1859 questions
Диск содержит ошибки
При сканировании Disk Doktor пишет что диск C содержит ошибки но при исправлении и глубоком исправлении все равно пишет диск содержит ошибки. Другие программы Auslogics пишут что все диски впорядке. Это ошибка программы или что ?
reparer windows 10
MON WINDOWS 10 NE FONCTIONNE PAS BIEN PAR DE BARRE DES TACHES NI L EXPLORATEUR DE WINDOWS
mot de passe bios perdu
j'ai un pc hp compaq 6730s sous N°=CNU9020NKN
mon mot de passe par defaut (e9lo1719s9) n'a pas d'effet
j'ai change la pile bios rien
j'ai utilise hiren's bootcd rien
Aider mois s.v.p et merci d'avance................
How do I stop starting up when I start the computer
When I start up my computer, PCTuneUp starts up. How do I prevent this from happening.
Problema con Auslogics Driver Updater
Buenos dias, tengo un problema con la aplicacion Auslogics Driver Update, ya solicite anteriormente me solucionen este problema, inclusive me solicitaron que reinstale el aplicativo, pero no se soluiciona este proble, por favor tengo que actualizar algunos drivers, pero se queda la PC congelada cuando va hacr la actualizacion de dichos driver, para constancia les envio fotos del problema.
once power button pressed to start up...
...my PC makes three long, low tones followed by four shorter, higher tones. Plus it is very slow to start.
Any help gratefully received
Thank you
Tom
Any help gratefully received
Thank you
Tom
TaskManager.exe
I received a high-use resource message that one program was using a significant amount of memory resources, and it was identified as TaskManager.exe. Should I and is there a way to shut this down?
Interfearing with VPN
Hi,
Whenever my VPN connects to the internet, the Auslogics Bootspeed notifies, an attempt to change the DNS was diplayed. Well if I connect via VPN it will change the DNS. My question is does your softwere blocks the attempted change of DNS or it's only a notification. If it blocks then how do I dissable it as I want my VPN more than your software.
Thank you,
Winston
Whenever my VPN connects to the internet, the Auslogics Bootspeed notifies, an attempt to change the DNS was diplayed. Well if I connect via VPN it will change the DNS. My question is does your softwere blocks the attempted change of DNS or it's only a notification. If it blocks then how do I dissable it as I want my VPN more than your software.
Thank you,
Winston
I have windows installed on my SSD and HDD so how do I transfer data from one installation to the other without cloning
So I got and installation of windows on my SSD and HDD, but now I want to shift my files from HDD to SSD installation and then delete windows from HDD, but I don't want to clone(unless it doesn't clone windows installation and other files that I already installed on the SSD) my current installation(HDD) as it was pirated while the other one is legal, and by data I mean everything from text files to programs I installed, so I just want the user data and programs I installed to be shifted to my SSD without deleting windows from SSD and cloning the HDD one. Pls Help as quickly as possible,
Windows Defender Disable Remove
I WOULD YOUR HELP REGARDING REMOVE WINDOWS DEFENDER BECAUSE MY LAPTOP GOES VERY SLOW WHEN IS ON
THANK YOU
SAKLIS DIMITRIS
THANK YOU
SAKLIS DIMITRIS
Boot Speed, or Restart Speed
The main reason I bought this program was to help increase my boot speed. it's 4 minutes and 15 seconds. After running the Pro version of the program the boot speed is still the same. I deselected a bunch of items in the startup screen and it's still the same. I don't understand why it takes so long. Please help.I'm not sure if this is a windows question or a software question. thanks. Paul
Disk Defrag pro not showing new drive
I have just installed a new external hard drive (G) and the drive is not displayed in the list of disks in Auslogics Disk defrag 10. Could you please advise me how to correct the issue.
Sorry but I did not know which sub category was appropriate
AusLogic # BoostSpeed users
Where does display state the maximum number of user available with the product key assigned; and where does it show how many have been assigned; and where do they give the user name of the assigned
Постоянно отключается Wi-Fi
Постоянно отключается Wi-Fi на моём десктопе. Что необходимо сделать в настройках компьютера, чтобы wi-fi не отключался самостоятельно?
Startup Applications Automatically Getting Disabled
Startup Applications Automatically Getting Disabled. They are enabled in the startup in Task Manager and then disabled when I restart the computer. How can I fix this?
PROバージョンを有効にするについて
常に” PROバージョンを有効にする ”が表示され、 PROバージョンでは無いようです、入るにはどうしますか？
ライセンスコードは購入しています、コードを入力すると、畝に " GING ”のHPに入ります、なにかインプットが入りますか？
Auslogics BootSpeed 12 でアイコンからソフトに入ろうとすれうと、” このアプリは保護のためブロックされました ”と表示され入れません。
ブロックを除去する方法を教えて下さい
ライセンスコードは購入しています、コードを入力すると、畝に " GING ”のHPに入ります、なにかインプットが入りますか？
Auslogics BootSpeed 12 でアイコンからソフトに入ろうとすれうと、” このアプリは保護のためブロックされました ”と表示され入れません。
ブロックを除去する方法を教えて下さい
Активация PRO
почему при вводе ключа регистрации программа не активируется до версии PRO, хотя на сайте пишет, что ключ верный и программа зарегестрирована и так на всех устройствах
optimize put topaz studio into reccle bin
recycle bin is getting ful ans auslogics wants to empty it. How to I get topas=z back
Проблемы с fps в играх
Здравствуйте, недавно начались проблемы с игровым ноутбуком, а именно низкие fps в играх, для сравнения, буквально месяц назад в игре counter strike global offencive было больше 200 fps, на данный момент выше 60 не поднимается ( проблема не в самой игре, в других тоже самое даже на низких настройках ) Ноутбуку год. Пересмотрев множество видео с вариантами решения проблемы, все равно не повышается качество игры. Уже и очистку, и сканирование делала с помощью вашей программы, все равно не выходит. Пытаюсь также драйвера обновить. Подскажите, пожалуйста, что нужно сделать.
Windows Event Viewer and Auslogics BoostSpeed 12
I am having ongoing issues with my MSI GL65 Leopard suddenly "freezing" (GUI becomes totally unresponsive) while I am streaming, using cloud drives (One Drive, SharePoint, etc) or have multiple applications running in Windows (Outlook, Teams, Microsoft Word, etc). I am forced to to hit the power button and reboot -- often losing my work in the progress.
It is not a hardware issue as I have 32G Ram with an Intel i7. I check the Windows Event Viewer and persistently see issues with the "Cloud Files Diagnostic Event Listener", and the application-specific permission settings in COM Server Application.
Is there a way (or a tool in Auslogics) to use the info I find in the WIndows Viewer to address these or any other issues? Is there a Windows Event Viewer diagnostic tool I am unaware of? Am I barking up the wrong tree in using Windows Event Viewer and the real issue is elsewhere and there's a better way to identify the issue?
I am only associating the freezes with these issues because they usually occur right before Critical Error freeze occurs.
Help! And thanks.
It is not a hardware issue as I have 32G Ram with an Intel i7. I check the Windows Event Viewer and persistently see issues with the "Cloud Files Diagnostic Event Listener", and the application-specific permission settings in COM Server Application.
Is there a way (or a tool in Auslogics) to use the info I find in the WIndows Viewer to address these or any other issues? Is there a Windows Event Viewer diagnostic tool I am unaware of? Am I barking up the wrong tree in using Windows Event Viewer and the real issue is elsewhere and there's a better way to identify the issue?
I am only associating the freezes with these issues because they usually occur right before Critical Error freeze occurs.
Help! And thanks.
key not working.
The following two keys of my Dell Inspiron laptop is not workin ;
1) 'Delete' key
2) 'Down arrow' key.
My laptop's system drive is 'C', one of the system folder in drive 'C' is occupying too much of space. I am pretty sure that there are plenty of unnecessary data and file. How can I find which one to keep and which one to delete, pls advice.
1) 'Delete' key
2) 'Down arrow' key.
My laptop's system drive is 'C', one of the system folder in drive 'C' is occupying too much of space. I am pretty sure that there are plenty of unnecessary data and file. How can I find which one to keep and which one to delete, pls advice.
pictures
After installing BOOTSPEED 12 and doinG a full scan THE PICTURES IN MY PICTURE FOLDER VANISHED FROM MYCOMPUTER
any idea were can I find them
Local disk (c)>users>cocon>Pictures (folders are empty)
any idea were can I find them
Local disk (c)>users>cocon>Pictures (folders are empty)
Ads
I have ads turned OFF in General settings, however an ad pops up everytime after a defrag is completed wanting me to purchase Boostspeed 12. An ad also pops up when I open the program. How do I get rid of these ads since I have purchased this pro version?
They are very annoying and they cover up my scan results after defrag is completed.
Note: I have also turned off all tray notifications in General Settings and I am still getting these pop ups. Please fix.
Thank you
They are very annoying and they cover up my scan results after defrag is completed.
Note: I have also turned off all tray notifications in General Settings and I am still getting these pop ups. Please fix.
Thank you
unidentified files following upgrade to Win 10 version 2004 prevent defragmentation
I have recently upgraded my Win10 x64 PC to version 2004 from Windows update. Prior to the upgrade the PC was clean and fast and the system drive was defragmented using Auslogics Defrag Ultimate. Fopllowing the upfgrade and subsequent cleanup, I ran defrag again and the drive now has approximately 20% of its used capacity filled with files that Auslogics Defrag will not identify (light green block icons, mouse click for file info invokes the prompt "This block contains file system service data. Detailed view is not available".
This is obviously some several GB of data judging by the number of blocks occupied in this manner - but I am unablæe to find out what these files are, what they are called, what purpose they serve or where they are on the drive. They are spread out across the system drive and thus prevent defrag running a free space defragmentation, and thus casue even more fragmentation when new files are added to the drive.
I have tried tio google this problem but have not found any reference to it. Auslogics defrag is the only untility that tells me these file exist - but no more than that.
Can you advice - what are these files, and how do I get rif them and run the usually perfect free space defrag?
thanks / Adrian
This is obviously some several GB of data judging by the number of blocks occupied in this manner - but I am unablæe to find out what these files are, what they are called, what purpose they serve or where they are on the drive. They are spread out across the system drive and thus prevent defrag running a free space defragmentation, and thus casue even more fragmentation when new files are added to the drive.
I have tried tio google this problem but have not found any reference to it. Auslogics defrag is the only untility that tells me these file exist - but no more than that.
Can you advice - what are these files, and how do I get rif them and run the usually perfect free space defrag?
thanks / Adrian
Cannot connect Wifi.无法连接无线网
Hello, I used Auslogics BoostSpeed 13 to clean up the data. After cleaning, my DELL notebook (DELL 5520) could not connect to the wireless network. I could not connect to the network by using the external network card or the external network cable. How should I solve it? Looking forward to your reply, you can also reply me at 1574426325@qq.com
您好，我用Auslogics BoostSpeed 13进行了数据清理，清理之后，我的戴尔笔记本(DELL 5520)无法连接无线网，使用外置网卡、外接网线都无法连接网络。请问应该如何解决？期待您的回复，您也可以回复我的邮箱：
Content hidden to protect privacy
Процесс System грузит процессор.
Добрый день, хотел бы задать такой вопрос, процесс System очень сильно грузит процессор призапуске определённого приложения, загрузка порядка 33%-35%. Но если это приложение отключено и запущены какие то други программы, то всё в порядке, System процессор не загружает, подскажите можно ли это как то решить?
problems with google and passwords
since I'm install Aulogics and run the program it keeps deleting my programs password and when I try to oprn (IN GOOGLE) facebook I'm getting unresponsive pages....but if I open facebook with EDGE I have no problems.....can you help?
allen iglicki
allen iglicki
Fn клавиша на ноутбуке
Здравствуйте! Перестала работать клавиша FN + F1, F2 ... и т.д. Не могу в играх убавить звук, яркость. Полагаю перестал работать драйвер отвечающий за эту функцию. Пожалуйста, помогите советом как устранить данную проблему. С уважением, Станислав Викторович.
Cannot open Auslogics 12 on my other laptop
Hi, this may have come through twice, sorry if it has, but I have 3 laptops which I pay to use your excellent software. My other laptop, a Lenovo T520 is showing an error message from MS ...the adminsitrator has blocked me from running the auslogics app. It then says contact the adminsitrator...I am the adminsitrator ..the only user of that machine. Does MS have a problem with Auslogics? Can you help me sort this problem out and enable me to open your software as and wehen I need to...weekly? VMT Chris
computer desktop icon not working properly
after changing the icon of the desktop basket, the view of the basket stopped changing. How to fix ... The icon was downloaded from the Internet and I like it (I don't want to delete it)!
Disk Partitioning Error
2 years ago, I was messing around with dual-booting and windows partitioning. So much so that an error occured. After I wasn't able to boot back into Windows 10 and deleted ALL my files, I noticed that my maximum capacity was lowered from 256gb to 237gb. It was probably from the dual-booting error. (Was trying to dual-boot an android os or a linux os or smth). I'm running out of storage because I'm too lazy to delete files and I need that 19gb. Respond ASAP, Thanks!
Recommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7