1859 questions
msedge.exe
Wenn ich nach einem Systemscan durch Auslogics den Button für die möglichen Reparaturen drücke, erscheint die Aufforderung, bestimmte Apps erst abschalten zu lassen. Dafür wird fünfmal msedge.exe aufgezählt. Drücke ich den Button, der diese Anwendung(en) schließen soll, folgt die Mitteilung, das sei nicht möglich, ich solle es manuell machen. Alternativ kann ich anklicken, die Sache zu ignorieren.
Frage 1: Wenn ich es ignorieren kann (und gleich fünf mal), wofür ist es wichtig?
Frage 2: Wie schaltet man msedge.exe manuell ab?
Frage 1: Wenn ich es ignorieren kann (und gleich fünf mal), wofür ist es wichtig?
Frage 2: Wie schaltet man msedge.exe manuell ab?
Auslogic Defrag Issue
Defrag hung up on file C:\$Extend\$UsnJml:$J
Went from 3.8% to 13.30% completed and took over 22 hours as you can see in the screenshot attachment.
How can I get defrag around this issue so it can complete the optimization?
Thank you
Dennis Miller
Content hidden to protect privacy
P.S. Why isn't Auslogics a subcategory option?
Laptop slow on startup
Hi there,
I have a new laptop with a high spec. However, for the first hour each day, it runs as slowly as an old 486 machine, then suddenly it catches up with itself and runs superbly all day.
I've checked everything:
Programs in the Start menu
ESET and OneDrive behaviour
Updates behaviour
BIOS settings
Everything I can think of and a hundred things I've learned about...
I've uninstalled some of the programs, but now I'm thinking I should uninstall everything and reinstall Windows 10.
Any ideas before I try the Windows 10 reinstall?
NOTES (1) I did try the upgrade to Windows 11 when I first got the machine, however, I didn't like it and went back to Windows 10; it was slow in the short time that I ran Windows 11 too, so I don't konw if that means something, like maybe it's a hardware issue? (2) It was a demo machine in the store where I bought it.
I have a new laptop with a high spec. However, for the first hour each day, it runs as slowly as an old 486 machine, then suddenly it catches up with itself and runs superbly all day.
I've checked everything:
Programs in the Start menu
ESET and OneDrive behaviour
Updates behaviour
BIOS settings
Everything I can think of and a hundred things I've learned about...
I've uninstalled some of the programs, but now I'm thinking I should uninstall everything and reinstall Windows 10.
Any ideas before I try the Windows 10 reinstall?
NOTES (1) I did try the upgrade to Windows 11 when I first got the machine, however, I didn't like it and went back to Windows 10; it was slow in the short time that I ran Windows 11 too, so I don't konw if that means something, like maybe it's a hardware issue? (2) It was a demo machine in the store where I bought it.
Auslogics BoostSpeed 12について
「Auslogics BoostSpeed Pro12」「Auslogics Driver Updater」と「Disk Defrag Ultimate」のボタンがありますが、インストールすると別途、料金が発生するのでしょうか?
ignoring cache and thumbnails
Hi guys,
I want BS 12 to ignore clearing/deleting image thumbnails and chrome cahe.
How do I do that?
Please let me know
Regards
Luis
I want BS 12 to ignore clearing/deleting image thumbnails and chrome cahe.
How do I do that?
Please let me know
Regards
Luis
freeing Memory usage
Hi Guys,
I have noticed some apps reserves too much memory for itselfs like Google Chrome,
is it possible to get Auslogic Bootspeed 12 to free some of the memory on a regular basis, for example when it reaches 85% of usage?
also it would be nice to improve memory and CPU by disabbling things that are not required when we want to get out more performance from our PC,
The BS12 RAM and CPU optimization seems to be going into that direction, but require a little bit of more control over processes?
I have noticed some apps reserves too much memory for itselfs like Google Chrome,
is it possible to get Auslogic Bootspeed 12 to free some of the memory on a regular basis, for example when it reaches 85% of usage?
also it would be nice to improve memory and CPU by disabbling things that are not required when we want to get out more performance from our PC,
The BS12 RAM and CPU optimization seems to be going into that direction, but require a little bit of more control over processes?
Windows search indexer
Hi there,
Windows search indexer seems to be taking forever to finish.
I have restarted the process, limited the number of files to index and even disable the AV to allow indexer to index faster.
But after a while it comes back and keeps eating away between 60% to 24% of CPU
Any fix for that? runing on (win11 64 bits.
Windows search indexer seems to be taking forever to finish.
I have restarted the process, limited the number of files to index and even disable the AV to allow indexer to index faster.
But after a while it comes back and keeps eating away between 60% to 24% of CPU
Any fix for that? runing on (win11 64 bits.
Right Click opens very slowly
Right click on file explorer options (such as copy) takes forever to load. Right click on any file takes forwver to load options.
Tried to purchase Boostspeed Pro but website would not advance to chaeckout?
Tried to purchase Boostspeed Pro but website would not advance to chaeckout?
I am unable to switch to keyboard Chinese Input Method after using Auslogics BootstSpeed
After using the Auslogics BootstSpeed and the function of cleaning the Registry files, I found that I am not able to switch back to Chinese input method anymore and I can only type in English. I tried to type the hotkey "Left Ctrl +Shift", nothing happened. I tried "Ctrl + Space" or "Win + Space", also nothing happended. The small icon at shows "EN" at the bottom right corner was disappeared (see attached).
I tried to find the file "ctfmon.exe" and excute, but it doesn't work. I tried to add this command at the startup, it also doesn't work.
I tried to delete the language pack and reinstall, it also doesn't work.
The only moment that I can see the langauge menu comes out again is that when I was in the situation of "User Account Control" when the computer requires administrator status to run some program (see attached).
I am pretty desperate and really need your help. Thank you!
I tried to find the file "ctfmon.exe" and excute, but it doesn't work. I tried to add this command at the startup, it also doesn't work.
I tried to delete the language pack and reinstall, it also doesn't work.
The only moment that I can see the langauge menu comes out again is that when I was in the situation of "User Account Control" when the computer requires administrator status to run some program (see attached).
I am pretty desperate and really need your help. Thank you!
internet hızlandırma yaptıgımda hızım düşüyor
internet hızlandırma yaptıgımda hızım düşüyor 50 mbits fiber internetim var manuel ayarları bilmiyorum yardımcı olurmusunuz acaba?
boite mail
Bonjour j aurais besoin que vous m aidiez , je peux ouvrir ma boite mail depusi plusieurs jours la page était a a s'ouvrir donc je me deconnectais je remettais mon identifiants et mot de passe mais ce matin pu rien l ordi ne me donne pu la page poiur mettre ces infos martine_viellet@sfr.fr
Auslogics Boostspeed 12
My computer is a 64 bit machine which can run 32 bit programs. My computer is running Boostspeed 12 using 32 bit versions of all its programs instead of the 64 bit version. Is this the reason why my computer is taking over an hour to startup in the morning with the disk using 93% to the usual 100% all the time? Or, is the problem due to too much disk thrashing since it appears that all the startup programs start up immediately instead of being staggered per the scheduler? This problem started when I had to uninstall Boostspeed 12 and reinstall it per the Auslogics support person.
Gah. Cannot access Report
I have not been able to view any of the reports in the Auslogics software. I just get a blank window in Foxfire.
Auslogics BoostSpeed software itself
I have BoostSpeed perform Dashboard, Disk Defrag, Protect. Internet Optimizer and other checks by schedule. All is good.
However, directory "c:\ProgramData\Auslogics\BoostSpeed\12.x\Reports" becomes cluttered with .html, .xml and other reports produced by these various check tools.
How can I set BoostSpeed to automatically clean up after itself by deleting ancient reports over some arbitrary age? There's about a Gig of files in this directory on this machine and some 3Gb on another.
However, directory "c:\ProgramData\Auslogics\BoostSpeed\12.x\Reports" becomes cluttered with .html, .xml and other reports produced by these various check tools.
How can I set BoostSpeed to automatically clean up after itself by deleting ancient reports over some arbitrary age? There's about a Gig of files in this directory on this machine and some 3Gb on another.
random shut down of my laptop
recently my sony vaio laptop strted shutting of randomly. can you help.
Shreddern und Löschen
In dem Tool "File shredder" wird sowohl geshreddert als auch gelöscht.
Worin besteht der Unterschied?
Worin besteht der Unterschied?
Unintalled software packahe
I only use mu PC for flight simulation practive. Iecently uninstalled a program called Traffic Global. IT contined over twelve thousand files. Every time I run the Duplicate Filesprogram, the files continue to show up although I removed Traffiv Global weeks ago. Can you advise? Thanks!
Jack Sullivan
Jack Sullivan
ваш деинсталятор не удаляет эту программу
у меня ауслоджик про, платная версия. ваш деинсталятор не удаляет bluestacs.
BoostSpeed 13 BUG Issue
There is an aggravating "BUG" in BoostSpeed 13. A message frequently appears that states I have many TERABYTES of files in my Recycle Bin. See the attached screenshot.
I got this message today, while having less than 25 MB of files in my Recycle Bin.
Please look into this and fix this BUG.
Thank you.
Myron Achtman
Content hidden to protect privacy
activation Boostspeed
Hello,
I have been using Boostspeed pro for years, and now the software only opens in the free version, even when I copy the activation key received in December by email.
A window appears, saying "Registered software", yet the software remains in free version.
Can you help me solve this problem?
I have been using Boostspeed pro for years, and now the software only opens in the free version, even when I copy the activation key received in December by email.
A window appears, saying "Registered software", yet the software remains in free version.
Can you help me solve this problem?
python .dll error
i am encounteredwith the attached python.dll error, kindly let me know the solution.
i am using windows 7 , 64 bit.
i am using windows 7 , 64 bit.
удаление профиля печати принтера HP
Здравствуйте
программа - отличная, спасибо.
Единственное, что хотел отметить - после сканирования уничтожаются настроенные профили печати на принтере НР (или последние использованные параметры). Перед печатью пять их делать приходится
С уважением
Дмитрий
программа - отличная, спасибо.
Единственное, что хотел отметить - после сканирования уничтожаются настроенные профили печати на принтере НР (или последние использованные параметры). Перед печатью пять их делать приходится
С уважением
Дмитрий
Analyse pour ajustements Windows
Bonjour,
lorsque je fais l'analyse pour l'ajustement Windows , l'analyse ne va pas plus loin que 29% et puis j'attends des heures et c'est toujours à 26%.
Pourriez vous m'aider,
Cordialement
Hendrik Zutterman
lorsque je fais l'analyse pour l'ajustement Windows , l'analyse ne va pas plus loin que 29% et puis j'attends des heures et c'est toujours à 26%.
Pourriez vous m'aider,
Cordialement
Hendrik Zutterman
Windows Update, something went wrong
My sytem is no longer doing its windows updates, it always displays an error saying " something went wrong Try to reopen settings later"
Lizenz
Warum wurde meine Lizenz gesperrt ich kann das Programm nicht mehr öffnen ich habe im Dezember 2021 verlängert und gekauft. Bitte um Freischaltung. Danke
Unable to activate Auslogics Bootspeed 12 PRO Version
I have been having issues now for more than a week I keep getting the message the my PRO Version is not atctivated despite me doing it countless times. Please can you advise what to do.
Task Manager
Hi. I keep getting a report from Auslogics that a "High System Resources aare deteded". Clicking to see more takes me to the tak manager - but I have nno idea which of the dozens of running programss aare essential/nexcessary/vital and which are causing the problem. Can youo give me some guidance?
Donald
Donald
My Scanner
I ran My Scanner 5 times and there still something to fix. It is like this all the time, is there something I should do before I scan?
I am including a screen catched.
Parallels Desktop 18 Compatibility
I have an Apple iMac running macOS Monterey v12.4 with Parallels Desktop 18 and Windows 10.
I’d like to know, can BoostSpeed 12 run in this Virtual Machine environment without any issues?
PS: BoostSpeed 12 is not installed in the Virtual Machine environment yet. I’m simply trying to find out if it has been tested and will work before installing it on my iMac with Parallels Desktop 18.
I’d like to know, can BoostSpeed 12 run in this Virtual Machine environment without any issues?
PS: BoostSpeed 12 is not installed in the Virtual Machine environment yet. I’m simply trying to find out if it has been tested and will work before installing it on my iMac with Parallels Desktop 18.