is not available".
This is obviously some several GB of data judging by the number of blocks occupied in this manner - but I am unablæe to find out what these files are, what they are called, what purpose they serve or where they are on the drive. They are spread out across the system drive and thus prevent defrag running a free space defragmentation, and thus casue even more fragmentation when new files are added to the drive.
I have tried tio google this problem but have not found any reference to it. Auslogics defrag is the only untility that tells me these file exist - but no more than that.
Can you advice - what are these files, and how do I get rif them and run the usually perfect free space defrag?
thanks / Adrian
This is obviously some several GB of data judging by the number of blocks occupied in this manner - but I am unablæe to find out what these files are, what they are called, what purpose they serve or where they are on the drive. They are spread out across the system drive and thus prevent defrag running a free space defragmentation, and thus casue even more fragmentation when new files are added to the drive.
I have tried tio google this problem but have not found any reference to it. Auslogics defrag is the only untility that tells me these file exist - but no more than that.
Can you advice - what are these files, and how do I get rif them and run the usually perfect free space defrag?
thanks / Adrian
Cannot connect Wifi.无法连接无线网
Hello, I used Auslogics BoostSpeed 13 to clean up the data. After cleaning, my DELL notebook (DELL 5520) could not connect to the wireless network. I could not connect to the network by using the external network card or the external network cable. How should I solve it? Looking forward to your reply, you can also reply me at 1574426325@qq.com
您好，我用Auslogics BoostSpeed 13进行了数据清理，清理之后，我的戴尔笔记本(DELL 5520)无法连接无线网，使用外置网卡、外接网线都无法连接网络。请问应该如何解决？期待您的回复，您也可以回复我的邮箱：
Content hidden to protect privacy
Процесс System грузит процессор.
Добрый день, хотел бы задать такой вопрос, процесс System очень сильно грузит процессор призапуске определённого приложения, загрузка порядка 33%-35%. Но если это приложение отключено и запущены какие то други программы, то всё в порядке, System процессор не загружает, подскажите можно ли это как то решить?
Fn клавиша на ноутбуке
Здравствуйте! Перестала работать клавиша FN + F1, F2 ... и т.д. Не могу в играх убавить звук, яркость. Полагаю перестал работать драйвер отвечающий за эту функцию. Пожалуйста, помогите советом как устранить данную проблему. С уважением, Станислав Викторович.
computer desktop icon not working properly
after changing the icon of the desktop basket, the view of the basket stopped changing. How to fix ... The icon was downloaded from the Internet and I like it (I don't want to delete it)!
problems with google and passwords
since I'm install Aulogics and run the program it keeps deleting my programs password and when I try to oprn (IN GOOGLE) facebook I'm getting unresponsive pages....but if I open facebook with EDGE I have no problems.....can you help?
allen iglicki
allen iglicki
Cannot open Auslogics 12 on my other laptop
Hi, this may have come through twice, sorry if it has, but I have 3 laptops which I pay to use your excellent software. My other laptop, a Lenovo T520 is showing an error message from MS ...the adminsitrator has blocked me from running the auslogics app. It then says contact the adminsitrator...I am the adminsitrator ..the only user of that machine. Does MS have a problem with Auslogics? Can you help me sort this problem out and enable me to open your software as and wehen I need to...weekly? VMT Chris
Disk Partitioning Error
2 years ago, I was messing around with dual-booting and windows partitioning. So much so that an error occured. After I wasn't able to boot back into Windows 10 and deleted ALL my files, I noticed that my maximum capacity was lowered from 256gb to 237gb. It was probably from the dual-booting error. (Was trying to dual-boot an android os or a linux os or smth). I'm running out of storage because I'm too lazy to delete files and I need that 19gb. Respond ASAP, Thanks!
Recommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7