1859 questions

After Auslogics did some repairs, alot doesnt work

I really cant type out the problems im having all because there are so many... I just got a Performace Scan message from Auglogics as I am typing this message stating "its been 6 days since your last scan" but im afraid to run anything on auglogics. I need a Tech that knows computers very well to remote connect to my laptop and see if they can fix some if not all of these problems that came about. I will list some of the problems I am encountering but first I want to say that everthing did work before. I used to be a windows insider but now my diagnostic data is set to basic and i cant chage it to full.. In yellow, at the top of the windows settings page it now says that I do not have authorization or this setting is being controlled by your organizer. I dont have an Organizer. Ive never seen that Yellow Font orginazation control lock or what ever it is, ever before until about a week ago when i ran the last scan with auglogics. Its not just on that Diagnostic sending part, I find that I get that controlled by my orginazation lock out on all kinds of settings and controls. I work as a heavy equipment machinery driver and work doesnt even have comptures, im not in school or connected to any school account.. I bought my own brand new laptop about 3 months ago, its connected on my home network Optimum Internet and my outlook account isnt attached to anything but my Xbox One X and like i said it was never there before... I cant type in any Windows app or the task bar without having to hit the windows key + R and enter C:\Windows\System32\ctfmon.exe and then it works, but needs to be done everytime i turn my laptop on... I used to always have my Samsung Fit 64 gig tiny flat USB and my SDXC 64 gig 170Mbps read/write card set to enable read and write and catch. Not Readyboost.. but now i cant do that. both USB and SDXC are all over the place.. I have gigabyte speed from optimum and yet my whole computer runs slow... I cant type in the search bar and get my apps show up, or update, or power plan. nothing... AND for some reason, Ive NEVER had 4 accounts. when i turn my laptop on i can only log into my account like normal. but then when you look at the account users, theres administrator, then there is like 3 accounts of my name.. i dont know what to do

1434 views
May 06, 2020 at 04:31 PM

defrag ssd

you product wants to defrag and tweak my ssd is this safe?

1225 views
May 06, 2020 at 09:29 AM

Запуск Виндовс

Доброго времени суток. После пользования вашим продуктом у меня стало чтото не то с загрузкой виндовс. Сначала все идет нормально. Загрузка биоса. Потом заставка загрузки виндовс. Потом у меня экран отключается и в таком состоянии минут 15. Экран от ПК не получает никаких сигналов. Как мне это отключить? Что бы была нормальная загрузка рабочего стола после заставки загрузки виндовс? Это началось сразу же после использование Ауслоджик Буст Спида. Откат системы я сделать не могу.

1433 views
May 06, 2020 at 05:50 AM

Démarrage anormal

Bonjour,
J'utilise une unité ASUS N73SV sous Windows10 qui me donne entière satisfaction.
Logiciel de sécurité Kaspersky, Firewall Windows, Analyses périodiques par Auslogics Anti-Malware.
Aucune attaque virale jusqu'à aujourd'hui.
Depuis un an environ la touche habituelle de demarrage - au dessus du clavier à droite - ne fonctionne plus; le pc ne demarre pas.
Pour demarrer le pc, il faut appuyer sur la touchei se trouve tout au dessus du clavier à gauche, donc la symetrique de l'autre.
Mais au lieu d'activer directement Windows, cela active le Bios (son de boot tres fort) puis Windows (son de boot normal).
J'ai entrepris plusieurs fois de comprendre et réparer mais sans succès.
Je souhaite revenir à un fonctionnement normal.
Merci de votre aide.
Kind regards,
Jean Farny
1178 views
May 03, 2020 at 04:35 PM

Auslogics registry cleaner

Can certain categories be excluded when using registry cleaner?
REASON: after using registry cleaner I get an error message when I open MSMoney. I can correct this using Money setup, but registry cleaner does something to reverse my setup correction.

System: Windows 7 Home Premium

1386 views
Apr 29, 2020 at 10:41 PM

Отвалился BlueTooth

Добрый день
на обоих моих ноутбука пропал блутус. Возможно что то позволил исправить программе не проконтролировав. Как включить блютус снова? В скрытых девайсай его вижу. Система предлагаетпереустановить драйвер, но дело явно не в этом.

1460 views
Apr 29, 2020 at 06:00 AM

Здравствуйте, программа Auslogics не запускается вместе с включением компьютера, как исправить?

Здравствуйте, программа Auslogics не запускается вместе с включением компьютера, как исправить?

1265 views
Apr 29, 2020 at 01:50 AM

Disco duro se encuentra al 100%

Hola, ultimamente he notado que mi disco duro se encuentra al 100% y las aplicaciones se abren lento, cuando tenia windows 7 no me pasaba esto supongo que es por el sistema operativo tengo windows 10 pro, ¿habra una solucion para bajar el uso del disco ?

1269 views
Apr 28, 2020 at 02:59 AM

POST interruption

What could be the problem when most of the time during Boot on Message "Warning System Boot fail or post interruption".

Press continue or press del to load bios setup.

1209 views
Apr 27, 2020 at 08:51 AM

Why auslogics boostspeed can't solve this ?

Hello. I'm a regular gamer, but when I play a game, no matter which one, my computer always crashes. Everyday, for months. I have used boostspeed 11 many times to fix this, but despite what Auslogics promised, my computer is no more stable than before. Nothing has changed. So I’m wondering what it pays to pay for software that promises to take care of our computer’s system, if it’s just basic operations that don’t solve anything. If nothing changes, I will not renew my subscription. If you need information about my hardware, don't hesitate to ask me. Thank you. Sincerely, Arnaud

1289 views
Apr 27, 2020 at 08:32 AM

Malware

How can I minimize the picking up of malware by using your toolkit?

1711 views
Apr 25, 2020 at 10:50 PM

Temperature

I am using Windows 8.1. Is there a provision in BoostSpeed 11, for setting the Disk/Processor Temperature at which the PC will switch off?

1409 views
Apr 22, 2020 at 04:00 PM

ms-resource: ProductName を取り除きたい

Windows10 バージョン 2004 (OSビルド 19041.207)
スタートメニューのその他グループに

"ms-resource: ProductName"  を取り除きたい


このアプリは開かず、アンインストールもできない

2877 views
Apr 22, 2020 at 01:56 PM

sudden shutdown

why is my pc suddenly shuts down without warning every 10 to 20 minutes

1332 views
Apr 20, 2020 at 08:19 AM

OpenAL32.dll.

Пожалуйста посоветуйте файл OpenAL32.dll. последствия

1664 views
Apr 19, 2020 at 06:26 AM

Windows 10 logon password via Auslogics

Hello!
I am not new to Aulogics - great product! However, I am a new Aulogics 11 user. In Aulogics, in trying to bypass Windows 10 Logon on my Lenovo, I believe the password that was pre-autofilled may have been incorrect? I chose by-pass Windows logon, however when my laptop restarts the first User screen tells me my Password is incorrect. How do I fix this in Aulogics? Any help would be appreciated! ~Catherine Trager

Content hidden to protect privacy

1514 views
Apr 18, 2020 at 05:41 PM

Повышенное потребление ресурсов

Периодически всплывает уведомление о повышенном потреблении ресурсов. По клику открывается Task Manager, из информации в котором я понимаю только, что процессор загружен на 100%, оперативная память тоже. Я и сам замечаю, что компьютер часто тормозит и процессор нагревается до 50 градусов.
Компьютер новый (моноблок Lenovo, W10), программ в автозагрузке не более десяти. Прежний моноблок, которому более пяти лет с W 8.1, на котором установлено гораздо больше программ, ведёт себя гораздо резвее.
И что со всем этим делать? В Task Manager не вижу каких-либо инструментов. Уж не сама ли ваша программа Auslogics Boost Speed 11 тормозит систему?

1011 views
Apr 18, 2020 at 05:17 PM

Кэш второго уровня

Здравствуйте, в прошлых версиях была возможность через Tweak Manager включить исплользование кэша втрого уровня. В 11 версии неполучается найти данную функцию. Подскажите как это сделать.

1424 views
Apr 18, 2020 at 10:31 AM

System Restore

Desktop just started on off when sitting in sleep mode, A tried to update Microsoft Windows 10, took update, Still on off multi. times daily B, tried System restore tells me could not preform System Restore Still on ,off mode , C What setting in resuce center would fix this System Restore problem.s all from same date around System 3 or 4 from same date close to restore point date. Is Boostspeed 11 causing this problem

1412 views
Apr 16, 2020 at 06:59 PM

help needed

Hi, I don't think it's about you, but if you can help me I'll be very grateful.
i have two devices
1.micro sd 16GB apacer
2.flash memory 16GB apacer
these two device now is WRITE PROTECTED and i have download every tools and tricks exist in world for flash these but no one responding.
now pls pls pls pls pls pls help me in my country there is no official represent from apacer or others pls help me tnx a lot and i very respect u and ur works and apps

respectful.TOOFAN

1352 views
Apr 16, 2020 at 08:42 AM

Fix Broken Shortcuts

How does one fix/repair broken shortcuts. Auslogics gets hung up when using the Stability function.
679 views
Nov 24, 2021 at 04:36 AM

The JBL connected with Bluetooth Properly where in the sound output of windows 10 it does not appear

Hello
I conntected with Bluetooth the device - Speaker JBL Flip 5 (bluetooth connection only). It appear in the the Setting / bluetooth Devices of Windows 10

But in the setting of Windows 10 the device does not appear so I can not use it.

You gave me for the same quesion an answer for old windows (8) and for headset. I donot have Playback in the setting...

I tried to replace the driver, to update my windows 10 and restart,....It does not help

I'll be glad to have the right solution

thanks Dr. moti Leibowitz
678 views
Sep 09, 2022 at 03:54 PM

Run Command History

Hello,

Everytime Boost Speed runs automatic scanner on Sunday's the run commands history gets deleted. I have unchecked this option in the privacy settings in the software but this still keeps happening.
677 views
May 16, 2023 at 03:09 PM

full C drive

A problem with a small space on the C disk. How else to free up space on the C disk? Which program files can I transfer to an external disk and make win 10 work without problems?
676 views
Jun 26, 2022 at 11:23 PM

Выделенная память

Подскажите, почему у меня выделенной памяти всегда больше, чем используемой?
Как можно ее очищать? Вручную или атвоматически.
675 views
May 30, 2023 at 07:46 PM

Multiple Installations

Do I have the authority to install the full version on a laptop I have or must I buy another subscription? Thank you!
675 views
Feb 19, 2023 at 10:50 PM

duplicate files

Which duplicate files are safe to remove?
675 views
Dec 26, 2022 at 01:39 PM

DEFRAGMENTATION EINER SSD-FESTPLATTE

BoostSpeed12 bietet eine Defragmentierung auch für SSD-Festplatten an. Ist dies ratsam? Andere Computer-Experten raten davon ab!
674 views
Jun 24, 2022 at 02:31 PM

подключение устройства

При подключении ASMT USB 3.0 Destop H SCSI Disk Device система то видит его, то нет: предлагает отформатировать или обновить драйвер (обновила драйвер тома файловой системы WPD). Как сделать этот диск рабочим не отключая его от ПК (каждый раз монтировать и размонтировать...)?

! не видела данного устройства в выпадающем меню, выбрала другое...
674 views
May 18, 2023 at 08:38 AM

проблема с панелью задач

перестала работать панель задач
произошло это так - включаю я пк, немного поиграл, буквально минут 15-20, и меня встретил синий экран, который не смерти, а обычный синий экран ошибки, где пишут перезагрузка, проблема с чем-то (ну вы поняли, да ведь?), после перезагрузки начались проблемы с жёсткими дисками, но я их решил, и после решения проблем с дисками перестала работать панель задач, только открываются ярлыки разных приложений, а вот системные не работают, например пуск, поиск, звук, календарь, да даже настройки не открываются! всё перепробывал! и powershell, ну команды в нём и т.д., всякие приложения.
помогите пожалуйста!
674 views
Mar 20, 2023 at 06:41 PM

Random ping spikes

Recently, while I play games my computer has random lag spikes for a few seconds. My computer isnt even a year old yet and just started doing it, how do i fix it?
674 views
Dec 28, 2022 at 11:54 PM

Fragmentação de SSD

Meu Auslogics BoostSpeed 12, não está identificando meu SSD Patriot 480G.
673 views
Oct 29, 2022 at 06:03 AM

Windows Security and Explorer freeze.

I updated Windows 10 yesterday. Windows Security and Explorer freeze. When I run BoostSpeed13 ver.13.0.0.6, it freezes, but Windows Security and Explorer work normally without BoostSpeed13. Please tell me how to resolve.
673 views
Nov 16, 2023 at 01:53 AM

can not download .exe file

Everytime I try to download the newsest version of BootSpeed, my laptop saves it as an Adobe PDF file and will not open/install. Will completely removing the BootSpeed app and then downloading the newest version work around my problem?
672 views
Jul 24, 2022 at 05:46 PM

App error

This pops up on the system info, "application errors": Any fix for it?
Name, Value, Advanced
Application Error: Faulting application name: svchost.exe_FrameServer, version: 10.0.19041.1566, time stamp: 0x1f37eb46Faulting module name: RsProvider.dll, version: 1.30.0.0, time stamp: 0x57ee1a06Exception code: 0xc0000005Fault offset: 0x000000000007bd6dFaulting process id: 0x2300Faulting application start time: 0x01d883048cd13be0Faulting application path: C:\WINDOWS\System32\svchost.exeFaulting module path: C:\Program Files\Realtek\RsProviders\RsProvider.dllReport Id: ff0c9809-f014-46e1-8f75-b7775e36760aFaulting package full name: Faulting package-relative application ID: 6/18/2022 6:14:18 AM
670 views
Jun 18, 2022 at 11:41 AM

le van hoa

sao khong kich hoat kye duoc
670 views
Dec 31, 2022 at 09:21 PM

何回cleanningをおこなってもデフラグや調整項目がある

PCのクリーンアップを目指してscanを行っていますが、何回行ってもデフラグや調整項目が表示されます。
PCのどこかに、基本的な問題点があるのか心配しています。
668 views
Nov 27, 2022 at 09:49 AM

New Problem Notifiction

Now, everytime I turn on my computer, I get this notification and I don't know what the problem is.
668 views
Nov 27, 2022 at 08:25 PM

Cannot access tools

I tried to access tools on Boostspeed 13 but got notice "LIbrary not registered" How do I fix this?
668 views
Mar 31, 2024 at 03:21 AM

Program not registered

As you can see in the attached show is registred, but the program says need to rgister for pro version. Please advise as I have renewed the license in december.

Thank you
668 views
Jan 25, 2022 at 08:58 PM