Lost partition
My disk had a C: drive, for OS and D: drive for my files, photo's etc. While the c: drive was recovered, the d: drive has disappeared. How can I recover the D: drive, please?
Driver is Unavailable
G-HUB
Actualizaciónes
Bricked my HP Evo Prod ID 669a1ua after driver update
Only thing left seemed to be a clean install using flash drive media from MS website to download installer for W11 and then het drivers from HP. So...Flash installer W11 called-up a view of the diskpart showing X: as "System" with like 200MB, C: is the main partition with ~433GB and is BITLOCKED... and then there is a small Recovery partition.
So the only partition I might use was the Bitlocked one...thus I had to delete it and ReFormat to do the clean install.
...So far so good!
Now I go top HP and get my wlan drivers...install from recovery CMD using pnpuil...and I fire-up Windows.
I get the intro screen to select my language, then keyboard, then it hangs at "lets get you connected to the internet"
so - TWO questions: (1) what othe (critical) drivers might I need to get online? Here's the list of possibilities: https://support.hp.com/us-en/drivers/selfservice/closure/hp-spectre-x360-16-inch-2-in-1-laptop-pc-16-f1000/2101006126/model/2101006145 and
(2) I tried just installing "all" of the available drivers...but I ran out of room???
It seems that even when I'm at he C:\ prompt - everything I install actually goes to the X: partition [which has run out of space now...] Is there some kind of start-up initialization pointer thats redirrecting "System" traffic/commands to X: (instead of c:\Windows\System\System32 - where drivers usually reside?
- If so - how do I change it?
- If not then might it relate somehow to the fact that I never really "completed" the install process?
Also FYI - now that I have gotten around Bitlocker I tried the HP Cloud recovery again and got the same blind boot loop.
Thanks for your help
-Adam
Windows Update
DRIVER UPDATER REFUSES TO CONNECT
Thanks for your help!
James
heute kein Zugang zum Abruf der Treiber-Daten
Mots de passe
BootSpeed a chaque analyse du système, il me supprime les mot de passe et a chaque fois je suis obligé de resaisir ce dernier.
Comment effectuer de facon que BS ne supprime plus les mots de passe ?
Cordialement
Denis Schmitt
USB
now, the USB Ports on the front of the PC don't
work anymore. The back ones work fine.
Is there an easy fix?
Anti-virus
J'ai installé CCLEANER mais crains qu'il détruise des fichiers considérés comme étant des virus mais qui n'en sont pas comme par exemple "setup.exe". Windows Defender a complètement détruits des fichiers qui n'étaient en aucun cas des virus. Je n'ai pas réussi à les récupérer.
Dois-je craindre la même chose avec CCLEANER ?
Je vous remercie d'avance pour la réponse que vous voudrez bien me donner ...
Cordialement,
Eric
Velocidad de la computadora
Trial
Thanks in Advance
Fehlermeldung
Leider kann ich keine Software mit dem Programm mehr aktuallisieren es kommt immer dieselbe Fehlermeldung:
failed download failure
was verhindert die Aktuallisierung bei dem Programm.
Als Virus Programm nutze ich Kaspersky
Als Betriebssystem nutze ich Windows 10 Pro
mfg Klaus Schwabe
Clearing Privacy History issues
Looking at the past, the Neuroquila virus (circa around 1995) was the first (as far as I know) "polymorphing" virus. It created a "sacrificial virus" to "feed" any existing antivirus program on a machine so that while the antivirus was repairing the created virus the real virus could then attack the antivirus, making it, in the future, always retrun a "no virus found" message to the user. Next, as I recall... comes the concept of "nesting" where when you remove one thing another is created as that one is eliminated.
the above are just 2 examples of why I could be getting the results, daily, that I get BUT... I have stopped these programs after just doing an initial run of each and I have, many, many times stopped them short of doing an all out cleaning and I have done many "all out cleanings" (where I run each program multiple times) and there is a large difference in my end performance of the machine. PS... I do this on all 3 of the machines I have running and NO... I am not making money with my computers... I am a 71 year old man who's retired and od this for cheap thrills and to prove I haven't yet lost my sanity... thank you very much.
Sooooo.... I'd like to buy your program... but only if there's a component in it that let's me state how many times each component within it will run before it stops running.... cause sitting here and re-running these programs for over an hour everyday... just to keep my computer operating at a decent speed (2-I.7... 16 GB Mem, 500 GB SSD, 1- I.5 ... 16GB Mem, 500 GB SSD).
What I want is something I can configure to run multiple passes of the different compnents within your software so I can set it and then go do something else while it scours, re-scourts and rescours again as many times as I want it to.
Cool?
auslogics driver updater causes WINDOWS 10 to be disabled
The updater found 16 drivers that needed updating.
I did the updating and restarted the laptop.
The laptop then wouldnt start - I got the blue screen error message.
The only way I could get it working again, which took me 2 days, was to reset back to a restore point 2 weeks ago .
As a result I presume the driver updating never happened.
Is there anything I can do to get the Driver Updater to work without causing this significant error message?
Programa não esta fazendo scan
Does disappear language icon ?
tray icon
transferring data and Auslogics
Hi. This may be out of your field, but...
I am relaunching a small nonprofit. Part of the process is transferring files from a worn out laptop (using now) to a newer refurbished one. I'm using the free version of Auslogics Speed to clean up the old laptop before transferring data to new. We will be subscribing to the paid version for the newer laptop after I get the transfer done.
In the past, I've had to have someone transfer data using specific cables. Is there an Auslogics or other software that can be used to do the transfer without hardwiring? Novice here techwise. And, it's always been my experience that no matter how successful the data transfer, the folder and files have to be manually reconstructed. A work-around would be great.
I need t leave home now but will return about 4:30 Pacific. Yes, I know that's asking a lot, so I appreciate whatever you can share about the challenges I'm facing.
Onward,
Will Anderson
greenvegans.org
Empty Folder Cleaner and Windows
aidez-moi à installer Windows11 à partir de Winsdows10
Processeur Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz 2.20 GHz
Mémoire RAM installée 10,0 Go
ID de périphérique B97B8955-E5F7-4030-93CD-32FB22878060
ID de produit 00326-10000-00000-AA251
Type du système Système d’exploitation 64 bits, processeur x64
Stylet et fonction tactile La fonctionnalité d’entrée tactile ou avec un stylet n’est pas disponible sur cet écran
My BoostSpeed app will not recognise my Pro status
Examples of this issue in the atchd doc.
My BoostSpeed is the Pro level app and it is good for another 300+ days. However, the app does not know this fact. It will not allow me access to the Pro features. It requires me to buy the Pro level features. I do not understand how the app indicates I have Pro yet at the same time the app thinks I only have the free version.
I do have and have paid for Pro for the 300 days.
When I tired to re-register the Pro license key, it indicates I'm already Pro registered. Yeah, that's obvious. Why doesn't the app know this?
Thank you for your support and education. Shane Ostrom,